Enable the UFS found on the SM7125 Xiaomi smartphones.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: David Wronek <davidwronek@gmail.com>
---
 .../boot/dts/qcom/sm7125-xiaomi-common.dtsi      | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
index e55cd83c19b8..22ad8a25217e 100644
--- a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
@@ -398,6 +398,22 @@ sd-cd-pins {
 	};
 };
 
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l19a_3p0>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_l12a_1p8>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p23>;
+	vdda-phy-max-microamp = <62900>;
+	vdda-pll-max-microamp = <18300>;
+	status = "okay";
+};
+
 &usb_1 {
 	qcom,select-utmi-as-pipe-clk;
 	status = "okay";
-- 
2.42.1

On 11/17/23 21:08, David Wronek wrote:
> Enable the UFS found on the SM7125 Xiaomi smartphones.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: David Wronek <davidwronek@gmail.com>
> ---
>   .../boot/dts/qcom/sm7125-xiaomi-common.dtsi      | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
> index e55cd83c19b8..22ad8a25217e 100644
> --- a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
> @@ -398,6 +398,22 @@ sd-cd-pins {
>   	};
>   };
>   
> +&ufs_mem_hc {
> +	vcc-supply = <&vreg_l19a_3p0>;
> +	vcc-max-microamp = <600000>;
> +	vccq2-supply = <&vreg_l12a_1p8>;
> +	vccq2-max-microamp = <600000>;
> +	status = "okay";
> +};
> +
> +&ufs_mem_phy {
> +	vdda-phy-supply = <&vreg_l4a_0p88>;
> +	vdda-pll-supply = <&vreg_l3c_1p23>;
> +	vdda-phy-max-microamp = <62900>;
> +	vdda-pll-max-microamp = <18300>;
These regulators need regulator-allow-set-load and allowed-modes

Konrad