> On 15.11.2023 14:34, Justin Lai wrote:
> > Implement the pci_driver suspend function to enable the device to
> > sleep, and implement the resume function to enable the device to
> > resume operation.
> >
> > Signed-off-by: Justin Lai <justinlai0215@realtek.com>
> > ---
> > .../net/ethernet/realtek/rtase/rtase_main.c | 64 +++++++++++++++++++
> > 1 file changed, 64 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > index 12607663dd72..b7679b74cc8a 100644
> > --- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > @@ -2323,12 +2323,76 @@ static void rtase_shutdown(struct pci_dev
> *pdev)
> > rtase_reset_interrupt(pdev, tp); }
> >
> > +#ifdef CONFIG_PM
> > +static int rtase_suspend(struct pci_dev *pdev, pm_message_t state) {
> > + struct net_device *dev = pci_get_drvdata(pdev);
> > +
> > + if (!netif_running(dev))
> > + goto out;
> > +
> > + netif_stop_queue(dev);
> > + netif_carrier_off(dev);
> > + netif_device_detach(dev);
> > + rtase_hw_reset(dev);
> > +
> > +out:
> > + pci_save_state(pdev);
> > +
> > + return 0;
> > +}
> > +
> > +static int rtase_resume(struct pci_dev *pdev) {
> > + struct net_device *dev = pci_get_drvdata(pdev);
> > + struct rtase_private *tp = netdev_priv(dev);
> > + int ret;
> > +
> > + pci_set_power_state(pdev, PCI_D0);
> > + pci_restore_state(pdev);
> > + pci_enable_wake(pdev, PCI_D0, 0);
> > +
>
> IMO this is done by the PCI core already. See other drivers and PCI core code.
Thank you, I will check this part.
>
> > + /* restore last modified mac address */
> > + rtase_rar_set(tp, dev->dev_addr);
> > +
> > + if (!netif_running(dev))
> > + goto out;
> > +
> > + rtase_wait_for_quiescence(dev);
> > +
> > + rtase_tx_clear(tp);
> > + rtase_rx_clear(tp);
> > +
> > + ret = rtase_init_ring(dev);
> > + if (ret) {
> > + netdev_err(dev, "unable to init ring\n");
> > + rtase_free_desc(tp);
> > + return -ENOMEM;
> > + }
> > +
> > + rtase_hw_config(dev);
> > + /* always link, so start to transmit & receive */
> > + rtase_hw_start(dev);
> > +
> > + netif_carrier_on(dev);
> > + netif_wake_queue(dev);
> > + netif_device_attach(dev);
> > +
> > +out:
> > + return 0;
> > +}
> > +#endif /* CONFIG_PM */
> > +
> > static struct pci_driver rtase_pci_driver = {
> > .name = KBUILD_MODNAME,
> > .id_table = rtase_pci_tbl,
> > .probe = rtase_init_one,
> > .remove = rtase_remove_one,
> > .shutdown = rtase_shutdown,
> > +#ifdef CONFIG_PM
> > + .suspend = rtase_suspend,
> > + .resume = rtase_resume,
>
> Use pm_sleep_ptr and related macros then you don't need the conditional
> compiling.
Thanks for your suggestion, I will modify this driver.
>
> > +#endif
> > };
> >
> > module_pci_driver(rtase_pci_driver);