Add a PHY configuration sequence for the sc8280xp which uses a Qualcomm
Gen 2 version 1.1 CSI-2 PHY.

The PHY can be configured as two phase or three phase in C-PHY or D-PHY
mode. This configuration supports two-phase D-PHY mode.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     | 85 ++++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index f50e2235c37fc..2eb3531ffd00b 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -148,6 +148,91 @@ csiphy_reg_t lane_regs_sdm845[5][14] = {
 	},
 };
 
+/* GEN2 1.1 2PH */
+static const struct
+csiphy_reg_t lane_regs_sc8280xp[5][14] = {
+	{
+		{0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0034, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x001C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0028, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0000, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0008, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+		{0x000c, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x0010, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0060, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0064, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	},
+	{
+		{0x0704, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0734, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x071C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0714, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0700, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0708, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+		{0x070C, 0xA5, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0710, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0738, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0760, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0764, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	},
+	{
+		{0x0204, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0234, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x021C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0214, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0228, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0200, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0208, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+		{0x020C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x0210, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0238, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0260, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0264, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	},
+	{
+		{0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0434, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x041C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0428, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0400, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0408, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+		{0x040C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x0410, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0460, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0464, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	},
+	{
+		{0x0604, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0634, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x061C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0614, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0628, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0600, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0608, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+		{0x060C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x0610, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0638, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0660, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0664, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	},
+};
+
 /* GEN2 1.2.1 2PH */
 static const struct
 csiphy_reg_t lane_regs_sm8250[5][20] = {

-- 
2.42.0

On 11/5/23 18:45, Bryan O'Donoghue wrote:
> Add a PHY configuration sequence for the sc8280xp which uses a Qualcomm
> Gen 2 version 1.1 CSI-2 PHY.
> 
> The PHY can be configured as two phase or three phase in C-PHY or D-PHY
> mode. This configuration supports two-phase D-PHY mode.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
Makes it sound like the current 2ph/3ph split is rather nonsensical?

Perhaps we should restructure it to match hw revision? Especially since
one can get it from the hardware itself..

Konrad

On 07/11/2023 21:43, Konrad Dybcio wrote:
> 
> 
> On 11/5/23 18:45, Bryan O'Donoghue wrote:
>> Add a PHY configuration sequence for the sc8280xp which uses a Qualcomm
>> Gen 2 version 1.1 CSI-2 PHY.
>>
>> The PHY can be configured as two phase or three phase in C-PHY or D-PHY
>> mode. This configuration supports two-phase D-PHY mode.
>>
>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>> ---
> Makes it sound like the current 2ph/3ph split is rather nonsensical?
> 
> Perhaps we should restructure it to match hw revision? Especially since
> one can get it from the hardware itself..
> 
> Konrad

For the C-PHY though we have to either add or remove caps - I forget 
which on ~ all of our reference platforms.

"The PHY can do it" but I'd be surprised to find there's a single real 
implementation of it outside of a silicon test bench.

---
bod