Convert the lm87 hwmon sensor bindings to DT schema

Signed-off-by: Li peiyu <579lpy@gmail.com>
---
Changes for v3:
- add type definition of has-temp3, has-in6, has-in7
- Change the description of has-temp3
Changes for v2:
- replace node name lm87 with sensor
- replace character '\t' with spaces

 .../devicetree/bindings/hwmon/lm87.txt        | 30 ---------
 .../devicetree/bindings/hwmon/lm87.yaml       | 62 +++++++++++++++++++
 2 files changed, 62 insertions(+), 30 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt
 create mode 100644 Documentation/devicetree/bindings/hwmon/lm87.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
deleted file mode 100644
index 758ff398b67b..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm87.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-*LM87 hwmon sensor.
-
-Required properties:
-- compatible: Should be
-	"ti,lm87"
-
-- reg: I2C address
-
-optional properties:
-- has-temp3: This configures pins 18 and 19 to be used as a second
-             remote temperature sensing channel. By default the pins
-             are configured as voltage input pins in0 and in5.
-
-- has-in6: When set, pin 5 is configured to be used as voltage input
-           in6. Otherwise the pin is set as FAN1 input.
-
-- has-in7: When set, pin 6 is configured to be used as voltage input
-           in7. Otherwise the pin is set as FAN2 input.
-
-- vcc-supply: a Phandle for the regulator supplying power, can be
-              configured to measure 5.0V power supply. Default is 3.3V.
-
-Example:
-
-lm87@2e {
-	compatible = "ti,lm87";
-	reg = <0x2e>;
-	has-temp3;
-	vcc-supply = <&reg_5v0>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.yaml b/Documentation/devicetree/bindings/hwmon/lm87.yaml
new file mode 100644
index 000000000000..587191c663d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm87.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lm87.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM87 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    const: ti,lm87
+
+  reg:
+    maxItems: 1
+
+  has-temp3:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      When set, pins 18 and 19 are configured to be used as a second 
+      remote temperature sensing channel. Otherwise the pins are
+      configured as voltage input pins in0 and in5.
+
+  has-in6:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      When set, pin 5 is configured to be used as voltage input in6.
+      Otherwise the pin is set as FAN1 input.
+
+  has-in7:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      When set, pin 6 is configured to be used as voltage input in7.
+      Otherwise the pin is set as FAN2 input.
+
+  vcc-supply:
+    description: |
+      A Phandle for the regulator supplying power, can be configured to
+      measure 5.0V power supply. Default is 3.3V.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@2e {
+        compatible = "ti,lm87";
+        reg = <0x2e>;
+        has-temp3;
+        vcc-supply = <&reg_5v0>;
+      };
+    };
-- 
2.34.1

On 28/10/2023 10:20, Li peiyu wrote:
> Convert the lm87 hwmon sensor bindings to DT schema
> 
> Signed-off-by: Li peiyu <579lpy@gmail.com>
> ---
> Changes for v3:
> - add type definition of has-temp3, has-in6, has-in7
> - Change the description of has-temp3
> Changes for v2:
> - replace node name lm87 with sensor
> - replace character '\t' with spaces
> 
>  .../devicetree/bindings/hwmon/lm87.txt        | 30 ---------
>  .../devicetree/bindings/hwmon/lm87.yaml       | 62 +++++++++++++++++++

Nothing improved.

Stop ignoring feedback. You must respond to it or implement it.

Best regards,
Krzysztof

>
> On 28/10/2023 10:20, Li peiyu wrote:
> > Convert the lm87 hwmon sensor bindings to DT schema
> >
> > Signed-off-by: Li peiyu <579lpy@gmail.com>
> > ---
> > Changes for v3:
> > - add type definition of has-temp3, has-in6, has-in7
> > - Change the description of has-temp3
> > Changes for v2:
> > - replace node name lm87 with sensor
> > - replace character '\t' with spaces
> >
> >  .../devicetree/bindings/hwmon/lm87.txt        | 30 ---------
> >  .../devicetree/bindings/hwmon/lm87.yaml       | 62 +++++++++++++++++++
>
> Nothing improved.
>
> Stop ignoring feedback. You must respond to it or implement it.
>
> Best regards,
> Krzysztof
>
I'm so sorry for that.For v3 I just run make dt_binding_check and forget to
run checkpatch.pl,resulting in not finding an extra space.Now running the
dt_binding_check on my computer will cause an error regarding the
ti,ds90ub960.yaml
file when I specify the file to be checked as lm87.yaml. This error will occur
even if I specify other files, I am not sure if it will have an
impact.I'll submit
v4.If there are still issues,please tell me the reason again.Sorry again.

Thanks,
Li peiyu

On 28/10/2023 13:59, peiyu li wrote:
>>
>> On 28/10/2023 10:20, Li peiyu wrote:
>>> Convert the lm87 hwmon sensor bindings to DT schema
>>>
>>> Signed-off-by: Li peiyu <579lpy@gmail.com>
>>> ---
>>> Changes for v3:
>>> - add type definition of has-temp3, has-in6, has-in7
>>> - Change the description of has-temp3
>>> Changes for v2:
>>> - replace node name lm87 with sensor
>>> - replace character '\t' with spaces
>>>
>>>  .../devicetree/bindings/hwmon/lm87.txt        | 30 ---------
>>>  .../devicetree/bindings/hwmon/lm87.yaml       | 62 +++++++++++++++++++
>>
>> Nothing improved.
>>
>> Stop ignoring feedback. You must respond to it or implement it.
>>
>> Best regards,
>> Krzysztof
>>
> I'm so sorry for that.For v3 I just run make dt_binding_check and forget to

You even removed my address when replying this!

> run checkpatch.pl,resulting in not finding an extra space.Now running the
> dt_binding_check on my computer will cause an error regarding the
> ti,ds90ub960.yaml
> file when I specify the file to be checked as lm87.yaml. This error will occur
> even if I specify other files, I am not sure if it will have an
> impact.I'll submit
> v4.If there are still issues,please tell me the reason again.Sorry again.


v4 did not improve. Please explain me carefully how did you implement
these two feedbacks from first version, so 25th of Oct:

> Please use scripts/get_maintainers.pl to get a list of necessary
people and lists to CC.

> Also, please use filename like compatible.

Best regards,
Krzysztof

On Sat, Oct 28, 2023 at 10:58 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> You even removed my address when replying this!
>
> > run checkpatch.pl,resulting in not finding an extra space.Now running the
> > dt_binding_check on my computer will cause an error regarding the
> > ti,ds90ub960.yaml
> > file when I specify the file to be checked as lm87.yaml. This error will occur
> > even if I specify other files, I am not sure if it will have an
> > impact.I'll submit
> > v4.If there are still issues,please tell me the reason again.Sorry again.
>
>
> v4 did not improve. Please explain me carefully how did you implement
> these two feedbacks from first version, so 25th of Oct:
>
> > Please use scripts/get_maintainers.pl to get a list of necessary
> people and lists to CC.
>

I will send the next patch to all necessary people and cc all necessary lists.

> > Also, please use filename like compatible.
>

In the next version I will change the file name to "ti,lm87.yaml",
which is the same as "compatible".

> Best regards,
> Krzysztof
>

Thanks,
Li peiyu