On Mon, Oct 16, 2023 at 11:12:56AM +0200, Linus Walleij wrote:
> When adding a proper schema for the Marvell mx88e6xxx switch,
> the scripts start complaining about this embedded example:
>
> dtschema/dtc warnings/errors:
> net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells'
> is a required property
> from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
> net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells'
> is a required property
> from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
>
> Fix this up by extending the example.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
> index 3a3325168048..ee677cf7df4e 100644
> --- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
> +++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
> @@ -56,6 +56,12 @@ examples:
>
> ports {
> /* Port definitions */
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + };
Could you just skip defining any port, and just leave the /* Port definitions */
comment at the end (after the newly added #address-cells and #size-cells)?
This example is more about the USB adapter, not about the switch.
> };
>
> mdio {
>
> --
> 2.34.1
>