Add a master driver to support the AMD 1-Wire programmable logic IP block.
This block guarantees protocol timing for driving off-board devices such as thermal sensors, proms, etc.

Kris Chaplin (2):
  dt-bindings: w1: Add YAML DT Schema for AMD w1 master and MAINTAINERS
    entry
  w1: Add 1-wire master driver for AMD programmable logic IP Core

 .../bindings/w1/amd,axi-1wire-master.yaml     |  44 ++
 MAINTAINERS                                   |   8 +
 drivers/w1/masters/Kconfig                    |  11 +
 drivers/w1/masters/Makefile                   |   1 +
 drivers/w1/masters/amd_w1.c                   | 422 ++++++++++++++++++
 5 files changed, 486 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/w1/amd,axi-1wire-master.yaml
 create mode 100644 drivers/w1/masters/amd_w1.c

-- 
2.42.GIT

Changes since v1:
 Updated IP name and binding to axi-1wire-host and filenames to match
 Comment pruning where operation obvious, additional comments where not
 Unwrapped helper functions for register read/writes
 Removed un-necessary device reset on fail to add device
 Fixed duplicate clock disable in remove function
 Move bus master structure to per instance
 Improved hardware testing with multiple w1 instances

Add a host driver to support the AMD 1-Wire programmable logic IP block.
This block guarantees protocol timing for driving off-board devices such as thermal sensors, proms, etc.

Kris Chaplin (2):
  dt-bindings: w1: Add YAML DT schema for AMD AXI w1 host and
    MAINTAINERS entry
  w1: Add AXI 1-wire host driver for AMD programmable logic IP core

 .../bindings/w1/amd,axi-1wire-host.yaml       |  44 ++
 MAINTAINERS                                   |   8 +
 drivers/w1/masters/Kconfig                    |  11 +
 drivers/w1/masters/Makefile                   |   1 +
 drivers/w1/masters/amd_axi_w1.c               | 395 ++++++++++++++++++
 5 files changed, 459 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
 create mode 100644 drivers/w1/masters/amd_axi_w1.c

-- 
2.42.GIT

On Thu, Oct 19, 2023 at 07:24:16AM -0700, Kris Chaplin wrote:
> Changes since v1:
>  Updated IP name and binding to axi-1wire-host and filenames to match
>  Comment pruning where operation obvious, additional comments where not
>  Unwrapped helper functions for register read/writes
>  Removed un-necessary device reset on fail to add device
>  Fixed duplicate clock disable in remove function
>  Move bus master structure to per instance
>  Improved hardware testing with multiple w1 instances
> 
> Add a host driver to support the AMD 1-Wire programmable logic IP block.
> This block guarantees protocol timing for driving off-board devices such as thermal sensors, proms, etc.

btw, please do not send a vN as a response to the v(N-1) patchset. It
ends up hiding things in the depths of people's mailboxes that sort by
threads.

Cheers,
Conor.

> 
> Kris Chaplin (2):
>   dt-bindings: w1: Add YAML DT schema for AMD AXI w1 host and
>     MAINTAINERS entry
>   w1: Add AXI 1-wire host driver for AMD programmable logic IP core
> 
>  .../bindings/w1/amd,axi-1wire-host.yaml       |  44 ++
>  MAINTAINERS                                   |   8 +
>  drivers/w1/masters/Kconfig                    |  11 +
>  drivers/w1/masters/Makefile                   |   1 +
>  drivers/w1/masters/amd_axi_w1.c               | 395 ++++++++++++++++++
>  5 files changed, 459 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
>  create mode 100644 drivers/w1/masters/amd_axi_w1.c
> 
> -- 
> 2.42.GIT
> 

Add YAML DT schema for the AMD AXI w1 host IP.

This hardware guarantees protocol timing for driving off-board devices such
as thermal sensors, proms, etc using the 1wire protocol.

Add MAINTAINERS entry for DT schema.

Co-developed-by: Thomas Delev <thomas.delev@amd.com>
Signed-off-by: Thomas Delev <thomas.delev@amd.com>
Signed-off-by: Kris Chaplin <kris.chaplin@amd.com>
---
 .../bindings/w1/amd,axi-1wire-host.yaml       | 44 +++++++++++++++++++
 MAINTAINERS                                   |  7 +++
 2 files changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml

diff --git a/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
new file mode 100644
index 000000000000..ef70fa2c0c5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/amd,axi-1wire-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD AXI 1-wire bus host for programmable logic
+
+maintainers:
+  - Kris Chaplin <kris.chaplin@amd.com>
+
+properties:
+  compatible:
+    const: amd,axi-1wire-host
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    onewire@a0000000 {
+        compatible = "amd,axi-1wire-host";
+        reg = <0xa0000000 0x10000>;
+        clocks = <&zynqmp_clk 0x47>;
+        interrupts = <GIC_SPI 0x59 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 7a7bd8bd80e9..3dacb7ed6e3b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -890,6 +890,13 @@ Q:	https://patchwork.kernel.org/project/linux-rdma/list/
 F:	drivers/infiniband/hw/efa/
 F:	include/uapi/rdma/efa-abi.h
 
+AMD AXI W1 DRIVER
+M:	Kris Chaplin <kris.chaplin@amd.com>
+R:	Thomas Delev <thomas.delev@amd.com>
+R:	Michal Simek <michal.simek@amd.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
+
 AMD CDX BUS DRIVER
 M:	Nipun Gupta <nipun.gupta@amd.com>
 M:	Nikhil Agarwal <nikhil.agarwal@amd.com>
-- 
2.42.GIT

On Thu, Oct 19, 2023 at 07:24:17AM -0700, Kris Chaplin wrote:
> Add YAML DT schema for the AMD AXI w1 host IP.
> 
> This hardware guarantees protocol timing for driving off-board devices such
> as thermal sensors, proms, etc using the 1wire protocol.
> 
> Add MAINTAINERS entry for DT schema.
> 
> Co-developed-by: Thomas Delev <thomas.delev@amd.com>
> Signed-off-by: Thomas Delev <thomas.delev@amd.com>
> Signed-off-by: Kris Chaplin <kris.chaplin@amd.com>
> ---
>  .../bindings/w1/amd,axi-1wire-host.yaml       | 44 +++++++++++++++++++
>  MAINTAINERS                                   |  7 +++
>  2 files changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
> 
> diff --git a/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
> new file mode 100644
> index 000000000000..ef70fa2c0c5d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
> @@ -0,0 +1,44 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/w1/amd,axi-1wire-host.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AMD AXI 1-wire bus host for programmable logic
> +
> +maintainers:
> +  - Kris Chaplin <kris.chaplin@amd.com>
> +
> +properties:
> +  compatible:
> +    const: amd,axi-1wire-host

I was happy with it before, and still am I guess, given that there is an
IP version register that can be used to determine which version of the
IP is in use.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.

> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    onewire@a0000000 {
> +        compatible = "amd,axi-1wire-host";
> +        reg = <0xa0000000 0x10000>;
> +        clocks = <&zynqmp_clk 0x47>;
> +        interrupts = <GIC_SPI 0x59 IRQ_TYPE_LEVEL_HIGH>;
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7a7bd8bd80e9..3dacb7ed6e3b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -890,6 +890,13 @@ Q:	https://patchwork.kernel.org/project/linux-rdma/list/
>  F:	drivers/infiniband/hw/efa/
>  F:	include/uapi/rdma/efa-abi.h
>  
> +AMD AXI W1 DRIVER
> +M:	Kris Chaplin <kris.chaplin@amd.com>
> +R:	Thomas Delev <thomas.delev@amd.com>
> +R:	Michal Simek <michal.simek@amd.com>
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
> +
>  AMD CDX BUS DRIVER
>  M:	Nipun Gupta <nipun.gupta@amd.com>
>  M:	Nikhil Agarwal <nikhil.agarwal@amd.com>
> -- 
> 2.42.GIT
> 

On 10/19/23 16:30, Conor Dooley wrote:
> On Thu, Oct 19, 2023 at 07:24:17AM -0700, Kris Chaplin wrote:
>> Add YAML DT schema for the AMD AXI w1 host IP.
>>
>> This hardware guarantees protocol timing for driving off-board devices such
>> as thermal sensors, proms, etc using the 1wire protocol.
>>
>> Add MAINTAINERS entry for DT schema.
>>
>> Co-developed-by: Thomas Delev <thomas.delev@amd.com>
>> Signed-off-by: Thomas Delev <thomas.delev@amd.com>
>> Signed-off-by: Kris Chaplin <kris.chaplin@amd.com>
>> ---
>>   .../bindings/w1/amd,axi-1wire-host.yaml       | 44 +++++++++++++++++++
>>   MAINTAINERS                                   |  7 +++
>>   2 files changed, 51 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
>> new file mode 100644
>> index 000000000000..ef70fa2c0c5d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
>> @@ -0,0 +1,44 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/w1/amd,axi-1wire-host.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: AMD AXI 1-wire bus host for programmable logic
>> +
>> +maintainers:
>> +  - Kris Chaplin <kris.chaplin@amd.com>
>> +
>> +properties:
>> +  compatible:
>> +    const: amd,axi-1wire-host
> 
> I was happy with it before, and still am I guess, given that there is an
> IP version register that can be used to determine which version of the
> IP is in use.
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

I think we discussed that already that identification register should be 
described as the part of commit message to make this clear.

Thanks,
Michal

Thank you Connor and Michal,
>> I was happy with it before, and still am I guess, given that there is an
>> IP version register that can be used to determine which version of the
>> IP is in use.
>> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>
> I think we discussed that already that identification register should 
> be described as the part of commit message to make this clear.
>
Yes we did - thanks for the reminder, and my bad for the omission.

Add a host driver to support the AMD 1-Wire programmable logic IP block.
This block guarantees protocol timing for driving off-board devices such
as thermal sensors, proms, etc.

Add file to MAINTAINERS

Co-developed-by: Thomas Delev <thomas.delev@amd.com>
Signed-off-by: Thomas Delev <thomas.delev@amd.com>
Signed-off-by: Kris Chaplin <kris.chaplin@amd.com>
---
 MAINTAINERS                     |   1 +
 drivers/w1/masters/Kconfig      |  11 +
 drivers/w1/masters/Makefile     |   1 +
 drivers/w1/masters/amd_axi_w1.c | 395 ++++++++++++++++++++++++++++++++
 4 files changed, 408 insertions(+)
 create mode 100644 drivers/w1/masters/amd_axi_w1.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 3dacb7ed6e3b..c31b17df3be9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -896,6 +896,7 @@ R:	Thomas Delev <thomas.delev@amd.com>
 R:	Michal Simek <michal.simek@amd.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml
+F:	drivers/w1/masters/amd_axi_w1.c
 
 AMD CDX BUS DRIVER
 M:	Nipun Gupta <nipun.gupta@amd.com>
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index ad316573288a..513c0b114337 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -5,6 +5,17 @@
 
 menu "1-wire Bus Masters"
 
+config W1_MASTER_AMD_AXI
+	tristate "AMD AXI 1-wire bus host"
+	help
+	  Say Y here is you want to support the AMD AXI 1-wire IP core.
+	  This driver makes use of the programmable logic IP to perform
+	  correctly timed 1 wire transactions without relying on GPIO timing
+	  through the kernel.
+
+	  This driver can also be built as a module.  If so, the module will be
+	  called amd_w1_axi.
+
 config W1_MASTER_MATROX
 	tristate "Matrox G400 transport layer for 1-wire"
 	depends on PCI
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index c5d85a827e52..6c5a21f9b88c 100644
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -3,6 +3,7 @@
 # Makefile for 1-wire bus master drivers.
 #
 
+obj-$(CONFIG_W1_MASTER_AMD_AXI)		+= amd_axi_w1.o
 obj-$(CONFIG_W1_MASTER_MATROX)		+= matrox_w1.o
 obj-$(CONFIG_W1_MASTER_DS2490)		+= ds2490.o
 obj-$(CONFIG_W1_MASTER_DS2482)		+= ds2482.o
diff --git a/drivers/w1/masters/amd_axi_w1.c b/drivers/w1/masters/amd_axi_w1.c
new file mode 100644
index 000000000000..24a05c2de5f1
--- /dev/null
+++ b/drivers/w1/masters/amd_axi_w1.c
@@ -0,0 +1,395 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * amd_axi_w1 - AMD 1Wire programmable logic bus host driver
+ *
+ * Copyright (C) 2022-2023 Advanced Micro Devices, Inc. All Rights Reserved.
+ */
+
+#include <linux/atomic.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+
+#include <linux/w1.h>
+
+/* 1-wire AMD IP definition */
+#define AXIW1_IPID	0x10ee4453
+/* Registers offset */
+#define AXIW1_INST_REG	0x0
+#define AXIW1_CTRL_REG	0x4
+#define AXIW1_IRQE_REG	0x8
+#define AXIW1_STAT_REG	0xC
+#define AXIW1_DATA_REG	0x10
+#define AXIW1_IPVER_REG	0x18
+#define AXIW1_IPID_REG	0x1C
+/* Instructions */
+#define AXIW1_INITPRES	0x0800
+#define AXIW1_READBIT	0x0C00
+#define AXIW1_WRITEBIT	0x0E00
+#define AXIW1_READBYTE	0x0D00
+#define AXIW1_WRITEBYTE	0x0F00
+/* Status flag masks */
+#define AXIW1_DONE	BIT(0)
+#define AXIW1_READY	BIT(4)
+#define AXIW1_PRESENCE	BIT(31)
+#define AXIW1_MAJORVER_MASK	GENMASK(23, 8)
+#define AXIW1_MINORVER_MASK	GENMASK(7, 0)
+/* Control flag */
+#define AXIW1_GO	BIT(0)
+#define AXI_CLEAR	0
+#define AXI_RESET	BIT(31)
+#define AXIW1_READDATA	BIT(0)
+/* Interrupt Enable */
+#define AXIW1_READY_IRQ_EN	BIT(4)
+#define AXIW1_DONE_IRQ_EN	BIT(0)
+
+#define AXIW1_TIMEOUT	msecs_to_jiffies(100)
+
+#define DRIVER_NAME	"amd_axi_w1"
+
+struct amd_axi_w1_local {
+	struct device *dev;
+	void __iomem *base_addr;
+	int irq;
+	atomic_t flag;			/* Set on IRQ, cleared once serviced */
+	wait_queue_head_t wait_queue;
+	struct w1_bus_master bus_host;
+};
+
+/**
+ * amd_axi_w1_wait_irq_interruptible_timeout() - Wait for IRQ with timeout.
+ *
+ * @amd_axi_w1_local:	Pointer to device structure
+ * @IRQ:		IRQ channel to wait on
+ *
+ * Return:		%0 - OK, %-EINTR - Interrupted, %-EBUSY - Timed out
+ */
+static int amd_axi_w1_wait_irq_interruptible_timeout(struct amd_axi_w1_local *amd_axi_w1_local,
+						     u32 IRQ)
+{
+	int ret;
+
+	/* Enable the IRQ requested and wait for flag to indicate it's been triggered */
+	iowrite32(IRQ, amd_axi_w1_local->base_addr + AXIW1_IRQE_REG);
+	ret = wait_event_interruptible_timeout(amd_axi_w1_local->wait_queue,
+					       atomic_read(&amd_axi_w1_local->flag) != 0,
+					       AXIW1_TIMEOUT);
+	if (ret < 0) {
+		dev_err(amd_axi_w1_local->dev, "Wait IRQ Interrupted\n");
+		return -EINTR;
+	}
+
+	if (!ret) {
+		dev_err(amd_axi_w1_local->dev, "Wait IRQ Timeout\n");
+		return -EBUSY;
+	}
+
+	atomic_set(&amd_axi_w1_local->flag, 0);
+	return 0;
+}
+
+/**
+ * amd_axi_w1_touch_bit() - Performs the touch-bit function - write a 0 or 1 and reads the level.
+ *
+ * @data:	Pointer to device structure
+ * @bit:	The level to write
+ *
+ * Return:	The level read
+ */
+static u8 amd_axi_w1_touch_bit(void *data, u8 bit)
+{
+	struct amd_axi_w1_local *amd_axi_w1_local = data;
+	u8 val = 0;
+	int rc;
+
+	/* Wait for READY signal to be 1 to ensure 1-wire IP is ready */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_READY) == 0) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local,
+							       AXIW1_READY_IRQ_EN);
+		if (rc < 0)
+			return 1; /* Callee doesn't test for error. Return inactive bus state */
+	}
+
+	if (bit)
+		/* Read. Write read Bit command in register 0 */
+		iowrite32(AXIW1_READBIT, amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+	else
+		/* Write. Write tx Bit command in instruction register with bit to transmit */
+		iowrite32(AXIW1_WRITEBIT + (bit & 0x01),
+			  amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+
+	/* Write Go signal and clear control reset signal in control register */
+	iowrite32(AXIW1_GO, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	/* Wait for done signal to be 1 */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_DONE) != 1) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local, AXIW1_DONE_IRQ_EN);
+		if (rc < 0)
+			return 1; /* Callee doesn't test for error. Return inactive bus state */
+	}
+
+	/* If read, Retrieve data from register */
+	if (bit)
+		val = (u8)(ioread32(amd_axi_w1_local->base_addr + AXIW1_DATA_REG) & AXIW1_READDATA);
+
+	/* Clear Go signal in register 1 */
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	return val;
+}
+
+/**
+ * amd_axi_w1_read_byte - Performs the read byte function.
+ *
+ * @data:	Pointer to device structure
+ * Return:	The value read
+ */
+static u8 amd_axi_w1_read_byte(void *data)
+{
+	struct amd_axi_w1_local *amd_axi_w1_local = data;
+	u8 val = 0;
+	int rc;
+
+	/* Wait for READY signal to be 1 to ensure 1-wire IP is ready */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_READY) == 0) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local,
+							       AXIW1_READY_IRQ_EN);
+		if (rc < 0)
+			return 0xFF; /* Return inactive bus state */
+	}
+
+	/* Write read Byte command in instruction register*/
+	iowrite32(AXIW1_READBYTE, amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+
+	/* Write Go signal and clear control reset signal in control register */
+	iowrite32(AXIW1_GO, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	/* Wait for done signal to be 1 */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_DONE) != 1) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local, AXIW1_DONE_IRQ_EN);
+		if (rc < 0)
+			return 0xFF; /* Return inactive bus state */
+	}
+
+	/* Retrieve LSB bit in data register to get RX byte */
+	val = (u8)(ioread32(amd_axi_w1_local->base_addr + AXIW1_DATA_REG) & 0x000000FF);
+
+	/* Clear Go signal in control register */
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	return val;
+}
+
+/**
+ * amd_axi_w1_write_byte - Performs the write byte function.
+ *
+ * @data:	The ds2482 channel pointer
+ * @val:	The value to write
+ */
+static void amd_axi_w1_write_byte(void *data, u8 val)
+{
+	struct amd_axi_w1_local *amd_axi_w1_local = data;
+	int rc;
+
+	/* Wait for READY signal to be 1 to ensure 1-wire IP is ready */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_READY) == 0) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local,
+							       AXIW1_READY_IRQ_EN);
+		if (rc < 0)
+			return;
+	}
+
+	/* Write tx Byte command in instruction register with bit to transmit */
+	iowrite32(AXIW1_WRITEBYTE + val, amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+
+	/* Write Go signal and clear control reset signal in register 1 */
+	iowrite32(AXIW1_GO, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	/* Wait for done signal to be 1 */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_DONE) != 1) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local,
+							       AXIW1_DONE_IRQ_EN);
+		if (rc < 0)
+			return;
+	}
+
+	/* Clear Go signal in control register */
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+}
+
+/**
+ * amd_axi_w1_reset_bus() - Issues a reset bus sequence.
+ *
+ * @data:	the bus host data struct
+ * Return:	0=Device present, 1=No device present or error
+ */
+static u8 amd_axi_w1_reset_bus(void *data)
+{
+	struct amd_axi_w1_local *amd_axi_w1_local = data;
+	u8 val = 0;
+	int rc;
+
+	/* Reset 1-wire Axi IP */
+	iowrite32(AXI_RESET, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	/* Wait for READY signal to be 1 to ensure 1-wire IP is ready */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_READY) == 0) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local,
+							       AXIW1_READY_IRQ_EN);
+		if (rc < 0)
+			return 1; /* Something went wrong with the hardware */
+	}
+	/* Write Initialization command in instruction register */
+	iowrite32(AXIW1_INITPRES, amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+
+	/* Write Go signal and clear control reset signal in register 1 */
+	iowrite32(AXIW1_GO, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	/* Wait for done signal to be 1 */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_DONE) != 1) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local, AXIW1_DONE_IRQ_EN);
+		if (rc < 0)
+			return 1; /* Something went wrong with the hardware */
+	}
+	/* Retrieve MSB bit in status register to get failure bit */
+	if ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_PRESENCE) != 0)
+		val = 1;
+
+	/* Clear Go signal in control register */
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	return val;
+}
+
+/* Reset the 1-wire AXI IP. Put the IP in reset state and clear registers */
+static void amd_axi_w1_reset(struct amd_axi_w1_local *amd_axi_w1_local)
+{
+	iowrite32(AXI_RESET, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_IRQE_REG);
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_STAT_REG);
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_DATA_REG);
+}
+
+static irqreturn_t amd_axi_w1_irq(int irq, void *lp)
+{
+	struct amd_axi_w1_local *amd_axi_w1_local = lp;
+
+	/* Reset interrupt trigger */
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_IRQE_REG);
+
+	atomic_set(&amd_axi_w1_local->flag, 1);
+	wake_up_interruptible(&amd_axi_w1_local->wait_queue);
+
+	return IRQ_HANDLED;
+}
+
+static int amd_axi_w1_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct amd_axi_w1_local *lp;
+	struct clk *clk;
+	u32 ver_major, ver_minor;
+	int val, rc = 0;
+
+	lp = devm_kzalloc(dev, sizeof(*lp), GFP_KERNEL);
+	if (!lp)
+		return -ENOMEM;
+
+	lp->dev = dev;
+	lp->base_addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(lp->base_addr))
+		return PTR_ERR(lp->base_addr);
+
+	lp->irq = platform_get_irq(pdev, 0);
+	if (lp->irq < 0)
+		return lp->irq;
+
+	rc = devm_request_irq(dev, lp->irq, &amd_axi_w1_irq, IRQF_TRIGGER_HIGH, DRIVER_NAME, lp);
+	if (rc)
+		return rc;
+
+	/* Initialize wait queue and flag */
+	init_waitqueue_head(&lp->wait_queue);
+
+	clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	/* Verify IP presence in HW */
+	if (ioread32(lp->base_addr + AXIW1_IPID_REG) != AXIW1_IPID) {
+		dev_err(dev, "AMD 1-wire IP not detected in hardware\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Allow for future driver expansion supporting new hardware features
+	 * This driver currently only supports hardware 1.x, but include logic
+	 * to detect if a potentially incompatible future version is used
+	 * by reading major version ID. It is highly undesirable for new IP versions
+	 * to break the API, but this code will at least allow for graceful failure
+	 * should that happen. Future new features can be enabled by hardware
+	 * incrementing the minor version and augmenting the driver to detect capability
+	 * using the minor version number
+	 */
+	val = ioread32(lp->base_addr + AXIW1_IPVER_REG);
+	ver_major = FIELD_GET(AXIW1_MAJORVER_MASK, val);
+	ver_minor = FIELD_GET(AXIW1_MINORVER_MASK, val);
+
+	if (ver_major != 1) {
+		dev_err(dev, "AMD AXI W1 host version %u.%u is not supported by this driver",
+			ver_major, ver_minor);
+		return -ENODEV;
+	}
+
+	lp->bus_host.data = lp;
+	lp->bus_host.touch_bit = amd_axi_w1_touch_bit;
+	lp->bus_host.read_byte = amd_axi_w1_read_byte;
+	lp->bus_host.write_byte = amd_axi_w1_write_byte;
+	lp->bus_host.reset_bus = amd_axi_w1_reset_bus;
+
+	amd_axi_w1_reset(lp);
+
+	platform_set_drvdata(pdev, lp);
+	rc = w1_add_master_device(&lp->bus_host);
+	if (rc) {
+		dev_err(dev, "Could not add host device\n");
+		return rc;
+	}
+
+	return 0;
+}
+
+static void amd_axi_w1_remove(struct platform_device *pdev)
+{
+	struct amd_axi_w1_local *lp = platform_get_drvdata(pdev);
+
+	w1_remove_master_device(&lp->bus_host);
+}
+
+static const struct of_device_id amd_axi_w1_of_match[] = {
+	{ .compatible = "amd,axi-1wire-host" },
+	{ /* end of list */ },
+};
+MODULE_DEVICE_TABLE(of, amd_axi_w1_of_match);
+
+static struct platform_driver amd_axi_w1_driver = {
+	.probe = amd_axi_w1_probe,
+	.remove_new = amd_axi_w1_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = amd_axi_w1_of_match,
+	},
+};
+module_platform_driver(amd_axi_w1_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kris Chaplin <kris.chaplin@amd.com>");
+MODULE_DESCRIPTION("Driver for AMD AXI 1 Wire IP core");
-- 
2.42.GIT