The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy()
function. The PHY in this case is the Serdes. It is possible that the
PCI instance is configured for 2 lane operation across two different
Serdes instances, using 1 lane of each Serdes. In such a configuration,
if the reference clock for one Serdes is provided by the other Serdes,
it results in a race condition. After the Serdes providing the reference
clock is initialized by the PCI driver by invoking its PHY APIs, it is
not guaranteed that this Serdes remains powered on long enough for the
PHY APIs based initialization of the dependent Serdes. In such cases,
the PLL of the dependent Serdes fails to lock due to the absence of the
reference clock from the former Serdes which has been powered off by the
PM Core.

Fix this by obtaining reference to the PHYs before invoking the PHY
initialization APIs and releasing reference after the initialization is
complete.

Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 49aea6ce3e87..526b68100a4a 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -1218,12 +1218,20 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 		goto err_link;
 	}
 
+	/* Obtain reference(s) to the phy(s) */
+	for (i = 0; i < num_lanes; i++)
+		phy_pm_runtime_get_sync(ks_pcie->phy[i]);
+
 	ret = ks_pcie_enable_phy(ks_pcie);
 	if (ret) {
 		dev_err(dev, "failed to enable phy\n");
 		goto err_link;
 	}
 
+	/* Release reference(s) to the phy(s) */
+	for (i = 0; i < num_lanes; i++)
+		phy_pm_runtime_put_sync(ks_pcie->phy[i]);
+
 	platform_set_drvdata(pdev, ks_pcie);
 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
-- 
2.34.1

Kindly ignore this patch. The reference to the phy(s) need to be released in the
error path as well which I have missed in this patch. I will address that and
post the v2 patch.

On 26/09/23 11:12, Siddharth Vadapalli wrote:
> The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy()
> function. The PHY in this case is the Serdes. It is possible that the
> PCI instance is configured for 2 lane operation across two different
> Serdes instances, using 1 lane of each Serdes. In such a configuration,
> if the reference clock for one Serdes is provided by the other Serdes,
> it results in a race condition. After the Serdes providing the reference
> clock is initialized by the PCI driver by invoking its PHY APIs, it is
> not guaranteed that this Serdes remains powered on long enough for the
> PHY APIs based initialization of the dependent Serdes. In such cases,
> the PLL of the dependent Serdes fails to lock due to the absence of the
> reference clock from the former Serdes which has been powered off by the
> PM Core.
> 
> Fix this by obtaining reference to the PHYs before invoking the PHY
> initialization APIs and releasing reference after the initialization is
> complete.
> 
> Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling")
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
>  drivers/pci/controller/dwc/pci-keystone.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
> index 49aea6ce3e87..526b68100a4a 100644
> --- a/drivers/pci/controller/dwc/pci-keystone.c
> +++ b/drivers/pci/controller/dwc/pci-keystone.c
> @@ -1218,12 +1218,20 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
>  		goto err_link;
>  	}
>  
> +	/* Obtain reference(s) to the phy(s) */
> +	for (i = 0; i < num_lanes; i++)
> +		phy_pm_runtime_get_sync(ks_pcie->phy[i]);
> +
>  	ret = ks_pcie_enable_phy(ks_pcie);
>  	if (ret) {
>  		dev_err(dev, "failed to enable phy\n");
>  		goto err_link;
>  	}
>  
> +	/* Release reference(s) to the phy(s) */
> +	for (i = 0; i < num_lanes; i++)
> +		phy_pm_runtime_put_sync(ks_pcie->phy[i]);
> +
>  	platform_set_drvdata(pdev, ks_pcie);
>  	pm_runtime_enable(dev);
>  	ret = pm_runtime_get_sync(dev);

-- 
Regards,
Siddharth.