All X-Powers PMICs described by this binding have an IRQ pin, and so
far (almost) all boards connected this to some NMI pin or GPIO on the SoC
they are connected to.
However we start to see boards that omit this connection, and technically
the IRQ pin is not essential to the basic PMIC operation.

The existing Linux driver allows skipping the IRQ pin setup for two chips
already, so update the binding to also make the DT property optional for
the missing chip. And while we are at it, add the AXP313a to that list,
as they are actually boards out there not connecting the IRQ pin.

This allows to have DTs correctly describing those boards not wiring up
the interrupt.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
 Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
index 9ad55746133b5..06f1779835a1e 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -67,7 +67,10 @@ allOf:
         properties:
           compatible:
             contains:
-              const: x-powers,axp305
+              enum:
+                - x-powers,axp15060
+                - x-powers,axp305
+                - x-powers,axp313a
 
     then:
       required:
-- 
2.25.1

Dne torek, 19. september 2023 ob 12:39:12 CEST je Andre Przywara napisal(a):
> All X-Powers PMICs described by this binding have an IRQ pin, and so
> far (almost) all boards connected this to some NMI pin or GPIO on the SoC
> they are connected to.
> However we start to see boards that omit this connection, and technically
> the IRQ pin is not essential to the basic PMIC operation.
> 
> The existing Linux driver allows skipping the IRQ pin setup for two chips
> already, so update the binding to also make the DT property optional for
> the missing chip. And while we are at it, add the AXP313a to that list,
> as they are actually boards out there not connecting the IRQ pin.
> 
> This allows to have DTs correctly describing those boards not wiring up
> the interrupt.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>

Should I pick this patch through sunxi tree?

Best regards,
Jernej

> ---
>  Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
> index 9ad55746133b5..06f1779835a1e 100644
> --- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
> +++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
> @@ -67,7 +67,10 @@ allOf:
>          properties:
>            compatible:
>              contains:
> -              const: x-powers,axp305
> +              enum:
> +                - x-powers,axp15060
> +                - x-powers,axp305
> +                - x-powers,axp313a
>  
>      then:
>        required:
>

On Sun, 24 Sep 2023, Jernej Škrabec wrote:

> Dne torek, 19. september 2023 ob 12:39:12 CEST je Andre Przywara napisal(a):
> > All X-Powers PMICs described by this binding have an IRQ pin, and so
> > far (almost) all boards connected this to some NMI pin or GPIO on the SoC
> > they are connected to.
> > However we start to see boards that omit this connection, and technically
> > the IRQ pin is not essential to the basic PMIC operation.
> > 
> > The existing Linux driver allows skipping the IRQ pin setup for two chips
> > already, so update the binding to also make the DT property optional for
> > the missing chip. And while we are at it, add the AXP313a to that list,
> > as they are actually boards out there not connecting the IRQ pin.
> > 
> > This allows to have DTs correctly describing those boards not wiring up
> > the interrupt.
> > 
> > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> 
> Should I pick this patch through sunxi tree?

No thank you.

-- 
Lee Jones [李琼斯]

On Tue, 19 Sep 2023 11:39:12 +0100, Andre Przywara wrote:
> All X-Powers PMICs described by this binding have an IRQ pin, and so
> far (almost) all boards connected this to some NMI pin or GPIO on the SoC
> they are connected to.
> However we start to see boards that omit this connection, and technically
> the IRQ pin is not essential to the basic PMIC operation.
> 
> The existing Linux driver allows skipping the IRQ pin setup for two chips
> already, so update the binding to also make the DT property optional for
> the missing chip. And while we are at it, add the AXP313a to that list,
> as they are actually boards out there not connecting the IRQ pin.
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: mfd: x-powers,axp152: make interrupt optional for more chips
      commit: cf71329eb3a37f90c8ddec0651dc7b3fa76036c1

--
Lee Jones [李琼斯]