Currently did varaible is used for HW differences between the devices which
complicates the code by adding checks.
Therefore it is better to convert enum->pointer for data match and extend
match support for both ID and OF tables by using i2c_get_match_data().
Add struct rt1711h_chip_info with did variable and replace did->info in
struct rt1711h_chip. Later patch will add more hw differences to
struct rt1711h_chip_info and avoid checking did for HW differences.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2->v3:
* Added Rb tag from Andy.
v1->v2:
* Updated commit description.
---
drivers/usb/typec/tcpm/tcpci_rt1711h.c | 30 ++++++++++++++++++--------
1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
index 6146bca8e55f..2b7258d3cb4e 100644
--- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
+++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
@@ -51,13 +51,17 @@
/* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */
#define BMCIO_RXDZEN BIT(0)
+struct rt1711h_chip_info {
+ u16 did;
+};
+
struct rt1711h_chip {
struct tcpci_data data;
struct tcpci *tcpci;
struct device *dev;
struct regulator *vbus;
+ const struct rt1711h_chip_info *info;
bool src_en;
- u16 did;
};
static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -105,7 +109,7 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
return ret;
/* Enable PD30 extended message for RT1715 */
- if (chip->did == RT1715_DID) {
+ if (chip->info->did == RT1715_DID) {
ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
if (ret < 0)
@@ -200,7 +204,7 @@ static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
(cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
rxdz_en = BMCIO_RXDZEN;
- if (chip->did == RT1715_DID)
+ if (chip->info->did == RT1715_DID)
rxdz_sel = RT1711H_BMCIO_RXDZSEL;
else
rxdz_sel = 0;
@@ -319,7 +323,7 @@ static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *c
ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
if (ret < 0)
return ret;
- if (ret != chip->did) {
+ if (ret != chip->info->did) {
dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
return -ENODEV;
}
@@ -336,7 +340,7 @@ static int rt1711h_probe(struct i2c_client *client)
if (!chip)
return -ENOMEM;
- chip->did = (size_t)device_get_match_data(&client->dev);
+ chip->info = i2c_get_match_data(client);
ret = rt1711h_check_revision(client, chip);
if (ret < 0) {
@@ -391,17 +395,25 @@ static void rt1711h_remove(struct i2c_client *client)
tcpci_unregister_port(chip->tcpci);
}
+static const struct rt1711h_chip_info rt1711h = {
+ .did = RT1711H_DID,
+};
+
+static const struct rt1711h_chip_info rt1715 = {
+ .did = RT1715_DID,
+};
+
static const struct i2c_device_id rt1711h_id[] = {
- { "rt1711h", 0 },
- { "rt1715", 0 },
+ { "rt1711h", (kernel_ulong_t)&rt1711h },
+ { "rt1715", (kernel_ulong_t)&rt1715 },
{}
};
MODULE_DEVICE_TABLE(i2c, rt1711h_id);
#ifdef CONFIG_OF
static const struct of_device_id rt1711h_of_match[] = {
- { .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
- { .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
+ { .compatible = "richtek,rt1711h", .data = &rt1711h },
+ { .compatible = "richtek,rt1715", .data = &rt1715 },
{}
};
MODULE_DEVICE_TABLE(of, rt1711h_of_match);
--
2.25.1
On Wed, Sep 06, 2023 at 09:06:16AM +0100, Biju Das wrote:
> Currently did varaible is used for HW differences between the devices which
> complicates the code by adding checks.
>
> Therefore it is better to convert enum->pointer for data match and extend
> match support for both ID and OF tables by using i2c_get_match_data().
>
> Add struct rt1711h_chip_info with did variable and replace did->info in
> struct rt1711h_chip. Later patch will add more hw differences to
> struct rt1711h_chip_info and avoid checking did for HW differences.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> v2->v3:
> * Added Rb tag from Andy.
> v1->v2:
> * Updated commit description.
> ---
> drivers/usb/typec/tcpm/tcpci_rt1711h.c | 30 ++++++++++++++++++--------
> 1 file changed, 21 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> index 6146bca8e55f..2b7258d3cb4e 100644
> --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> @@ -51,13 +51,17 @@
> /* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */
> #define BMCIO_RXDZEN BIT(0)
>
> +struct rt1711h_chip_info {
> + u16 did;
> +};
> +
> struct rt1711h_chip {
> struct tcpci_data data;
> struct tcpci *tcpci;
> struct device *dev;
> struct regulator *vbus;
> + const struct rt1711h_chip_info *info;
> bool src_en;
> - u16 did;
> };
>
> static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
> @@ -105,7 +109,7 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
> return ret;
>
> /* Enable PD30 extended message for RT1715 */
> - if (chip->did == RT1715_DID) {
> + if (chip->info->did == RT1715_DID) {
> ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
> RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
> if (ret < 0)
> @@ -200,7 +204,7 @@ static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
> if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
> (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
> rxdz_en = BMCIO_RXDZEN;
> - if (chip->did == RT1715_DID)
> + if (chip->info->did == RT1715_DID)
> rxdz_sel = RT1711H_BMCIO_RXDZSEL;
> else
> rxdz_sel = 0;
> @@ -319,7 +323,7 @@ static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *c
> ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
> if (ret < 0)
> return ret;
> - if (ret != chip->did) {
> + if (ret != chip->info->did) {
> dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
> return -ENODEV;
> }
> @@ -336,7 +340,7 @@ static int rt1711h_probe(struct i2c_client *client)
> if (!chip)
> return -ENOMEM;
>
> - chip->did = (size_t)device_get_match_data(&client->dev);
> + chip->info = i2c_get_match_data(client);
>
> ret = rt1711h_check_revision(client, chip);
> if (ret < 0) {
> @@ -391,17 +395,25 @@ static void rt1711h_remove(struct i2c_client *client)
> tcpci_unregister_port(chip->tcpci);
> }
>
> +static const struct rt1711h_chip_info rt1711h = {
> + .did = RT1711H_DID,
> +};
> +
> +static const struct rt1711h_chip_info rt1715 = {
> + .did = RT1715_DID,
> +};
> +
> static const struct i2c_device_id rt1711h_id[] = {
> - { "rt1711h", 0 },
> - { "rt1715", 0 },
> + { "rt1711h", (kernel_ulong_t)&rt1711h },
> + { "rt1715", (kernel_ulong_t)&rt1715 },
> {}
> };
> MODULE_DEVICE_TABLE(i2c, rt1711h_id);
>
> #ifdef CONFIG_OF
> static const struct of_device_id rt1711h_of_match[] = {
> - { .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
> - { .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
> + { .compatible = "richtek,rt1711h", .data = &rt1711h },
> + { .compatible = "richtek,rt1715", .data = &rt1715 },
> {}
> };
> MODULE_DEVICE_TABLE(of, rt1711h_of_match);
> --
> 2.25.1
--
heikki
© 2016 - 2025 Red Hat, Inc.