[v4] Enable IPQ5018 USB2 support

[PATCH V4 0/4] Enable IPQ5018 USB2 support

Posted by Nitheesh Sekar 2 years, 3 months ago

This patch series adds the relevant phy and controller
DT configurations for enabling USB2 host mode support
on IPQ5018.

Tested with a USB Mass storage device.

Depends on:
Link: https://lore.kernel.org/linux-arm-msm/20230831030503.17100-1-quic_nsekar@quicinc.com/

[V4]:
	Add C99 initializers.
	Write 0 register values.

[V3]:
	Incorporated review comments with respect to
	naming USB related device tree nodes,
	dropped the 0 dealy inits and added the static const
	type for m31_ipq5018_regs.
	Sorted nodes in	board specific device tree file.

[V2]:
	Incorporated review comments regarding splitting the
	series as per subsytem, device tree naming conventions
	and ordereing of the nodes.

Nitheesh Sekar (4):
  dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
  phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
  arm64: dts: qcom: ipq5018: Add USB related nodes
  arm64: dts: qcom: ipq5018: Enable USB

 .../bindings/phy/qcom,ipq5332-usb-hsphy.yaml  |  4 +-
 .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 12 +++++
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 54 +++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-m31.c           | 51 ++++++++++++++++++
 4 files changed, 120 insertions(+), 1 deletion(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: (subset) [PATCH V4 0/4] Enable IPQ5018 USB2 support

Posted by Bjorn Andersson 2 years, 2 months ago

On Mon, 04 Sep 2023 12:06:31 +0530, Nitheesh Sekar wrote:
> This patch series adds the relevant phy and controller
> DT configurations for enabling USB2 host mode support
> on IPQ5018.
> 
> Tested with a USB Mass storage device.
> 
> Depends on:
> Link: https://lore.kernel.org/linux-arm-msm/20230831030503.17100-1-quic_nsekar@quicinc.com/
> 
> [...]

Applied, thanks!

[3/4] arm64: dts: qcom: ipq5018: Add USB related nodes
      commit: e7166f2774aafefd29ff26ffbbb7f6d40ac8ea1c
[4/4] arm64: dts: qcom: ipq5018: Enable USB
      commit: 80a438775aa398751229bcaed15459f3acdb645f

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: (subset) [PATCH V4 0/4] Enable IPQ5018 USB2 support

Posted by Vinod Koul 2 years, 2 months ago

On Mon, 04 Sep 2023 12:06:31 +0530, Nitheesh Sekar wrote:
> This patch series adds the relevant phy and controller
> DT configurations for enabling USB2 host mode support
> on IPQ5018.
> 
> Tested with a USB Mass storage device.
> 
> Depends on:
> Link: https://lore.kernel.org/linux-arm-msm/20230831030503.17100-1-quic_nsekar@quicinc.com/
> 
> [...]

Applied, thanks!

[1/4] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
      commit: 76bf09e08667f21bc3d1a8857f542c1ee54d9667
[2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
      commit: 241da15bd783fd2ae3b2f16817d802102590aa0d

Best regards,
-- 
~Vinod