The MT8195 SCP core 1 watchdog timeout needs to be handled in the
SCP core 0 IRQ handler because the MT8195 SCP core 1 watchdog timeout
IRQ is wired on the same IRQ entry for core 0 watchdog timeout.
MT8195 SCP has a watchdog status register to identify the watchdog
timeout source when IRQ triggered.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
drivers/remoteproc/mtk_common.h | 5 +++++
drivers/remoteproc/mtk_scp.c | 25 ++++++++++++++++++++++++-
2 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/mtk_common.h b/drivers/remoteproc/mtk_common.h
index 3d6b53b9f374..6d7736a031f7 100644
--- a/drivers/remoteproc/mtk_common.h
+++ b/drivers/remoteproc/mtk_common.h
@@ -55,6 +55,10 @@
#define MT8192_CORE0_WDT_IRQ 0x10030
#define MT8192_CORE0_WDT_CFG 0x10034
+#define MT8195_SYS_STATUS 0x4004
+#define MT8195_CORE0_WDT BIT(16)
+#define MT8195_CORE1_WDT BIT(17)
+
#define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS GENMASK(7, 4)
#define MT8195_CPU1_SRAM_PD 0x1084
@@ -63,6 +67,7 @@
#define MT8195_CORE1_SW_RSTN_CLR 0x20000
#define MT8195_CORE1_SW_RSTN_SET 0x20004
#define MT8195_CORE1_MEM_ATT_PREDEF 0x20008
+#define MT8195_CORE1_WDT_IRQ 0x20030
#define MT8195_CORE1_WDT_CFG 0x20034
#define MT8195_SEC_CTRL 0x85000
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index db5b15f5f8c1..49b2ca2b30b3 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -222,6 +222,29 @@ static void mt8192_scp_irq_handler(struct mtk_scp *scp)
}
}
+static void mt8195_scp_irq_handler(struct mtk_scp *scp)
+{
+ u32 scp_to_host;
+
+ scp_to_host = readl(scp->cluster->reg_base + MT8192_SCP2APMCU_IPC_SET);
+
+ if (scp_to_host & MT8192_SCP_IPC_INT_BIT) {
+ scp_ipi_handler(scp);
+ } else {
+ u32 reason = readl(scp->cluster->reg_base + MT8195_SYS_STATUS);
+
+ if (reason & MT8195_CORE0_WDT)
+ writel(1, scp->cluster->reg_base + MT8192_CORE0_WDT_IRQ);
+
+ if (reason & MT8195_CORE1_WDT)
+ writel(1, scp->cluster->reg_base + MT8195_CORE1_WDT_IRQ);
+
+ scp_wdt_handler(scp, reason);
+ }
+
+ writel(scp_to_host, scp->cluster->reg_base + MT8192_SCP2APMCU_IPC_CLR);
+}
+
static void mt8195_scp_c1_irq_handler(struct mtk_scp *scp)
{
u32 scp_to_host;
@@ -1255,7 +1278,7 @@ static const struct mtk_scp_of_data mt8192_of_data = {
static const struct mtk_scp_of_data mt8195_of_data = {
.scp_clk_get = mt8195_scp_clk_get,
.scp_before_load = mt8195_scp_before_load,
- .scp_irq_handler = mt8192_scp_irq_handler,
+ .scp_irq_handler = mt8195_scp_irq_handler,
.scp_reset_assert = mt8192_scp_reset_assert,
.scp_reset_deassert = mt8192_scp_reset_deassert,
.scp_stop = mt8195_scp_stop,
--
2.18.0