On Thu, 24 Aug 2023, Andi Shyti wrote:
> On Thu, Aug 24, 2023 at 04:28:25PM +0300, Ilpo Järvinen wrote:
> > Instead of if conditions with line splits, use the usual error handling
> > pattern with a separate variable to improve readability.
> >
> > No functional changes intended.
> >
> > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> > ---
> > drivers/i2c/busses/i2c-ali15x3.c | 10 +++++-----
> > 1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
> > index cc58feacd082..6fedecef9df3 100644
> > --- a/drivers/i2c/busses/i2c-ali15x3.c
> > +++ b/drivers/i2c/busses/i2c-ali15x3.c
> > @@ -122,6 +122,7 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
> > {
> > u16 a;
> > unsigned char temp;
> > + int ret;
>
> can you please add this ret declaration inside the
> "if (force_addr)"?
Sure.
Thanks for taking a look.
--
i.
> > /* Check the following things:
> > - SMB I/O address is initialized
> > @@ -167,12 +168,11 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
> > if(force_addr) {
> > dev_info(&ALI15X3_dev->dev, "forcing ISA address 0x%04X\n",
> > ali15x3_smba);
> > - if (PCIBIOS_SUCCESSFUL != pci_write_config_word(ALI15X3_dev,
> > - SMBBA,
> > - ali15x3_smba))
> > + ret = pci_write_config_word(ALI15X3_dev, SMBBA, ali15x3_smba);
> > + if (ret != PCIBIOS_SUCCESSFUL)
> > goto error;
> > - if (PCIBIOS_SUCCESSFUL != pci_read_config_word(ALI15X3_dev,
> > - SMBBA, &a))
> > + ret = pci_read_config_word(ALI15X3_dev, SMBBA, &a);
> > + if (ret != PCIBIOS_SUCCESSFUL)
> > goto error;
> > if ((a & ~(ALI15X3_SMB_IOSIZE - 1)) != ali15x3_smba) {
> > /* make sure it works */