GPIO bitbanged Wiegand controller requires definitions of GPIO lines to be
used on top of the common Wiegand properties. Wiegand utilizes two such
lines - DATA0(low data line) and DATA1(high data line).

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Martin Zaťovič <m.zatovic1@gmail.com>
---
 .../bindings/wiegand/wiegand-gpio.yaml        | 46 +++++++++++++++++++
 MAINTAINERS                                   |  5 ++
 2 files changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml

diff --git a/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml b/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
new file mode 100644
index 000000000000..cf2cb938de02
--- /dev/null
+++ b/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/wiegand/wiegand-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO bitbanged Wiegand interface properties
+
+maintainers:
+  - Martin Zaťovič <m.zatovic1@gmail.com>
+
+description:
+  This represents the GPIO lines used for bit-banged Wiegand on dedicated GPIO
+  lines.
+
+allOf:
+  - $ref: /schemas/wiegand/wiegand-controller.yaml#
+
+properties:
+  compatible:
+    const: wiegand-gpio
+
+  data-gpios:
+    description: GPIOs used as Wiegand data lines, DATA0 and DATA1 respectivelly.
+    maxItems: 2
+
+required:
+  - compatible
+  - data-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    wiegand@f00 {
+        compatible = "wiegand-gpio";
+        pulse-len-us = <50>;
+        interval-len-us = <2000>;
+        frame-gap-us = <2000>;
+        data-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>,
+                     <&gpio2 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+        /* devices */
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0afcc88a38d2..fb158e74ca4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22929,6 +22929,11 @@ F:	Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml
 F:	drivers/wiegand/wiegand.c
 F:	include/linux/wiegand.h
 
+WIEGAND GPIO BITBANG DRIVER
+M:	Martin Zaťovič <m.zatovic1@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
+
 WILOCITY WIL6210 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
-- 
2.40.1

On Thu, Aug 24, 2023 at 01:10:14PM +0200, Martin Zaťovič wrote:
> GPIO bitbanged Wiegand controller requires definitions of GPIO lines to be
> used on top of the common Wiegand properties. Wiegand utilizes two such
> lines - DATA0(low data line) and DATA1(high data line).
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Martin Zaťovič <m.zatovic1@gmail.com>
> ---
>  .../bindings/wiegand/wiegand-gpio.yaml        | 46 +++++++++++++++++++
>  MAINTAINERS                                   |  5 ++
>  2 files changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml b/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
> new file mode 100644
> index 000000000000..cf2cb938de02
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/wiegand/wiegand-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: GPIO bitbanged Wiegand interface properties
> +
> +maintainers:
> +  - Martin Zaťovič <m.zatovic1@gmail.com>
> +
> +description:
> +  This represents the GPIO lines used for bit-banged Wiegand on dedicated GPIO
> +  lines.
> +
> +allOf:
> +  - $ref: /schemas/wiegand/wiegand-controller.yaml#
> +
> +properties:
> +  compatible:
> +    const: wiegand-gpio
> +
> +  data-gpios:
> +    description: GPIOs used as Wiegand data lines, DATA0 and DATA1 respectivelly.
> +    maxItems: 2
> +
> +required:
> +  - compatible
> +  - data-gpios
> +
> +unevaluatedProperties: false

You'll find this fails if you add an actual child node. Assuming you go 
with only 1 child node allowed, then you need:

unevaluatedProperties:
  type: object

(There's not any way to say only 1 child, but multiple would have 
constraints in the common binding as I explained.)

Rob

On Thu, 24 Aug 2023 13:10:14 +0200, Martin Zaťovič wrote:
> GPIO bitbanged Wiegand controller requires definitions of GPIO lines to be
> used on top of the common Wiegand properties. Wiegand utilizes two such
> lines - DATA0(low data line) and DATA1(high data line).
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Martin Zaťovič <m.zatovic1@gmail.com>
> ---
>  .../bindings/wiegand/wiegand-gpio.yaml        | 46 +++++++++++++++++++
>  MAINTAINERS                                   |  5 ++
>  2 files changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/wiegand/wiegand-gpio.example.dts:20.21-29.11: Warning (unit_address_vs_reg): /example-0/wiegand@f00: node has a unit name, but no reg or ranges property

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230824111015.57765-4-m.zatovic1@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.