To have WLAN working properly, enable a 32K clock of the TWL6032.
In earlier tests, it was still enabled from a previous boot into
the vendor system.

Andreas Kemnade (3):
  dt-bindings: clock: add TWL6032 32K clocks
  clk: twl: add clock driver for TWL6032
  ARM: dts: omap4-embt2ws: enable 32K clock on WLAN

 .../bindings/clock/ti,twl6032-clk.yaml        |  38 ++++
 .../boot/dts/ti/omap/omap4-epson-embt2ws.dts  |  12 +
 drivers/clk/Kconfig                           |   9 +
 drivers/clk/Makefile                          |   1 +
 drivers/clk/clk-twl.c                         | 205 ++++++++++++++++++
 5 files changed, 265 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/ti,twl6032-clk.yaml
 create mode 100644 drivers/clk/clk-twl.c

-- 
2.39.2