On Sat, Aug 12, 2023 at 06:14:05AM +1000, John Watts wrote:
> The R329 variant of the sun4i I2S controller supports multiple
> data input pins (din pins) for receiving data. Each channel can have
> its data input pin configured.
>
> Allow this to be configured using a new channel-dins property.
>
> Signed-off-by: John Watts <contact@jookia.org>
> ---
> .../sound/allwinner,sun4i-a10-i2s.yaml | 22 +++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
> index 739114fb6549..402549f9941c 100644
> --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
> +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
> @@ -52,6 +52,13 @@ properties:
> - const: apb
> - const: mod
>
> + channel-dins:
Needs a vendor prefix.
> + $ref: /schemas/types.yaml#/definitions/uint8-array
> + description:
> + This is a list of DIN pin numbers, each used for a receiving I2S
> + channel. Pins are mapped to channels based on array index.
> + Channel 0 is the first number, then channel 1, and so on.
Constraints on the values? 255 is valid pin number?
> +
> # Even though it only applies to subschemas under the conditionals,
> # not listing them here will trigger a warning because of the
> # additionalsProperties set to false.
> @@ -144,4 +151,19 @@ examples:
> dma-names = "rx", "tx";
> };
>
> + - |
> + i2s0_d1: i2s@2032000 {
Drop unused labels.
However, I don't really think adding 1 property justifies a whole other
example.
> + #sound-dai-cells = <0>;
> + compatible = "allwinner,sun20i-d1-i2s",
> + "allwinner,sun50i-r329-i2s";
> + reg = <0x2032000 0x1000>;
> + interrupts = <0 26 0>;
> + clocks = <&ccu 86>, <&ccu 82>;
> + clock-names = "apb", "mod";
> + resets = <&ccu 34>;
> + dmas = <&dma 3>, <&dma 3>;
> + dma-names = "rx", "tx";
> + channel-dins = /bits/ 8 <0 0 1 1 2 2>;
> + };
> +
> ...
> --
> 2.41.0
>