arch/riscv/boot/dts/starfive/jh7110.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
This patch fixes the StarFive JH7110 gmac TCP RX slow issue. And it has been
tested on VisionFive 2.
Here is the result of the test (iperf3):
Before:
# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.1.4, port 47604
[ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec
[ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec
[ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec
[ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec
[ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec
[ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec
[ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec
[ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec
[ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec
[ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver
After:
# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.1.4, port 47710
[ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec
[ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec
[ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec
[ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec
[ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec
[ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec
[ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec
[ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec
[ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec
[ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec
[ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver
For more information and support, you can visit RVspace wiki[1].
[1]: https://wiki.rvspace.org/
Samin Guo (1):
riscv: starfive: jh7110: Fix GMAC configuration
arch/riscv/boot/dts/starfive/jh7110.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--
2.17.1
From: Conor Dooley <conor.dooley@microchip.com>
On Thu, 10 Aug 2023 15:46:45 +0800, Samin Guo wrote:
> This patch fixes the StarFive JH7110 gmac TCP RX slow issue. And it has been
> tested on VisionFive 2.
>
> Here is the result of the test (iperf3):
>
> Before:
> # iperf3 -s
> -----------------------------------------------------------
> Server listening on 5201 (test #1)
> -----------------------------------------------------------
> Accepted connection from 192.168.1.4, port 47604
> [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612
> [ ID] Interval Transfer Bitrate
> [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec
> [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec
> [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec
> [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec
> [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec
> [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec
> [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec
> [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec
> [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec
> [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec
> - - - - - - - - - - - - - - - - - - - - - - - - -
> [ ID] Interval Transfer Bitrate
> [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver
>
> [...]
Applied to riscv-dt-for-next with the conversion to decimal, thanks!
[1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration
https://git.kernel.org/conor/c/1273f7e96a70
Thanks,
Conor.
On 2023/8/10 23:37:13, Conor Dooley wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > On Thu, 10 Aug 2023 15:46:45 +0800, Samin Guo wrote: >> This patch fixes the StarFive JH7110 gmac TCP RX slow issue. And it has been >> tested on VisionFive 2. >> >> Here is the result of the test (iperf3): >> >> Before: >> # iperf3 -s >> ----------------------------------------------------------- >> Server listening on 5201 (test #1) >> ----------------------------------------------------------- >> Accepted connection from 192.168.1.4, port 47604 >> [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec >> [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec >> [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec >> [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec >> [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec >> [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec >> [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec >> [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec >> [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec >> [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec >> - - - - - - - - - - - - - - - - - - - - - - - - - >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver >> >> [...] > > Applied to riscv-dt-for-next with the conversion to decimal, thanks! > > [1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration > https://git.kernel.org/conor/c/1273f7e96a70 > > Thanks, > Conor. Hi Conor， Thank a lot for for merging into the next branch so promptly！ Best regards, Samin
© 2016 - 2026 Red Hat, Inc.