Replace hard-coded interrupt parts (GIC, flags) with standard defines
for readability.  No changes in resulting DTBs.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8939.dtsi |  2 +-
 arch/arm64/boot/dts/qcom/sdm630.dtsi  | 16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index af6d644a5d38..6e24f0f2374f 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -1975,7 +1975,7 @@ wcnss_iris: iris {
 			};
 
 			smd-edge {
-				interrupts = <GIC_SPI 142 1>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
 				qcom,ipc = <&apcs1_mbox 8 17>;
 				qcom,smd-edge = <6>;
 				qcom,remote-pid = <4>;
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 25124acf705f..1b2c82a1db43 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -2290,50 +2290,50 @@ timer@17920000 {
 
 			frame@17921000 {
 				frame-number = <0>;
-				interrupts = <0 8 0x4>,
-						<0 7 0x4>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17921000 0x1000>,
 					<0x17922000 0x1000>;
 			};
 
 			frame@17923000 {
 				frame-number = <1>;
-				interrupts = <0 9 0x4>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17923000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17924000 {
 				frame-number = <2>;
-				interrupts = <0 10 0x4>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17924000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17925000 {
 				frame-number = <3>;
-				interrupts = <0 11 0x4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17925000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17926000 {
 				frame-number = <4>;
-				interrupts = <0 12 0x4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17926000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17927000 {
 				frame-number = <5>;
-				interrupts = <0 13 0x4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17927000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17928000 {
 				frame-number = <6>;
-				interrupts = <0 14 0x4>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17928000 0x1000>;
 				status = "disabled";
 			};
-- 
2.34.1

On 30.07.2023 13:20, Krzysztof Kozlowski wrote:
> Replace hard-coded interrupt parts (GIC, flags) with standard defines
> for readability.  No changes in resulting DTBs.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

On 30/07/2023 13:20, Krzysztof Kozlowski wrote:
> Replace hard-coded interrupt parts (GIC, flags) with standard defines
> for readability.  No changes in resulting DTBs.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8939.dtsi |  2 +-
>  arch/arm64/boot/dts/qcom/sdm630.dtsi  | 16 ++++++++--------
>  2 files changed, 9 insertions(+), 9 deletions(-)

This is incomplete. I found few more cases for arm64, so I will send a v2.

Best regards,
Krzysztof