This series adds support for:
- SERDES, WIZ DT nodes, Serdes lane control mux
- DSS and DisplayPort-0 nodes

This support DEPENDS upon another series which was introduced as part
of discussion in v5. That series[1] moves the ti-serdes headers file
from bindings to "arch/arm64/boot/dts/ti". (That series is merged in
linux-next tree)

Changelog v6->v7:
- change compatible for scm_conf to 'simple-bus'
- drop main_cpsw node due to driver dependency on [2]

Changelog v5->v6:
- Change header file according to [1].
- Add idle-state property in serdes_ln_ctrl node.
- Fix dtbs_check warning due to clock-frequency property in serdes_refclk
  node by disabling the node in main.dtsi and enabling it in board file
  when the clock-frequency node is actually added.

Changelog v4->v5:
- rebased the patches on linux-next tip.

Changelog v3->v4:
- add reg property to serdes_ln_ctrl and fix the node name again to
  get rid of dtbs_check error.
- reorder reg, reg-names and ranges property for main_cpsw1.
- correct the order for clocks in serdes_wiz nodes to fix dtbs_check
  warnings.
- fix indentation in reg, reg-names and clock property for dss node.
- add comments for the reg type in dss registers.

Changelog v3->v2:
- fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes
  (Checked all the changes of the series with W=12 option during build)
- added clock-frequency for serdes_refclk along with other EVM changes
  This refclk is being used by all the instances of serdes_wiz which
  are disabled by default. So configuring refclk when the serdes nodes
  are used for the first time is okay.

Changelog v1->v2:
- Moved J784S4 EVM changes together to the last patch
  (Suggested by Andrew)

v5 patch link:
<https://lore.kernel.org/all/20230721132029.123881-1-j-choudhary@ti.com/>

[1]: <https://lore.kernel.org/all/20230721125732.122421-1-j-choudhary@ti.com/>
[2]: <https://lore.kernel.org/all/20230605154153.24025-1-afd@ti.com/>

Rahul T R (2):
  arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
  arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0

Siddharth Vadapalli (2):
  arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane
    mux
  arm64: dts: ti: k3-j784s4: Add WIZ and SERDES PHY nodes

 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts   | 117 +++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 285 +++++++++++++++++++++
 2 files changed, 402 insertions(+)

-- 
2.25.1

On 10:38-20230728, Jayesh Choudhary wrote:
> This series adds support for:
> - SERDES, WIZ DT nodes, Serdes lane control mux
> - DSS and DisplayPort-0 nodes
> 
> This support DEPENDS upon another series which was introduced as part
> of discussion in v5. That series[1] moves the ti-serdes headers file
> from bindings to "arch/arm64/boot/dts/ti". (That series is merged in
> linux-next tree)
> 
> Changelog v6->v7:
> - change compatible for scm_conf to 'simple-bus'
> - drop main_cpsw node due to driver dependency on [2]
> 
> Changelog v5->v6:
> - Change header file according to [1].
> - Add idle-state property in serdes_ln_ctrl node.
> - Fix dtbs_check warning due to clock-frequency property in serdes_refclk
>   node by disabling the node in main.dtsi and enabling it in board file
>   when the clock-frequency node is actually added.
> 
> Changelog v4->v5:
> - rebased the patches on linux-next tip.
> 
> Changelog v3->v4:
> - add reg property to serdes_ln_ctrl and fix the node name again to
>   get rid of dtbs_check error.
> - reorder reg, reg-names and ranges property for main_cpsw1.
> - correct the order for clocks in serdes_wiz nodes to fix dtbs_check
>   warnings.
> - fix indentation in reg, reg-names and clock property for dss node.
> - add comments for the reg type in dss registers.
> 
> Changelog v3->v2:
> - fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes
>   (Checked all the changes of the series with W=12 option during build)
> - added clock-frequency for serdes_refclk along with other EVM changes
>   This refclk is being used by all the instances of serdes_wiz which
>   are disabled by default. So configuring refclk when the serdes nodes
>   are used for the first time is okay.
> 
> Changelog v1->v2:
> - Moved J784S4 EVM changes together to the last patch
>   (Suggested by Andrew)
> 
> v5 patch link:
> <https://lore.kernel.org/all/20230721132029.123881-1-j-choudhary@ti.com/>
> 
> [1]: <https://lore.kernel.org/all/20230721125732.122421-1-j-choudhary@ti.com/>
> [2]: <https://lore.kernel.org/all/20230605154153.24025-1-afd@ti.com/>
> 
> Rahul T R (2):
>   arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
>   arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0
> 

Could you enable AM69-SK as well? is there anything stopping it being part of the series?

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

Hello Nishanth,

On 29/07/23 02:42, Nishanth Menon wrote:
> On 10:38-20230728, Jayesh Choudhary wrote:
>> This series adds support for:
>> - SERDES, WIZ DT nodes, Serdes lane control mux
>> - DSS and DisplayPort-0 nodes
>>
>> This support DEPENDS upon another series which was introduced as part
>> of discussion in v5. That series[1] moves the ti-serdes headers file
>> from bindings to "arch/arm64/boot/dts/ti". (That series is merged in
>> linux-next tree)
>>
>> Changelog v6->v7:
>> - change compatible for scm_conf to 'simple-bus'
>> - drop main_cpsw node due to driver dependency on [2]
>>

[...]

>>
>> v5 patch link:
>> <https://lore.kernel.org/all/20230721132029.123881-1-j-choudhary@ti.com/>
>>
>> [1]: <https://lore.kernel.org/all/20230721125732.122421-1-j-choudhary@ti.com/>
>> [2]: <https://lore.kernel.org/all/20230605154153.24025-1-afd@ti.com/>
>>
>> Rahul T R (2):
>>    arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
>>    arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0
>>
> 
> Could you enable AM69-SK as well? is there anything stopping it being part of the series?
> 

Okay I will add support for AM69-SK too.

Thanks,
-Jayesh