If the tuning step is not set, the tuning step is set to 1.
For some sd cards, the following Tuning timeout will occur,
so set the default tuning step. This refers to the NXP vendor's
commit below:

https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/
arch/arm/boot/dts/imx7s.dtsi#L1216-L1217

Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>

v2:
  * Refer to https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/arch/arm/boot/dts/imx7s.dtsi#L1216-L1217
    and add the following attributes for all usdhc of imx7:
      fsl,tuning-step = <2>;
      fsl,tuning-start-tap = <20>;

---
 arch/arm/boot/dts/nxp/imx/imx7s.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index 54026c2c93fa..6ffb428dc939 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -1184,6 +1184,8 @@ usdhc1: mmc@30b40000 {
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1196,6 +1198,8 @@ usdhc2: mmc@30b50000 {
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1208,6 +1212,8 @@ usdhc3: mmc@30b60000 {
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
-- 
2.25.1

Hi Xiaolei,

On Sat, Jul 22, 2023 at 11:21 PM Xiaolei Wang
<xiaolei.wang@windriver.com> wrote:
>
> If the tuning step is not set, the tuning step is set to 1.
> For some sd cards, the following Tuning timeout will occur,

You missed putting the timeout message here.

> so set the default tuning step. This refers to the NXP vendor's
> commit below:
>
> https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/
> arch/arm/boot/dts/imx7s.dtsi#L1216-L1217
>
> Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting")
> Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
>
> v2:
>   * Refer to https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/arch/arm/boot/dts/imx7s.dtsi#L1216-L1217
>     and add the following attributes for all usdhc of imx7:
>       fsl,tuning-step = <2>;
>       fsl,tuning-start-tap = <20>;

This v2 changelog should be placed below the --- line.

> ---

Put it here.

Reviewed-by: Fabio Estevam <festevam@gmail.com>