Hardkernel Odroid-M1 board is supported since commit fd3583267703
("arm64: dts: rockchip: Add Hardkernel ODROID-M1 board"). Enable all
drivers needed by that board in the defconfig to let the automated
test systems to check them on the real hardware.

The drivers were configured to be compiled as modules if that was
supported.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
v3:
- rebased onto latest kernel release

v2:
https://lore.kernel.org/all/20221209101834.2030-1-m.szyprowski@samsung.com/
---
 arch/arm64/configs/defconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 6cbf6eb59378..1b219e5dc314 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -229,6 +229,7 @@ CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_HISI=y
 CONFIG_PCIE_QCOM=y
 CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCIE_ROCKCHIP_DW_HOST=y
 CONFIG_PCIE_KIRIN=y
 CONFIG_PCIE_HISI_STB=y
 CONFIG_PCIE_TEGRA194_HOST=m
@@ -297,6 +298,7 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_AHCI_BRCM=m
+CONFIG_AHCI_DWC=m
 CONFIG_AHCI_CEVA=y
 CONFIG_AHCI_MVEBU=y
 CONFIG_AHCI_XGENE=y
@@ -432,6 +434,7 @@ CONFIG_INPUT_PM8XXX_VIBRATOR=m
 CONFIG_INPUT_TPS65219_PWRBUTTON=m
 CONFIG_INPUT_PWM_BEEPER=m
 CONFIG_INPUT_PWM_VIBRA=m
+CONFIG_INPUT_RK805_PWRKEY=m
 CONFIG_INPUT_HISI_POWERKEY=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
@@ -533,6 +536,7 @@ CONFIG_SPI_OMAP24XX=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_ROCKCHIP=y
+CONFIG_SPI_ROCKCHIP_SFC=m
 CONFIG_SPI_RPCIF=m
 CONFIG_SPI_RSPI=m
 CONFIG_SPI_RZV2M_CSI=m
@@ -548,6 +552,7 @@ CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
 CONFIG_SPMI_MTK_PMIF=m
 CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_RK805=m
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_OWL=y
 CONFIG_PINCTRL_S700=y
@@ -631,6 +636,7 @@ CONFIG_BATTERY_MAX17042=m
 CONFIG_CHARGER_MT6360=m
 CONFIG_CHARGER_BQ25890=m
 CONFIG_CHARGER_BQ25980=m
+CONFIG_CHARGER_RK817=m
 CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_GPIO_FAN=m
@@ -741,6 +747,7 @@ CONFIG_REGULATOR_VCTRL=m
 CONFIG_RC_CORE=m
 CONFIG_RC_DECODERS=y
 CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=m
 CONFIG_IR_MESON=m
 CONFIG_IR_SUNXI=m
 CONFIG_MEDIA_SUPPORT=m
@@ -795,6 +802,7 @@ CONFIG_DRM_EXYNOS_DSI=y
 CONFIG_DRM_EXYNOS_HDMI=y
 CONFIG_DRM_EXYNOS_MIC=y
 CONFIG_DRM_ROCKCHIP=m
+CONFIG_ROCKCHIP_VOP2=y
 CONFIG_ROCKCHIP_ANALOGIX_DP=y
 CONFIG_ROCKCHIP_CDN_DP=y
 CONFIG_ROCKCHIP_DW_HDMI=y
@@ -926,6 +934,7 @@ CONFIG_SND_SOC_GTM601=m
 CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_PCM3168A_I2C=m
+CONFIG_SND_SOC_RK817=m
 CONFIG_SND_SOC_RT5640=m
 CONFIG_SND_SOC_RT5659=m
 CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
@@ -1399,6 +1408,7 @@ CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m
 CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=m
 CONFIG_PHY_ROCKCHIP_PCIE=m
+CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
 CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_PHY_SAMSUNG_UFS=y
 CONFIG_PHY_UNIPHIER_USB2=y
-- 
2.34.1

On Thu, 20 Jul 2023 10:08:38 +0200, Marek Szyprowski wrote:
> Hardkernel Odroid-M1 board is supported since commit fd3583267703
> ("arm64: dts: rockchip: Add Hardkernel ODROID-M1 board"). Enable all
> drivers needed by that board in the defconfig to let the automated
> test systems to check them on the real hardware.
> 
> The drivers were configured to be compiled as modules if that was
> supported.
> 
> [...]

Applied, thanks!

[1/1] arm64: defconfig: Enable drivers for the Odroid-M1 board
      commit: 5eaeb85ccae878e5800a207da7baeb5d9d1dd2fd

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>