Add the initial device tree support for the Reference Design
Platform(RDP) 415 based on IPQ5018 family of SoC. This patch
carries the support for Console UART and eMMC.

This series is based on the below series,
https://lore.kernel.org/lkml/20230720072938.315
46-1-quic_harihk@quicinc.com/

Hariharan K (2):
  dt-bindings: arm: qcom: Document MP03.3-C2 board based on IPQ5018
    family
  arm64: dts: qcom: ipq5018: add support for the RDP415 variant

 .../devicetree/bindings/arm/qcom.yaml         |  2 +
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 arch/arm64/boot/dts/qcom/ipq5018-rdp415.dts   | 49 +++++++++++++++++++
 3 files changed, 52 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-rdp415.dts

-- 
2.17.1

On 20.07.2023 09:48, Hariharan K wrote:
> Add the initial device tree support for the Reference Design
> Platform(RDP) 415 based on IPQ5018 family of SoC. This patch
> carries the support for Console UART and eMMC.
> 
> This series is based on the below series,
> https://lore.kernel.org/lkml/20230720072938.315
> 46-1-quic_harihk@quicinc.com/
> 
You just sent 3 series doing almost the same thing.
For v2, please bunch them all up into a single series.

Konrad

On 7/20/2023 1:35 PM, Konrad Dybcio wrote:
> On 20.07.2023 09:48, Hariharan K wrote:
>> Add the initial device tree support for the Reference Design
>> Platform(RDP) 415 based on IPQ5018 family of SoC. This patch
>> carries the support for Console UART and eMMC.
>>
>> This series is based on the below series,
>> https://lore.kernel.org/lkml/20230720072938.315
>> 46-1-quic_harihk@quicinc.com/
>>
> You just sent 3 series doing almost the same thing.
> For v2, please bunch them all up into a single series.
> 

Sure. Will rework and post in next series.

Best regards,
Hariharan K

> Konrad