This patch adds kernel inbox driver support for the serial port and
parallel port mode controller of ASIX AX99100 PCIe to Multi I/O
Controller. This device has 4 separate PCI functions and each functions
can be configured to operate in different modes.

This patchset is tested with ASIX AX99100 in following modes:
* 4 x Serial Port
* 2 x Serial Port
* 2 x Serial Port + 1 x Parallel Port
* 1 x Parallel Port

Jiaqing Zhao (4):
  can: ems_pci: remove PCI_SUBVENDOR_ID_ASIX definition
  can: ems_pci: move ASIX AX99100 ids to pci_ids.h
  serial: 8250_pci: add support for ASIX AX99100
  parport_pc: add support for ASIX AX99100

 drivers/net/can/sja1000/ems_pci.c  |  7 +------
 drivers/parport/parport_pc.c       |  5 +++++
 drivers/tty/serial/8250/8250_pci.c | 10 ++++++++++
 include/linux/pci_ids.h            |  4 ++++
 4 files changed, 20 insertions(+), 6 deletions(-)

-- 
2.39.2

On 18.07.2023 17:41:56, Jiaqing Zhao wrote:
> This patch adds kernel inbox driver support for the serial port and
> parallel port mode controller of ASIX AX99100 PCIe to Multi I/O
> Controller. This device has 4 separate PCI functions and each functions
> can be configured to operate in different modes.
> 
> This patchset is tested with ASIX AX99100 in following modes:
> * 4 x Serial Port
> * 2 x Serial Port
> * 2 x Serial Port + 1 x Parallel Port
> * 1 x Parallel Port

I think it's better to split the series into subsystems. For CAN that
would be patches 1 and 2. Please add support@ems-wuensche.com and
uttenthaler@ems-wuensche.com on Cc.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |