From: Xianwei Zhao <xianwei.zhao@amlogic.com>

Enable power domain controller for Amlogic C3 SoC

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index 60ad4f3eef9d..826c51b1aff6 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -47,6 +47,16 @@ xtal: xtal-clk {
 		#clock-cells = <0>;
 	};
 
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,c3-pwrc";
+			#power-domain-cells = <1>;
+			status = "okay";
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-- 
2.37.1

On 03/07/2023 11:31, =Xianwei Zhao wrote:
> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
> 
> Enable power domain controller for Amlogic C3 SoC
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> index 60ad4f3eef9d..826c51b1aff6 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> @@ -47,6 +47,16 @@ xtal: xtal-clk {
>  		#clock-cells = <0>;
>  	};
>  
> +	sm: secure-monitor {
> +		compatible = "amlogic,meson-gxbb-sm";
> +
> +		pwrc: power-controller {
> +			compatible = "amlogic,c3-pwrc";
> +			#power-domain-cells = <1>;
> +			status = "okay";

Why do you need it? okay is by default.

Best regards,
Krzysztof

Hi Krzysztof,
    Thanks for your reply.

On 2023/7/3 21:12, Krzysztof Kozlowski wrote:
> [ EXTERNAL EMAIL ]
> 
> On 03/07/2023 11:31, =Xianwei Zhao wrote:
>> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>
>> Enable power domain controller for Amlogic C3 SoC
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> ---
>>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 10 ++++++++++
>>   1 file changed, 10 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> index 60ad4f3eef9d..826c51b1aff6 100644
>> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> @@ -47,6 +47,16 @@ xtal: xtal-clk {
>>                #clock-cells = <0>;
>>        };
>>
>> +     sm: secure-monitor {
>> +             compatible = "amlogic,meson-gxbb-sm";
>> +
>> +             pwrc: power-controller {
>> +                     compatible = "amlogic,c3-pwrc";
>> +                     #power-domain-cells = <1>;
>> +                     status = "okay";
> 
> Why do you need it? okay is by default.Will move "status" in next version.
> 
> Best regards,
> Krzysztof
>