1. Patchew
  2. linux
  3. [PATCH v6 0/8] soc: mediatek: MT8365 power support
  4. View patch

[PATCH v6 3/8] soc: mediatek: pm-domains: Split bus_prot_mask

Markus Schneider-Pargmann posted 8 patches 1 year, 4 months ago
There is a newer version of this series
[PATCH v6 3/8] soc: mediatek: pm-domains: Split bus_prot_mask
Posted by Markus Schneider-Pargmann 1 year, 4 months ago 
bus_prot_mask is used for all operations, set clear and acknowledge. In
preparation of m8365 power domain support split this one mask into two,
one mask for set and clear, another one for acknowledge.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 drivers/soc/mediatek/mtk-pm-domains.c | 24 ++++++++++++++----------
 drivers/soc/mediatek/mtk-pm-domains.h | 14 ++++++++------
 2 files changed, 22 insertions(+), 16 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index aa9ab413479e..c801fa763e89 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -123,18 +123,20 @@ static int _scpsys_bus_protect_enable(const struct scpsys_bus_prot_data *bpd, st
 	int i, ret;
 
 	for (i = 0; i < SPM_MAX_BUS_PROT_DATA; i++) {
-		u32 val, mask = bpd[i].bus_prot_mask;
+		u32 val;
+		u32 set_clr_mask = bpd[i].bus_prot_set_clr_mask;
+		u32 sta_mask = bpd[i].bus_prot_sta_mask;
 
-		if (!mask)
+		if (!set_clr_mask)
 			break;
 
 		if (bpd[i].flags & BUS_PROT_REG_UPDATE)
-			regmap_set_bits(regmap, bpd[i].bus_prot_set, mask);
+			regmap_set_bits(regmap, bpd[i].bus_prot_set, set_clr_mask);
 		else
-			regmap_write(regmap, bpd[i].bus_prot_set, mask);
+			regmap_write(regmap, bpd[i].bus_prot_set, set_clr_mask);
 
 		ret = regmap_read_poll_timeout(regmap, bpd[i].bus_prot_sta,
-					       val, (val & mask) == mask,
+					       val, (val & sta_mask) == sta_mask,
 					       MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
 		if (ret)
 			return ret;
@@ -160,21 +162,23 @@ static int _scpsys_bus_protect_disable(const struct scpsys_bus_prot_data *bpd,
 	int i, ret;
 
 	for (i = SPM_MAX_BUS_PROT_DATA - 1; i >= 0; i--) {
-		u32 val, mask = bpd[i].bus_prot_mask;
+		u32 val;
+		u32 set_clr_mask = bpd[i].bus_prot_set_clr_mask;
+		u32 sta_mask = bpd[i].bus_prot_sta_mask;
 
-		if (!mask)
+		if (!set_clr_mask)
 			continue;
 
 		if (bpd[i].flags & BUS_PROT_REG_UPDATE)
-			regmap_clear_bits(regmap, bpd[i].bus_prot_clr, mask);
+			regmap_clear_bits(regmap, bpd[i].bus_prot_clr, set_clr_mask);
 		else
-			regmap_write(regmap, bpd[i].bus_prot_clr, mask);
+			regmap_write(regmap, bpd[i].bus_prot_clr, set_clr_mask);
 
 		if (bpd[i].flags & BUS_PROT_IGNORE_CLR_ACK)
 			continue;
 
 		ret = regmap_read_poll_timeout(regmap, bpd[i].bus_prot_sta,
-					       val, !(val & mask),
+					       val, !(val & sta_mask),
 					       MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
 		if (ret)
 			return ret;
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index d8c0c299dd45..4c3ab72a907b 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -47,22 +47,23 @@ enum scpsys_bus_prot_flags {
 	BUS_PROT_IGNORE_CLR_ACK = BIT(2),
 };
 
-#define _BUS_PROT(_mask, _set, _clr, _sta, _flags) {		\
-		.bus_prot_mask = (_mask),			\
+#define _BUS_PROT(_set_clr_mask, _set, _clr, _sta_mask, _sta, _flags) {	\
+		.bus_prot_set_clr_mask = (_set_clr_mask),	\
 		.bus_prot_set = _set,				\
 		.bus_prot_clr = _clr,				\
+		.bus_prot_sta_mask = (_sta_mask),		\
 		.bus_prot_sta = _sta,				\
 		.flags = _flags					\
 	}
 
 #define BUS_PROT_WR(_mask, _set, _clr, _sta)			\
-		_BUS_PROT(_mask, _set, _clr, _sta, 0)
+		_BUS_PROT(_mask, _set, _clr, _mask, _sta, 0)
 
 #define BUS_PROT_WR_IGN(_mask, _set, _clr, _sta)		\
-		_BUS_PROT(_mask, _set, _clr, _sta, BUS_PROT_IGNORE_CLR_ACK)
+		_BUS_PROT(_mask, _set, _clr, _mask, _sta, BUS_PROT_IGNORE_CLR_ACK)
 
 #define BUS_PROT_UPDATE(_mask, _set, _clr, _sta)		\
-		_BUS_PROT(_mask, _set, _clr, _sta, BUS_PROT_REG_UPDATE)
+		_BUS_PROT(_mask, _set, _clr, _mask, _sta, BUS_PROT_REG_UPDATE)
 
 #define BUS_PROT_UPDATE_TOPAXI(_mask)				\
 		BUS_PROT_UPDATE(_mask,				\
@@ -71,9 +72,10 @@ enum scpsys_bus_prot_flags {
 				INFRA_TOPAXI_PROTECTSTA1)
 
 struct scpsys_bus_prot_data {
-	u32 bus_prot_mask;
+	u32 bus_prot_set_clr_mask;
 	u32 bus_prot_set;
 	u32 bus_prot_clr;
+	u32 bus_prot_sta_mask;
 	u32 bus_prot_sta;
 	u8 flags;
 };
-- 
2.40.1
Re: [PATCH v6 3/8] soc: mediatek: pm-domains: Split bus_prot_mask
Posted by AngeloGioacchino Del Regno 1 year, 4 months ago 
Il 27/06/23 15:10, Markus Schneider-Pargmann ha scritto:
> bus_prot_mask is used for all operations, set clear and acknowledge. In
> preparation of m8365 power domain support split this one mask into two,
> one mask for set and clear, another one for acknowledge.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> ---
>   drivers/soc/mediatek/mtk-pm-domains.c | 24 ++++++++++++++----------
>   drivers/soc/mediatek/mtk-pm-domains.h | 14 ++++++++------
>   2 files changed, 22 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
> index aa9ab413479e..c801fa763e89 100644
> --- a/drivers/soc/mediatek/mtk-pm-domains.c
> +++ b/drivers/soc/mediatek/mtk-pm-domains.c
> @@ -123,18 +123,20 @@ static int _scpsys_bus_protect_enable(const struct scpsys_bus_prot_data *bpd, st
>   	int i, ret;
>   
>   	for (i = 0; i < SPM_MAX_BUS_PROT_DATA; i++) {
> -		u32 val, mask = bpd[i].bus_prot_mask;
> +		u32 val;
> +		u32 set_clr_mask = bpd[i].bus_prot_set_clr_mask;
> +		u32 sta_mask = bpd[i].bus_prot_sta_mask;
>   
> -		if (!mask)
> +		if (!set_clr_mask)
>   			break;
>   
>   		if (bpd[i].flags & BUS_PROT_REG_UPDATE)
> -			regmap_set_bits(regmap, bpd[i].bus_prot_set, mask);
> +			regmap_set_bits(regmap, bpd[i].bus_prot_set, set_clr_mask);
>   		else
> -			regmap_write(regmap, bpd[i].bus_prot_set, mask);
> +			regmap_write(regmap, bpd[i].bus_prot_set, set_clr_mask);
>   
>   		ret = regmap_read_poll_timeout(regmap, bpd[i].bus_prot_sta,
> -					       val, (val & mask) == mask,
> +					       val, (val & sta_mask) == sta_mask,
>   					       MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
>   		if (ret)
>   			return ret;
> @@ -160,21 +162,23 @@ static int _scpsys_bus_protect_disable(const struct scpsys_bus_prot_data *bpd,
>   	int i, ret;
>   
>   	for (i = SPM_MAX_BUS_PROT_DATA - 1; i >= 0; i--) {
> -		u32 val, mask = bpd[i].bus_prot_mask;
> +		u32 val;
> +		u32 set_clr_mask = bpd[i].bus_prot_set_clr_mask;
> +		u32 sta_mask = bpd[i].bus_prot_sta_mask;

Only one nitpick: val should be declared after the others....
That's just for readability and nothing else, obviously.

Anyway, after that change:

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Re: [PATCH v6 3/8] soc: mediatek: pm-domains: Split bus_prot_mask
Posted by Alexandre Mergnat 1 year, 4 months ago 
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>


On 27/06/2023 15:10, Markus Schneider-Pargmann wrote:
> bus_prot_mask is used for all operations, set clear and acknowledge. In
> preparation of m8365 power domain support split this one mask into two,
> one mask for set and clear, another one for acknowledge.

-- 
Regards,
Alexandre

Patchew 2.1-devel-b67e4c2

© 2016 - 2024 Red Hat, Inc.