The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when
suspend which will let the ohci_irq() skip the interrupt after resume. And
nobody to handle this interrupt.

According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset
when resume from suspend(MEM) to fix.

Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
---
 drivers/usb/host/ohci-at91.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index b9ce8d80f20b..1a0356d9ea15 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -672,7 +672,12 @@ ohci_hcd_at91_drv_resume(struct device *dev)
 	else
 		at91_start_clock(ohci_at91);
 
-	ohci_resume(hcd, false);
+	/*
+	 * need to reset according to the comment of suspend routine,
+	 * otherwise the ohci_irq would skip the interrupt if ohci_state
+	 * was OHCI_RH_HALTED.
+	 */
+	ohci_resume(hcd, !ohci_at91->wakeup);
 
 	return 0;
 }
-- 
2.25.1

On Mon, Jun 26, 2023 at 12:15:53AM +0800, Guiting Shen wrote:
> The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when
> suspend which will let the ohci_irq() skip the interrupt after resume. And
> nobody to handle this interrupt.
> 
> According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset
> when resume from suspend(MEM) to fix.
> 
> Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
> ---
>  drivers/usb/host/ohci-at91.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> index b9ce8d80f20b..1a0356d9ea15 100644
> --- a/drivers/usb/host/ohci-at91.c
> +++ b/drivers/usb/host/ohci-at91.c
> @@ -672,7 +672,12 @@ ohci_hcd_at91_drv_resume(struct device *dev)
>  	else
>  		at91_start_clock(ohci_at91);
>  
> -	ohci_resume(hcd, false);
> +	/*
> +	 * need to reset according to the comment of suspend routine,
> +	 * otherwise the ohci_irq would skip the interrupt if ohci_state
> +	 * was OHCI_RH_HALTED.
> +	 */
> +	ohci_resume(hcd, !ohci_at91->wakeup);

This comment doesn't say why the code uses !ohci_at91->wakeup.  It 
should explain that.  For example:

	/*
	 * According to the comment in ohci_hcd_at91_drv_suspend()
	 * we need to do a reset if the 48-MHz clock was stopped,
	 * that is, if ohci_at91->wakeup is clear.  Tell ohci_resume()
	 * to reset in this case by setting its "hibernated" flag.
	 */

Alan Stern

On Mon, Jun 26, 2023 at 04:04:29AM GMT+8, Alan Stern wrote:
> On Mon, Jun 26, 2023 at 12:15:53AM +0800, Guiting Shen wrote:
>> The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when
>> suspend which will let the ohci_irq() skip the interrupt after resume. And
>> nobody to handle this interrupt.
>>
>> According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset
>> when resume from suspend(MEM) to fix.
>>
>> Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
>> ---
>>  drivers/usb/host/ohci-at91.c | 7 ++++++-
>>  1 file changed, 6 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
>> index b9ce8d80f20b..1a0356d9ea15 100644
>> --- a/drivers/usb/host/ohci-at91.c
>> +++ b/drivers/usb/host/ohci-at91.c
>> @@ -672,7 +672,12 @@ ohci_hcd_at91_drv_resume(struct device *dev)
>>  	else
>>  		at91_start_clock(ohci_at91);
>>  
>> -	ohci_resume(hcd, false);
>> +	/*
>> +	 * need to reset according to the comment of suspend routine,
>> +	 * otherwise the ohci_irq would skip the interrupt if ohci_state
>> +	 * was OHCI_RH_HALTED.
>> +	 */
>> +	ohci_resume(hcd, !ohci_at91->wakeup);
> 
> This comment doesn't say why the code uses !ohci_at91->wakeup.  It 
> should explain that.  For example:
> 
> 	/*
> 	 * According to the comment in ohci_hcd_at91_drv_suspend()
> 	 * we need to do a reset if the 48-MHz clock was stopped,
> 	 * that is, if ohci_at91->wakeup is clear.  Tell ohci_resume()
> 	 * to reset in this case by setting its "hibernated" flag.
> 	 */
> 

Ok, Thank you!
Do I send the v3 patch after the merge window close?

-- 
Regards,
Guiting Shen

On Mon, Jun 26, 2023 at 10:28:26AM +0800, Guiting Shen wrote:
> On Mon, Jun 26, 2023 at 04:04:29AM GMT+8, Alan Stern wrote:
> > This comment doesn't say why the code uses !ohci_at91->wakeup.  It 
> > should explain that.  For example:
> > 
> > 	/*
> > 	 * According to the comment in ohci_hcd_at91_drv_suspend()
> > 	 * we need to do a reset if the 48-MHz clock was stopped,
> > 	 * that is, if ohci_at91->wakeup is clear.  Tell ohci_resume()
> > 	 * to reset in this case by setting its "hibernated" flag.
> > 	 */
> > 
> 
> Ok, Thank you!
> Do I send the v3 patch after the merge window close?

You can send the patch at any time.  It doesn't matter whether the merge 
window is open or closed.

Alan Stern