RX BIST frame counters can be used only when the PHY is in test mode. In
production mode, the counters will be always read as 0. So, they don't
provide any useful information and are removed from the statistics.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
---
drivers/net/phy/nxp-c45-tja11xx.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
index 41b8af0547e4..f1f15a1b6cfc 100644
--- a/drivers/net/phy/nxp-c45-tja11xx.c
+++ b/drivers/net/phy/nxp-c45-tja11xx.c
@@ -81,9 +81,6 @@
#define VEND1_SYMBOL_ERROR_COUNTER 0x8350
#define VEND1_LINK_DROP_COUNTER 0x8352
#define VEND1_LINK_LOSSES_AND_FAILURES 0x8353
-#define VEND1_R_GOOD_FRAME_CNT 0xA950
-#define VEND1_R_BAD_FRAME_CNT 0xA952
-#define VEND1_R_RXER_FRAME_CNT 0xA954
#define VEND1_RX_PREAMBLE_COUNT 0xAFCE
#define VEND1_TX_PREAMBLE_COUNT 0xAFCF
#define VEND1_RX_IPG_LENGTH 0xAFD0
@@ -809,12 +806,6 @@ static const struct nxp_c45_phy_stats nxp_c45_hw_stats[] = {
VEND1_LINK_LOSSES_AND_FAILURES, 10, GENMASK(15, 10) },
{ "phy_link_failure_cnt", MDIO_MMD_VEND1,
VEND1_LINK_LOSSES_AND_FAILURES, 0, GENMASK(9, 0) },
- { "r_good_frame_cnt", MDIO_MMD_VEND1,
- VEND1_R_GOOD_FRAME_CNT, 0, GENMASK(15, 0) },
- { "r_bad_frame_cnt", MDIO_MMD_VEND1,
- VEND1_R_BAD_FRAME_CNT, 0, GENMASK(15, 0) },
- { "r_rxer_frame_cnt", MDIO_MMD_VEND1,
- VEND1_R_RXER_FRAME_CNT, 0, GENMASK(15, 0) },
{ "rx_preamble_count", MDIO_MMD_VEND1,
VEND1_RX_PREAMBLE_COUNT, 0, GENMASK(5, 0) },
{ "tx_preamble_count", MDIO_MMD_VEND1,
--
2.34.1