Adding a new driver for the MIPI CSI CD-PHY module v 0.5 embedded in
some Mediatek soc, such as the MT8365

This driver was adapted from https://patchwork.kernel.org/project/linux-mediatek/cover/20200708104023.3225-1-louis.kuo@mediatek.com/

v1 can be found here: https://lore.kernel.org/all/20230403071929.360911-1-jstephan@baylibre.com/

v2 can be found here: https://lore.kernel.org/all/20230515090551.1251389-1-jstephan@baylibre.com/

v3 can be found here: https://lore.kernel.org/all/20230524083033.486490-1-jstephan@baylibre.com/

Changelog
Changes in v4:
include/dt-bindings/phy/phy.h:
	- remove commit adding PHY_TYPE_CDPHY definition

Binding file:
	- use the standard phy-type property instead of a custom one so
	  rename mediatek,phy-type -> phy-type
	- phy-type property is made optional: when present, describes the
	  phy type and the operating mode
	- phy-cell is modified to accept a phy argument representing the
	  phy operating mode if phy-type is not specified
	- adding new property num-lanes

Driver:
	- add a custom xlate function to handle phy cells
	- update probe function to retrieve the new value phy-type
	  instead of the mediatek,phy-type
	- remove useless struct define `struct mtk_mipi_dphy;`
	- rename some functin/variable from `xx_dphy_xx` to `xx_cdphy_xx`
	- update probe function to read num-lanes property

Changes in v3:
Binding file:
	- rename compatible string
	  mediatek,phy-mipi-csi-0-5 -> mediatek,mt8365-csi-rx
	- rename binding file to be as compatible string
	- change property mediatek,is_cdphy -> mediatek,phy-type using an
	  enum value instead of boolean for scalability
	- remove status property from example nodes
	- rename example node name 'mipi_rx_csi0: mipi_rx_csi0@11c10000' ->
	  'csi0_rx: phy@11c10000'
	- put reg address in lower case

include/dt-bindings/phy/phy.h:
	- add PHY_TYPE_CDPHY definition

Driver:
	- rename compatible string
	- rename property mediatek,is_cdphy -> mediatek,phy-type
	- rename CSIx* macro to CSIX* (x -> X)
	- fix style issue on the driver data structure
	- update MODULE_DESCRIPTION as suggested by Angelo
	  and update the kconfig module description to match it
	- add dphy /cdphy eq tuning function to factor the code
	  and increase readability
	- fix typo __PHY_MTK__MIPI_CSI__C_0_5_RX_REG_H_ -->
	  __PHY_MTK_MIPI_CSI_V_0_5_RX_REG_H_
	- reword commit message to update my contributions
	- added missing copyright
	- added module name in Kconfig

Changes in v2:
	- fix all comments on bindings
	- move the binding chunk from driver to binding commit
	- fix dt_binding_check error (reported by DT_CHECKER_FLAGS)
	- use a more generic compatible string
	- add a new dt properties to simplify the driver
	  "mediatek,is_cdphy"
	- rename the driver and the corresponding file to include
	  version
	- drop of_match_ptr()
	- use devm_platform_ioremap_resource
	- use phy-mtk-io.h api instead of regmap
	- rework the driver to use dt nodes to declare PHY instead of an
	  array in the driver
	- remove useless define for unused registers
	- remove support for CSI0A/B because it cannot be tested, and it
	  simplifies the driver for a first review
	- edit commit message and bindings to be more descriptive about the
	  hardware


Florian Sylvestre (1):
  dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5

Julien Stephan (1):
  phy use phy-type

Phi-bang Nguyen (1):
  phy: mtk-mipi-csi: add driver for CSI phy

 .../bindings/phy/mediatek,mt8365-csi-rx.yaml  |  73 ++++
 MAINTAINERS                                   |   7 +
 drivers/phy/mediatek/Kconfig                  |  12 +
 drivers/phy/mediatek/Makefile                 |   2 +
 .../mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h    |  62 ++++
 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c   | 331 ++++++++++++++++++
 6 files changed, 487 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
 create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h
 create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c

--




2.41.0