Hi all,
Today's linux-next merge of the net-next tree got a conflict in:
tools/testing/selftests/net/mptcp/mptcp_join.sh
between commits:
47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not")
from the net tree and commits:
45b1a1227a7a ("mptcp: introduces more address related mibs")
0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
from the net-next tree.
I fixed it up (I think - see below) and can carry the fix as necessary.
This is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging. You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.
--
Cheers,
Stephen Rothwell
diff --cc tools/testing/selftests/net/mptcp/mptcp_join.sh
index 0ae8cafde439,85474e029784..000000000000
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@@ -1360,27 -1265,23 +1355,25 @@@ chk_fclose_nr(
fi
printf "%-${nr_blank}s %s" " " "ctx"
- count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFastcloseTx | awk '{print $2}')
- [ -z "$count" ] && count=0
- [ "$count" != "$fclose_tx" ] && extra_msg="$extra_msg,tx=$count"
- if [ "$count" != "$fclose_tx" ]; then
+ count=$(get_counter ${ns_tx} "MPTcpExtMPFastcloseTx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$fclose_tx" ]; then
+ extra_msg="$extra_msg,tx=$count"
echo "[fail] got $count MP_FASTCLOSE[s] TX expected $fclose_tx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
echo -n " - fclzrx"
- count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFastcloseRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- [ "$count" != "$fclose_rx" ] && extra_msg="$extra_msg,rx=$count"
- if [ "$count" != "$fclose_rx" ]; then
+ count=$(get_counter ${ns_rx} "MPTcpExtMPFastcloseRx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$fclose_rx" ]; then
+ extra_msg="$extra_msg,rx=$count"
echo "[fail] got $count MP_FASTCLOSE[s] RX expected $fclose_rx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
@@@ -1408,25 -1306,21 +1398,23 @@@ chk_rst_nr(
fi
printf "%-${nr_blank}s %s" " " "rtx"
- count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPRstTx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ $count -lt $rst_tx ]; then
+ count=$(get_counter ${ns_tx} "MPTcpExtMPRstTx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ $count -lt $rst_tx ]; then
echo "[fail] got $count MP_RST[s] TX expected $rst_tx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
echo -n " - rstrx "
- count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPRstRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" -lt "$rst_rx" ]; then
+ count=$(get_counter ${ns_rx} "MPTcpExtMPRstRx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" -lt "$rst_rx" ]; then
echo "[fail] got $count MP_RST[s] RX expected $rst_rx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
@@@ -1441,28 -1333,23 +1427,25 @@@ chk_infi_nr(
local infi_tx=$1
local infi_rx=$2
local count
- local dump_stats
printf "%-${nr_blank}s %s" " " "itx"
- count=$(ip netns exec $ns2 nstat -as | grep InfiniteMapTx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$infi_tx" ]; then
+ count=$(get_counter ${ns2} "MPTcpExtInfiniteMapTx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$infi_tx" ]; then
echo "[fail] got $count infinite map[s] TX expected $infi_tx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
echo -n " - infirx"
- count=$(ip netns exec $ns1 nstat -as | grep InfiniteMapRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$infi_rx" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtInfiniteMapRx")
+ if [ -z "$count" ]; then
+ echo "[skip]"
+ elif [ "$count" != "$infi_rx" ]; then
echo "[fail] got $count infinite map[s] RX expected $infi_rx"
fail_test
- dump_stats=1
else
echo "[ ok ]"
fi
@@@ -1491,13 -1375,11 +1471,12 @@@ chk_join_nr(
fi
printf "%03u %-36s %s" "${TEST_COUNT}" "${title}" "syn"
- count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$syn_nr" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtMPJoinSynRx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$syn_nr" ]; then
echo "[fail] got $count JOIN[s] syn expected $syn_nr"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
@@@ -1523,13 -1403,11 +1501,12 @@@
fi
echo -n " - ack"
- count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinAckRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$ack_nr" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtMPJoinAckRx")
+ if [ -z "$count" ]; then
+ echo "[skip]"
+ elif [ "$count" != "$ack_nr" ]; then
echo "[fail] got $count JOIN[s] ack expected $ack_nr"
fail_test
- dump_stats=1
else
echo "[ ok ]"
fi
@@@ -1599,40 -1475,35 +1574,37 @@@ chk_add_nr(
timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout)
printf "%-${nr_blank}s %s" " " "add"
- count=$(ip netns exec $ns2 nstat -as MPTcpExtAddAddr | grep MPTcpExtAddAddr | awk '{print $2}')
- [ -z "$count" ] && count=0
-
+ count=$(get_counter ${ns2} "MPTcpExtAddAddr")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
# if the test configured a short timeout tolerate greater then expected
# add addrs options, due to retransmissions
- if [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then
+ elif [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then
echo "[fail] got $count ADD_ADDR[s] expected $add_nr"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
echo -n " - echo "
- count=$(ip netns exec $ns1 nstat -as MPTcpExtEchoAdd | grep MPTcpExtEchoAdd | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$echo_nr" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtEchoAdd")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$echo_nr" ]; then
echo "[fail] got $count ADD_ADDR echo[s] expected $echo_nr"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
if [ $port_nr -gt 0 ]; then
echo -n " - pt "
- count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtPortAdd | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$port_nr" ]; then
+ count=$(get_counter ${ns2} "MPTcpExtPortAdd")
+ if [ -z "$count" ]; then
+ echo "[skip]"
+ elif [ "$count" != "$port_nr" ]; then
echo "[fail] got $count ADD_ADDR[s] with a port-number expected $port_nr"
fail_test
- dump_stats=1
else
echo "[ ok ]"
fi
@@@ -1737,13 -1633,11 +1734,12 @@@ chk_rm_nr(
fi
printf "%-${nr_blank}s %s" " " "rm "
- count=$(ip netns exec $addr_ns nstat -as MPTcpExtRmAddr | grep MPTcpExtRmAddr | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$rm_addr_nr" ]; then
+ count=$(get_counter ${addr_ns} "MPTcpExtRmAddr")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$rm_addr_nr" ]; then
echo "[fail] got $count RM_ADDR[s] expected $rm_addr_nr"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
@@@ -1767,12 -1661,12 +1763,10 @@@
else
echo "[fail] got $count RM_SUBFLOW[s] expected in range [$rm_subflow_nr:$((rm_subflow_nr*2))]"
fail_test
- dump_stats=1
fi
- return
- fi
- if [ "$count" != "$rm_subflow_nr" ]; then
+ elif [ "$count" != "$rm_subflow_nr" ]; then
echo "[fail] got $count RM_SUBFLOW[s] expected $rm_subflow_nr"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
@@@ -1787,28 -1696,23 +1796,25 @@@ chk_prio_nr(
local mp_prio_nr_tx=$1
local mp_prio_nr_rx=$2
local count
- local dump_stats
printf "%-${nr_blank}s %s" " " "ptx"
- count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$mp_prio_nr_tx" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtMPPrioTx")
+ if [ -z "$count" ]; then
+ echo -n "[skip]"
+ elif [ "$count" != "$mp_prio_nr_tx" ]; then
echo "[fail] got $count MP_PRIO[s] TX expected $mp_prio_nr_tx"
fail_test
- dump_stats=1
else
echo -n "[ ok ]"
fi
echo -n " - prx "
- count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}')
- [ -z "$count" ] && count=0
- if [ "$count" != "$mp_prio_nr_rx" ]; then
+ count=$(get_counter ${ns1} "MPTcpExtMPPrioRx")
+ if [ -z "$count" ]; then
+ echo "[skip]"
+ elif [ "$count" != "$mp_prio_nr_rx" ]; then
echo "[fail] got $count MP_PRIO[s] RX expected $mp_prio_nr_rx"
fail_test
- dump_stats=1
else
echo "[ ok ]"
fi
@@@ -2394,12 -2290,8 +2399,13 @@@ remove_tests(
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
chk_join_nr 3 3 3
+ chk_rm_tx_nr 0
- chk_rm_nr 0 3 simult
+
+ if mptcp_lib_kversion_ge 5.18; then
+ chk_rm_nr 0 3 simult
+ else
+ chk_rm_nr 3 3
+ fi
fi
# addresses flush
Hi Stephen,
On 14/06/2023 03:17, Stephen Rothwell wrote:
> Hi all,
>
> Today's linux-next merge of the net-next tree got a conflict in:
>
> tools/testing/selftests/net/mptcp/mptcp_join.sh
>
> between commits:
>
> 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
> 425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not")
>
> from the net tree and commits:
>
> 45b1a1227a7a ("mptcp: introduces more address related mibs")
> 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
>
> from the net-next tree.
>
> I fixed it up (I think - see below) and can carry the fix as necessary.
> This is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging. You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
Thank you for the conflicts resolution. If I'm not mistaken, it looks
good except the last chunk where the new call to chk_rm_tx_nr() should
go inside the 'if' statement. So instead of this bit you have on your side:
> @@@ -2394,12 -2290,8 +2399,13 @@@ remove_tests(
> pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
> run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
> chk_join_nr 3 3 3
> + chk_rm_tx_nr 0
> - chk_rm_nr 0 3 simult
> +
> + if mptcp_lib_kversion_ge 5.18; then
> + chk_rm_nr 0 3 simult
> + else
> + chk_rm_nr 3 3
> + fi
> fi
>
> # addresses flush
We should have:
> @@@ -2394,12 -2290,8 +2399,13 @@@ remove_tests(
> pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
> run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
> chk_join_nr 3 3 3
> - chk_rm_tx_nr 0
> - chk_rm_nr 0 3 simult
> +
> + if mptcp_lib_kversion_ge 5.18; then
> ++ chk_rm_tx_nr 0
> + chk_rm_nr 0 3 simult
> + else
> + chk_rm_nr 3 3
> + fi
> fi
>
> # addresses flush
("chk_rm_tx_nr 0" needs to be inside the 'if')
I added a note about the conflicts on the cover-letter:
https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/
Maybe it was not a good place? I didn't know where to put it as there
were multiple patches that were conflicting with each others even if the
major conflicts were between 47867f0a7e83 ("selftests: mptcp: join: skip
check if MIB counter not supported") and 0639fa230a21 ("selftests:
mptcp: add explicit check for new mibs"). I guess next time I should add
a comment referring to the cover-letter in the patches creating conflicts.
Cheers,
Matt
--
Tessares | Belgium | Hybrid Access Solutions
www.tessares.net
On Wed, 14 Jun 2023 10:51:16 +0200 Matthieu Baerts wrote:
> I added a note about the conflicts on the cover-letter:
>
> https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/
>
> Maybe it was not a good place? I didn't know where to put it as there
> were multiple patches that were conflicting with each others even if the
> major conflicts were between 47867f0a7e83 ("selftests: mptcp: join: skip
> check if MIB counter not supported") and 0639fa230a21 ("selftests:
> mptcp: add explicit check for new mibs"). I guess next time I should add
> a comment referring to the cover-letter in the patches creating conflicts.
Hm, yeah, I think the cover letter may not be the best way.
Looks like Stephen didn't use it, anyway, and it confused patchwork.
No better idea where to put it tho :(
Maybe a link to a git rerere resolution uploaded somewhere we can wget
from easily?
Hi Jakub,
On 14/06/2023 19:41, Jakub Kicinski wrote:
> On Wed, 14 Jun 2023 10:51:16 +0200 Matthieu Baerts wrote:
>> I added a note about the conflicts on the cover-letter:
>>
>> https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/
>>
>> Maybe it was not a good place? I didn't know where to put it as there
>> were multiple patches that were conflicting with each others even if the
>> major conflicts were between 47867f0a7e83 ("selftests: mptcp: join: skip
>> check if MIB counter not supported") and 0639fa230a21 ("selftests:
>> mptcp: add explicit check for new mibs"). I guess next time I should add
>> a comment referring to the cover-letter in the patches creating conflicts.
>
> Hm, yeah, I think the cover letter may not be the best way.
> Looks like Stephen didn't use it, anyway, and it confused patchwork.
> No better idea where to put it tho :(
>
> Maybe a link to a git rerere resolution uploaded somewhere we can wget
> from easily?
Good idea, I didn't think about git rerere! I will try to remember about
that next time :)
Cheers,
Matt
--
Tessares | Belgium | Hybrid Access Solutions
www.tessares.net
Hi Matthieu, On Wed, 14 Jun 2023 10:51:16 +0200 Matthieu Baerts <matthieu.baerts@tessares.net> wrote: > > Thank you for the conflicts resolution. If I'm not mistaken, it looks > good except the last chunk where the new call to chk_rm_tx_nr() should > go inside the 'if' statement. So instead of this bit you have on your side: Thanks for checking this. I will amend my resolution in linux-next from tomorrow. -- Cheers, Stephen Rothwell
© 2016 - 2026 Red Hat, Inc.