watermark value is the minimum amount of packet data
required to activate the forwarding process. The watermark
implementation and maximum size is dependent on the device
where Cadence MACB/GEM is used.

Signed-off-by: Pranavi Somisetty <pranavi.somisetty@amd.com>
---
Changes v2:
None (patch added in v2)

Changes v3:
1. Fixed DT schema error: "scalar properties shouldn't have array keywords".
2. Modified description of rx-watermark to include units of the watermark value.
3. Modified the DT property name corresponding to rx_watermark in
pbuf_rxcutthru to "cdns,rx-watermark".
4. Modified commit description to remove references to Xilinx platforms,
since the changes aren't platform specific.

Changes v4:
1. Modified description for "rx-watermark" property in the DT bindings.
2. Changed the width of the rx-watermark property to uint32.
---
 Documentation/devicetree/bindings/net/cdns,macb.yaml | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
index bef5e0f895be..bf8894a0257e 100644
--- a/Documentation/devicetree/bindings/net/cdns,macb.yaml
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -109,6 +109,16 @@ properties:
   power-domains:
     maxItems: 1
 
+  cdns,rx-watermark:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the receive partial store and forward mode is activated,
+      the receiver will only begin to forward the packet to the external
+      AHB or AXI slave when enough packet data is stored in the SRAM packet buffer.
+      rx-watermark corresponds to the number of SRAM buffer locations,
+      that need to be filled, before the forwarding process is activated.
+      Width of the SRAM is platform dependent, and can be 4, 8 or 16 bytes.
+
   '#address-cells':
     const: 1
 
@@ -166,6 +176,7 @@ examples:
             compatible = "cdns,macb";
             reg = <0xfffc4000 0x4000>;
             interrupts = <21>;
+            cdns,rx-watermark = <0x44>;
             phy-mode = "rmii";
             local-mac-address = [3a 0e 03 04 05 06];
             clock-names = "pclk", "hclk", "tx_clk";
-- 
2.36.1

On 13/06/2023 07:43, Pranavi Somisetty wrote:
> watermark value is the minimum amount of packet data
> required to activate the forwarding process. The watermark
> implementation and maximum size is dependent on the device
> where Cadence MACB/GEM is used.
> 
> Signed-off-by: Pranavi Somisetty <pranavi.somisetty@amd.com>
> ---
> Changes v2:


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

On 15/06/2023 at 10:23, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 13/06/2023 07:43, Pranavi Somisetty wrote:
>> watermark value is the minimum amount of packet data
>> required to activate the forwarding process. The watermark
>> implementation and maximum size is dependent on the device
>> where Cadence MACB/GEM is used.
>>
>> Signed-off-by: Pranavi Somisetty <pranavi.somisetty@amd.com>
>> ---
>> Changes v2:
> 
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

If mine is needed as well:
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>


-- 
Nicolas Ferre