From: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add option to toggle DROP_RE bit in rx cfg mbox. This helps in
modifying the config runtime as opposed to setting available via
nix_lf_alloc() mbox at NIX LF init time.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob Kollanukkaran <jerinj@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
---
drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 1 +
drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 5 +++++
2 files changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index 1794ef0f9ae0..eba307eee2b2 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -1157,6 +1157,7 @@ struct nix_rx_cfg {
struct mbox_msghdr hdr;
#define NIX_RX_OL3_VERIFY BIT(0)
#define NIX_RX_OL4_VERIFY BIT(1)
+#define NIX_RX_DROP_RE BIT(2)
u8 len_verify; /* Outer L3/L4 len check */
#define NIX_RX_CSUM_OL4_VERIFY BIT(0)
u8 csum_verify; /* Outer L4 checksum verification */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 8a89cc5e5e40..23149036be77 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -4196,6 +4196,11 @@ int rvu_mbox_handler_nix_set_rx_cfg(struct rvu *rvu, struct nix_rx_cfg *req,
else
cfg &= ~BIT_ULL(40);
+ if (req->len_verify & NIX_RX_DROP_RE)
+ cfg |= BIT_ULL(32);
+ else
+ cfg &= ~BIT_ULL(32);
+
if (req->csum_verify & BIT(0))
cfg |= BIT_ULL(37);
else
--
2.39.0.198.ga38d39a4c5