Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/extcon/wlf,arizona.yaml    | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
index efdf59abb2e1..351b202d0e10 100644
--- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
@@ -23,7 +23,7 @@ properties:
       headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
       to HPDETR.  If this node is not included or if the value is unknown,
       then headphone detection mode is set to HPDETL.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 1
     maximum: 2
 
@@ -51,7 +51,7 @@ properties:
     description:
       Additional software microphone detection debounce specified in
       milliseconds.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   wlf,micd-pol-gpio:
     description:
@@ -63,7 +63,7 @@ properties:
     description:
       Time allowed for MICBIAS to startup prior to performing microphone
       detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 12
 
@@ -71,7 +71,7 @@ properties:
     description:
       Delay between successive microphone detection measurements, specified
       as per the ARIZONA_MICD_TIME_XXX defines.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 12
 
@@ -79,7 +79,7 @@ properties:
     description:
       Microphone detection hardware debounces specified as the number of
       measurements to take.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [2, 4]
 
   wlf,micd-timeout-ms:
@@ -97,7 +97,7 @@ properties:
       CTIA / OMTP headsets), the field can be of variable length but
       should always be a multiple of 3 cells long, each three cell group
       represents one polarity configuration.
-    $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     items:
       items:
         - description:
@@ -119,7 +119,7 @@ properties:
     description:
       Settings for the general purpose switch, set as one of the
       ARIZONA_GPSW_XXX defines.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
-- 
2.34.1

On 23. 6. 9. 23:07, Krzysztof Kozlowski wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/extcon/wlf,arizona.yaml    | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
> index efdf59abb2e1..351b202d0e10 100644
> --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
> +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
> @@ -23,7 +23,7 @@ properties:
>        headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
>        to HPDETR.  If this node is not included or if the value is unknown,
>        then headphone detection mode is set to HPDETL.
> -    $ref: "/schemas/types.yaml#/definitions/uint32"
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      minimum: 1
>      maximum: 2
>  
> @@ -51,7 +51,7 @@ properties:
>      description:
>        Additional software microphone detection debounce specified in
>        milliseconds.
> -    $ref: "/schemas/types.yaml#/definitions/uint32"
> +    $ref: /schemas/types.yaml#/definitions/uint32
>  
>    wlf,micd-pol-gpio:
>      description:
> @@ -63,7 +63,7 @@ properties:
>      description:
>        Time allowed for MICBIAS to startup prior to performing microphone
>        detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
> -    $ref: "/schemas/types.yaml#/definitions/uint32"
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      minimum: 0
>      maximum: 12
>  
> @@ -71,7 +71,7 @@ properties:
>      description:
>        Delay between successive microphone detection measurements, specified
>        as per the ARIZONA_MICD_TIME_XXX defines.
> -    $ref: "/schemas/types.yaml#/definitions/uint32"
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      minimum: 0
>      maximum: 12
>  
> @@ -79,7 +79,7 @@ properties:
>      description:
>        Microphone detection hardware debounces specified as the number of
>        measurements to take.
> -    $ref: "/schemas/types.yaml#/definitions/uint32"
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [2, 4]
>  
>    wlf,micd-timeout-ms:
> @@ -97,7 +97,7 @@ properties:
>        CTIA / OMTP headsets), the field can be of variable length but
>        should always be a multiple of 3 cells long, each three cell group
>        represents one polarity configuration.
> -    $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
>      items:
>        items:
>          - description:
> @@ -119,7 +119,7 @@ properties:
>      description:
>        Settings for the general purpose switch, set as one of the
>        ARIZONA_GPSW_XXX defines.
> -    $ref: "/schemas/types.yaml#/definitions/uint32"
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      minimum: 0
>      maximum: 3
>  

Applied it.Thanks.

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi