This WiFi AP is based on a MT7621 SoC with 128MiB RAM, 128MiB NAND,
a MT7603 2.4GHz WiFi and a MT7613 5GHz WiFi chips integrated on the board,
connected to the main SoC over PCIe.

The device uses NMBM over NAND, which is not currently supported in the
mainline, so NAND node is skipped in this revision.

Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
---
 arch/mips/boot/dts/ralink/Makefile            |  3 +-
 .../dts/ralink/mt7621-tplink-hc220-g5-v1.dts  | 84 +++++++++++++++++++
 2 files changed, 86 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts

diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile
index 11732b8c8163a..d27d7e8c700fe 100644
--- a/arch/mips/boot/dts/ralink/Makefile
+++ b/arch/mips/boot/dts/ralink/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_DTB_VOCORE2)	+= vocore2.dtb
 
 dtb-$(CONFIG_SOC_MT7621) += \
 	mt7621-gnubee-gb-pc1.dtb \
-	mt7621-gnubee-gb-pc2.dtb
+	mt7621-gnubee-gb-pc2.dtb \
+	mt7621-tplink-hc220-g5-v1.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts b/arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts
new file mode 100644
index 0000000000000..2d2eadc6b95f3
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "tplink,hc220-g5-v1", "mediatek,mt7621-soc";
+	model = "TP-Link HC220 G5 v1";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "earlycon console=ttyS0,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-reset {
+			label = "reset";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		key-wps {
+			label = "wps";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fault {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_FAULT;
+			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "wan";
+		};
+	};
+};
-- 
2.40.1

On Tue, Jun 6, 2023 at 11:16 PM Liviu Dudau <liviu@dudau.co.uk> wrote:
>
> This WiFi AP is based on a MT7621 SoC with 128MiB RAM, 128MiB NAND,
> a MT7603 2.4GHz WiFi and a MT7613 5GHz WiFi chips integrated on the board,
> connected to the main SoC over PCIe.
>
> The device uses NMBM over NAND, which is not currently supported in the
> mainline, so NAND node is skipped in this revision.
>
> Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
> ---
>  arch/mips/boot/dts/ralink/Makefile            |  3 +-
>  .../dts/ralink/mt7621-tplink-hc220-g5-v1.dts  | 84 +++++++++++++++++++
>  2 files changed, 86 insertions(+), 1 deletion(-)

Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>

Thanks,
     Sergio Paracuellos

On 7.06.2023 00:16, Liviu Dudau wrote:
> This WiFi AP is based on a MT7621 SoC with 128MiB RAM, 128MiB NAND,
> a MT7603 2.4GHz WiFi and a MT7613 5GHz WiFi chips integrated on the board,
> connected to the main SoC over PCIe.
> 
> The device uses NMBM over NAND, which is not currently supported in the
> mainline, so NAND node is skipped in this revision.
> 
> Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>

Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Arınç