1. Patchew
  2. linux
  3. View series

[PATCH] gpio: tegra186: Check PMC driver status before any request

Prathamesh Shete posted 1 patch 2 years, 8 months ago
There is a newer version of this series
drivers/gpio/gpio-tegra186.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
[PATCH] gpio: tegra186: Check PMC driver status before any request
Posted by Prathamesh Shete 2 years, 8 months ago 
This patch fixes the issue where even if PMC driver status is
disabled still we are trying to look up for the IRQ domain
that PMC driver would've registered if it had been enabled.

Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
---
 drivers/gpio/gpio-tegra186.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index 464b0ea3b6f1..80d08ddde40e 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -964,11 +964,15 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
 
 	np = of_find_matching_node(NULL, tegra186_pmc_of_match);
 	if (np) {
-		irq->parent_domain = irq_find_host(np);
-		of_node_put(np);
-
-		if (!irq->parent_domain)
-			return -EPROBE_DEFER;
+		if (of_device_is_available(np)) {
+			irq->parent_domain = irq_find_host(np);
+			of_node_put(np);
+
+			if (!irq->parent_domain)
+				return -EPROBE_DEFER;
+		} else {
+			of_node_put(np);
+		}
 	}
 
 	irq->map = devm_kcalloc(&pdev->dev, gpio->gpio.ngpio,
-- 
2.17.1
Re: [PATCH] gpio: tegra186: Check PMC driver status before any request
Posted by Linus Walleij 2 years, 8 months ago 
On Tue, Jun 6, 2023 at 9:17 AM Prathamesh Shete <pshete@nvidia.com> wrote:

> This patch fixes the issue where even if PMC driver status is
> disabled still we are trying to look up for the IRQ domain
> that PMC driver would've registered if it had been enabled.
>
> Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
> Signed-off-by: Prathamesh Shete <pshete@nvidia.com>

Patch applied!

Yours,
Linus Walleij
Re: [PATCH] gpio: tegra186: Check PMC driver status before any request
Posted by andy.shevchenko@gmail.com 2 years, 8 months ago 
Tue, Jun 06, 2023 at 12:47:17PM +0530, Prathamesh Shete kirjoitti:
> This patch fixes the issue where even if PMC driver status is
> disabled still we are trying to look up for the IRQ domain
> that PMC driver would've registered if it had been enabled.

-ENOPARSE.

Also mind grammar punctuation.

-- 
With Best Regards,
Andy Shevchenko
Re: [PATCH] gpio: tegra186: Check PMC driver status before any request
Posted by Jon Hunter 2 years, 8 months ago 
On 06/06/2023 08:17, Prathamesh Shete wrote:
> This patch fixes the issue where even if PMC driver status is
> disabled still we are trying to look up for the IRQ domain
> that PMC driver would've registered if it had been enabled.

It might be clearer to say ...

When the PMC device is disabled, probing of the Tegra186 GPIO driver 
fails because the IRQ domain that is registered by the PMC driver is not 
found. Fix this by checking to see if the PMC device is enabled before 
attempting to lookup the IRQ domain registered by the PMC.

Otherwise ...

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>

> Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
> Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
> ---
>   drivers/gpio/gpio-tegra186.c | 14 +++++++++-----
>   1 file changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
> index 464b0ea3b6f1..80d08ddde40e 100644
> --- a/drivers/gpio/gpio-tegra186.c
> +++ b/drivers/gpio/gpio-tegra186.c
> @@ -964,11 +964,15 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
>   
>   	np = of_find_matching_node(NULL, tegra186_pmc_of_match);
>   	if (np) {
> -		irq->parent_domain = irq_find_host(np);
> -		of_node_put(np);
> -
> -		if (!irq->parent_domain)
> -			return -EPROBE_DEFER;
> +		if (of_device_is_available(np)) {
> +			irq->parent_domain = irq_find_host(np);
> +			of_node_put(np);
> +
> +			if (!irq->parent_domain)
> +				return -EPROBE_DEFER;
> +		} else {
> +			of_node_put(np);
> +		}
>   	}
>   
>   	irq->map = devm_kcalloc(&pdev->dev, gpio->gpio.ngpio,

-- 
nvpublic
Re: [PATCH] gpio: tegra186: Check PMC driver status before any request
Posted by Jon Hunter 2 years, 8 months ago 
On 06/06/2023 09:53, Jon Hunter wrote:
> 
> On 06/06/2023 08:17, Prathamesh Shete wrote:
>> This patch fixes the issue where even if PMC driver status is
>> disabled still we are trying to look up for the IRQ domain
>> that PMC driver would've registered if it had been enabled.
> 
> It might be clearer to say ...
> 
> When the PMC device is disabled, probing of the Tegra186 GPIO driver 
> fails because the IRQ domain that is registered by the PMC driver is not 
> found. Fix this by checking to see if the PMC device is enabled before 
> attempting to lookup the IRQ domain registered by the PMC.

It could also be worth noting that it is OK to skip the PMC IRQ domain 
in this case because this only impacts wake-ups and not GPIO 
functionality in general.

Jon

-- 
nvpublic
[PATCH v2] gpio: tegra186: Check PMC driver status before any request
Posted by Prathamesh Shete 2 years, 8 months ago 
When the PMC device is disabled, probing of the Tegra186 GPIO driver
fails because the IRQ domain that is registered by the PMC driver is
not found. The PMC IRQ domain is only used for wake-up and does not
impact GPIO functionality in general. Therefore, if the PMC device is
disabled, skip looking up the PMC IRQ domain to allow the GPIO driver
to be probed.

Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
---
 drivers/gpio/gpio-tegra186.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index 464b0ea3b6f1..80d08ddde40e 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -964,11 +964,15 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
 
 	np = of_find_matching_node(NULL, tegra186_pmc_of_match);
 	if (np) {
-		irq->parent_domain = irq_find_host(np);
-		of_node_put(np);
-
-		if (!irq->parent_domain)
-			return -EPROBE_DEFER;
+		if (of_device_is_available(np)) {
+			irq->parent_domain = irq_find_host(np);
+			of_node_put(np);
+
+			if (!irq->parent_domain)
+				return -EPROBE_DEFER;
+		} else {
+			of_node_put(np);
+		}
 	}
 
 	irq->map = devm_kcalloc(&pdev->dev, gpio->gpio.ngpio,
-- 
2.17.1
Re: [PATCH v2] gpio: tegra186: Check PMC driver status before any request
Posted by Thierry Reding 2 years, 8 months ago 
On Wed, Jun 07, 2023 at 05:01:04PM +0530, Prathamesh Shete wrote:
> When the PMC device is disabled, probing of the Tegra186 GPIO driver
> fails because the IRQ domain that is registered by the PMC driver is
> not found. The PMC IRQ domain is only used for wake-up and does not
> impact GPIO functionality in general. Therefore, if the PMC device is
> disabled, skip looking up the PMC IRQ domain to allow the GPIO driver
> to be probed.
> 
> Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
> Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
> ---
>  drivers/gpio/gpio-tegra186.c | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)

Acked-by: Thierry Reding <treding@nvidia.com>
Re: [PATCH v2] gpio: tegra186: Check PMC driver status before any request
Posted by Jon Hunter 2 years, 8 months ago 
On 07/06/2023 12:31, Prathamesh Shete wrote:
> When the PMC device is disabled, probing of the Tegra186 GPIO driver
> fails because the IRQ domain that is registered by the PMC driver is
> not found. The PMC IRQ domain is only used for wake-up and does not
> impact GPIO functionality in general. Therefore, if the PMC device is
> disabled, skip looking up the PMC IRQ domain to allow the GPIO driver
> to be probed.
> 
> Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
> Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
> ---
>   drivers/gpio/gpio-tegra186.c | 14 +++++++++-----
>   1 file changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
> index 464b0ea3b6f1..80d08ddde40e 100644
> --- a/drivers/gpio/gpio-tegra186.c
> +++ b/drivers/gpio/gpio-tegra186.c
> @@ -964,11 +964,15 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
>   
>   	np = of_find_matching_node(NULL, tegra186_pmc_of_match);
>   	if (np) {
> -		irq->parent_domain = irq_find_host(np);
> -		of_node_put(np);
> -
> -		if (!irq->parent_domain)
> -			return -EPROBE_DEFER;
> +		if (of_device_is_available(np)) {
> +			irq->parent_domain = irq_find_host(np);
> +			of_node_put(np);
> +
> +			if (!irq->parent_domain)
> +				return -EPROBE_DEFER;
> +		} else {
> +			of_node_put(np);
> +		}
>   	}
>   
>   	irq->map = devm_kcalloc(&pdev->dev, gpio->gpio.ngpio,

Thanks!

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>

Jon

-- 
nvpublic

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.