The DP output is shared with the USB3 SuperSpeed lanes and is
usually connected to an USB-C port which Altmode is controlled
by the PMIC Glink infrastructure.

DT changes tying the DP controller to the USB-C port on the QRD
board will be sent later.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v2:
- Added review tags
- s/lov_svs/low_svs/
- Applied fixes suggested from Konrad
- Link to v1: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-dp-v1-0-29efe2689553@linaro.org

---
Neil Armstrong (3):
      dt-bindings: display: msm: dp-controller: document SM8550 compatible
      arm64: dts: qcom: sm8550: fix low_svs RPMhPD labels
      arm64: dts: qcom: sm8550: add display port nodes

 .../bindings/display/msm/dp-controller.yaml        |  1 +
 arch/arm64/boot/dts/qcom/sm8550.dtsi               | 95 ++++++++++++++++++++--
 2 files changed, 91 insertions(+), 5 deletions(-)
---
base-commit: d4cee89031c80066ec461bb77b5e13a4f37d5fd2
change-id: 20230601-topic-sm8550-upstream-dp-b713ba275d7c

Best regards,
-- 
Neil Armstrong <neil.armstrong@linaro.org>

On Thu, 01 Jun 2023 12:09:46 +0200, Neil Armstrong wrote:
> The DP output is shared with the USB3 SuperSpeed lanes and is
> usually connected to an USB-C port which Altmode is controlled
> by the PMIC Glink infrastructure.
> 
> DT changes tying the DP controller to the USB-C port on the QRD
> board will be sent later.
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: display: msm: dp-controller: document SM8550 compatible
      https://gitlab.freedesktop.org/lumag/msm/-/commit/76015b9e573e

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>