1. Patchew
  2. linux
  3. [PATCH v3 0/4] arm64: dts: qcom: qdu1000: add SDHCI
  4. View patch

[PATCH v3 2/4] arm: dts: qcom: qdu1000: Add SDHCI node

Komal Bajaj posted 4 patches 2 years, 8 months ago
There is a newer version of this series
[PATCH v3 2/4] arm: dts: qcom: qdu1000: Add SDHCI node
Posted by Komal Bajaj 2 years, 8 months ago 
Add sdhc node for eMMC on QDU1000 and QRU1000 SoCs.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 47 +++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 734438113bba..6df07334f1d3 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -842,6 +842,53 @@
 			#hwlock-cells = <1>;
 		};

+		sdhc: mmc@8804000 {
+			compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x08804000 0x0 0x1000>,
+			      <0x0 0x08805000 0x0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC5_AHB_CLK>,
+				 <&gcc GCC_SDCC5_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			resets = <&gcc GCC_SDCC5_BCR>;
+
+			interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			power-domains = <&rpmhpd QDU1000_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+			dma-coherent;
+
+			bus-width = <8>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <6528000 1652800>;
+					opp-avg-kBps = <400000 0>;
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
--
2.17.1
Re: [PATCH v3 2/4] arm: dts: qcom: qdu1000: Add SDHCI node
Posted by Bjorn Andersson 2 years, 8 months ago 
On Tue, May 23, 2023 at 07:27:31PM +0530, Komal Bajaj wrote:
> Add sdhc node for eMMC on QDU1000 and QRU1000 SoCs.
> 

Please fix your $subject prefix, it should say arm64

Regards,
Bjorn

> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 47 +++++++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index 734438113bba..6df07334f1d3 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -842,6 +842,53 @@
>  			#hwlock-cells = <1>;
>  		};
> 
> +		sdhc: mmc@8804000 {
> +			compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0x0 0x08804000 0x0 0x1000>,
> +			      <0x0 0x08805000 0x0 0x1000>;
> +			reg-names = "hc", "cqhci";
> +
> +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC5_AHB_CLK>,
> +				 <&gcc GCC_SDCC5_APPS_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>;
> +			clock-names = "iface",
> +				      "core",
> +				      "xo";
> +
> +			resets = <&gcc GCC_SDCC5_BCR>;
> +
> +			interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>;
> +			interconnect-names = "sdhc-ddr", "cpu-sdhc";
> +			power-domains = <&rpmhpd QDU1000_CX>;
> +			operating-points-v2 = <&sdhc1_opp_table>;
> +
> +			iommus = <&apps_smmu 0x80 0x0>;
> +			dma-coherent;
> +
> +			bus-width = <8>;
> +
> +			qcom,dll-config = <0x0007642c>;
> +			qcom,ddr-config = <0x80040868>;
> +
> +			status = "disabled";
> +
> +			sdhc1_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-384000000 {
> +					opp-hz = /bits/ 64 <384000000>;
> +					required-opps = <&rpmhpd_opp_nom>;
> +					opp-peak-kBps = <6528000 1652800>;
> +					opp-avg-kBps = <400000 0>;
> +				};
> +			};
> +		};
> +
>  		pdc: interrupt-controller@b220000 {
>  			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
>  			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
> --
> 2.17.1
>
Re: [PATCH v3 2/4] arm: dts: qcom: qdu1000: Add SDHCI node
Posted by Komal Bajaj 2 years, 8 months ago 

On 5/25/2023 9:57 AM, Bjorn Andersson wrote:
> On Tue, May 23, 2023 at 07:27:31PM +0530, Komal Bajaj wrote:
>> Add sdhc node for eMMC on QDU1000 and QRU1000 SoCs.
>>
> Please fix your $subject prefix, it should say arm64
>
> Regards,
> Bjorn

Noted.

>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/qdu1000.dtsi | 47 +++++++++++++++++++++++++++
>>   1 file changed, 47 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> index 734438113bba..6df07334f1d3 100644
>> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> @@ -842,6 +842,53 @@
>>   			#hwlock-cells = <1>;
>>   		};
>>
>> +		sdhc: mmc@8804000 {
>> +			compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
>> +			reg = <0x0 0x08804000 0x0 0x1000>,
>> +			      <0x0 0x08805000 0x0 0x1000>;
>> +			reg-names = "hc", "cqhci";
>> +
>> +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "hc_irq", "pwr_irq";
>> +
>> +			clocks = <&gcc GCC_SDCC5_AHB_CLK>,
>> +				 <&gcc GCC_SDCC5_APPS_CLK>,
>> +				 <&rpmhcc RPMH_CXO_CLK>;
>> +			clock-names = "iface",
>> +				      "core",
>> +				      "xo";
>> +
>> +			resets = <&gcc GCC_SDCC5_BCR>;
>> +
>> +			interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
>> +					<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>;
>> +			interconnect-names = "sdhc-ddr", "cpu-sdhc";
>> +			power-domains = <&rpmhpd QDU1000_CX>;
>> +			operating-points-v2 = <&sdhc1_opp_table>;
>> +
>> +			iommus = <&apps_smmu 0x80 0x0>;
>> +			dma-coherent;
>> +
>> +			bus-width = <8>;
>> +
>> +			qcom,dll-config = <0x0007642c>;
>> +			qcom,ddr-config = <0x80040868>;
>> +
>> +			status = "disabled";
>> +
>> +			sdhc1_opp_table: opp-table {
>> +				compatible = "operating-points-v2";
>> +
>> +				opp-384000000 {
>> +					opp-hz = /bits/ 64 <384000000>;
>> +					required-opps = <&rpmhpd_opp_nom>;
>> +					opp-peak-kBps = <6528000 1652800>;
>> +					opp-avg-kBps = <400000 0>;
>> +				};
>> +			};
>> +		};
>> +
>>   		pdc: interrupt-controller@b220000 {
>>   			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
>>   			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>> --
>> 2.17.1
>>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.