changes v3:
- remove half duplex flow control configuration
- add comments
- s/stram/stream

changes v2:
- split the patch to upstrean and downstream part
- add comments
- fix downstream register offset
- fix cpu configuration

This patch set focuses on enhancing the configurability of flow
control, speed, and duplex settings in the Microchip KSZ8xxx DSA driver.

The first patch allows more granular control over the CPU port's flow
control, speed, and duplex settings. The second patch introduces a
method for downstream port configurations, primarily concerning flow
control based on duplex mode.

Oleksij Rempel (2):
  net: dsa: microchip: ksz8: Make flow control, speed, and duplex on CPU
    port configurable
  net: dsa: microchip: ksz8: Add function to configure downstream ports
    for KSZ8xxx

 drivers/net/dsa/microchip/ksz8.h       |   4 +
 drivers/net/dsa/microchip/ksz8795.c    | 131 ++++++++++++++++++++++++-
 drivers/net/dsa/microchip/ksz_common.c |   1 +
 3 files changed, 134 insertions(+), 2 deletions(-)

-- 
2.39.2

On 18.05.2023 11:29:11, Oleksij Rempel wrote:
> changes v3:
> - remove half duplex flow control configuration
> - add comments
> - s/stram/stream
> 
> changes v2:
> - split the patch to upstrean and downstream part
                              ^m
> - add comments
> - fix downstream register offset
> - fix cpu configuration
> 
> This patch set focuses on enhancing the configurability of flow
> control, speed, and duplex settings in the Microchip KSZ8xxx DSA driver.
> 
> The first patch allows more granular control over the CPU port's flow
> control, speed, and duplex settings. The second patch introduces a
> method for downstream port configurations, primarily concerning flow
> control based on duplex mode.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |