QTI RB2 features

[PATCH 0/5] QTI RB2 features

Posted by Konrad Dybcio 2 years, 8 months ago

This short series brings a couple of fixes and features
(such as display out) for the QTI RB2 board. Similar patches
for the RB1 should be expected soon.

Depends on and based atop (in order):

20230505075354.1634547-1-bhupesh.sharma@linaro.org
20230502053534.1240553-1-bhupesh.sharma@linaro.org
20230505064039.1630025-1-bhupesh.sharma@linaro.org

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Konrad Dybcio (5):
      arm64: dts: qcom: qrb4210-rb2: Describe fixed regulators
      arm64: dts: qcom: qrb4210-rb2: Enable display out
      arm64: dts: qcom: qrb4210-rb2: Add GPIO LEDs
      arm64: dts: qcom: qrb4210-rb2: Enable load setting on SDHCI VQMMC
      arm64: dts: qcom: qrb4210-rb2: Enable CAN bus controller

 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 223 ++++++++++++++++++++++++++++++-
 1 file changed, 220 insertions(+), 3 deletions(-)
---
base-commit: c768c054f1a722d4b973ddab81ee580b7e24a891
change-id: 20230515-topic-rb2-bits-22e685b4f48d

Best regards,
-- 
Konrad Dybcio <konrad.dybcio@linaro.org>

Re: [PATCH 0/5] QTI RB2 features

Posted by Bjorn Andersson 2 years, 8 months ago

On Mon, 15 May 2023 15:04:11 +0200, Konrad Dybcio wrote:
> This short series brings a couple of fixes and features
> (such as display out) for the QTI RB2 board. Similar patches
> for the RB1 should be expected soon.
> 
> Depends on and based atop (in order):
> 
> 20230505075354.1634547-1-bhupesh.sharma@linaro.org
> 20230502053534.1240553-1-bhupesh.sharma@linaro.org
> 20230505064039.1630025-1-bhupesh.sharma@linaro.org
> 
> [...]

Applied, thanks!

[1/5] arm64: dts: qcom: qrb4210-rb2: Describe fixed regulators
      commit: e130889286881e561a2904c5da44c3cbf5d5cd79
[2/5] arm64: dts: qcom: qrb4210-rb2: Enable display out
      commit: f7b01e07e89ced85975345b12cb63538ee07e91c
[3/5] arm64: dts: qcom: qrb4210-rb2: Add GPIO LEDs
      commit: fd888ed763415c31cf0ea7f044bd6cf429832f0e
[4/5] arm64: dts: qcom: qrb4210-rb2: Enable load setting on SDHCI VQMMC
      commit: 42be4edd8910a5f998a5bd993f42ea7112dd8f80
[5/5] arm64: dts: qcom: qrb4210-rb2: Enable CAN bus controller
      commit: 34a7cdf075410c30ca88c85627520dda74d3bd30

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: [PATCH 0/5] QTI RB2 features

Posted by Bhupesh Sharma 2 years, 8 months ago


On 5/15/23 6:34 PM, Konrad Dybcio wrote:
> This short series brings a couple of fixes and features
> (such as display out) for the QTI RB2 board. Similar patches
> for the RB1 should be expected soon.
> 
> Depends on and based atop (in order):
> 
> 20230505075354.1634547-1-bhupesh.sharma@linaro.org
> 20230502053534.1240553-1-bhupesh.sharma@linaro.org
> 20230505064039.1630025-1-bhupesh.sharma@linaro.org
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> Konrad Dybcio (5):
>        arm64: dts: qcom: qrb4210-rb2: Describe fixed regulators
>        arm64: dts: qcom: qrb4210-rb2: Enable display out
>        arm64: dts: qcom: qrb4210-rb2: Add GPIO LEDs
>        arm64: dts: qcom: qrb4210-rb2: Enable load setting on SDHCI VQMMC
>        arm64: dts: qcom: qrb4210-rb2: Enable CAN bus controller
> 
>   arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 223 ++++++++++++++++++++++++++++++-
>   1 file changed, 220 insertions(+), 3 deletions(-)
> ---
> base-commit: c768c054f1a722d4b973ddab81ee580b7e24a891
> change-id: 20230515-topic-rb2-bits-22e685b4f48d
> 
> Best regards,

For the series:

Reviewed-and-Tested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>

Thanks.