Add memory-region property to the tegra186-bpmp binding to support
DRAM MRQ GSCs.

Co-developed-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 .../firmware/nvidia,tegra186-bpmp.yaml        | 37 +++++++++++++++++--
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
index 833c07f1685c..f3e02c9d090d 100644
--- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
@@ -57,8 +57,11 @@ description: |
   "#address-cells" or "#size-cells" property.
 
   The shared memory area for the IPC TX and RX between CPU and BPMP are
-  predefined and work on top of sysram, which is an SRAM inside the
-  chip. See ".../sram/sram.yaml" for the bindings.
+  predefined and work on top of either sysram, which is an SRAM inside the
+  chip, or in normal SDRAM.
+  See ".../sram/sram.yaml" for the bindings for the SRAM case.
+  See "../reserved-memory/nvidia,tegra264-bpmp-shmem.yaml" for bindings for
+  the SDRAM case.
 
 properties:
   compatible:
@@ -81,6 +84,11 @@ properties:
     minItems: 2
     maxItems: 2
 
+  memory-region:
+    description: phandle to reserved memory region used for IPC between
+      CPU-NS and BPMP.
+    maxItems: 1
+
   "#clock-cells":
     const: 1
 
@@ -115,10 +123,15 @@ properties:
 
 additionalProperties: false
 
+oneOf:
+  - required:
+      - memory-region
+  - required:
+      - shmem
+
 required:
   - compatible
   - mboxes
-  - shmem
   - "#clock-cells"
   - "#power-domain-cells"
   - "#reset-cells"
@@ -184,3 +197,21 @@ examples:
             #thermal-sensor-cells = <1>;
         };
     };
+
+  - |
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+    bpmp {
+        compatible = "nvidia,tegra186-bpmp";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+        interconnect-names = "read", "write", "dma-mem", "dma-write";
+        mboxes = <&hsp_top1 TEGRA_HSP_MBOX_TYPE_DB
+                            TEGRA_HSP_DB_MASTER_BPMP>;
+        memory-region = <&dram_cpu_bpmp_mail>;
+        #clock-cells = <1>;
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+    };
-- 
2.34.1

On Wed, May 10, 2023 at 02:31:34PM +0300, Peter De Schrijver wrote:
> Add memory-region property to the tegra186-bpmp binding to support
> DRAM MRQ GSCs.
> 
> Co-developed-by: Stefan Kristiansson <stefank@nvidia.com>
> Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
> ---
>  .../firmware/nvidia,tegra186-bpmp.yaml        | 37 +++++++++++++++++--
>  1 file changed, 34 insertions(+), 3 deletions(-)

We usually use a longer subject prefix, even though that makes the whole
subject usually become longer than the recommended 50 (or so)
characters.

Maybe you also want to add a verb to the subject to make it more
descriptive. As it is the subject doesn't indicate what's happening with
the memory-region property. It could equally well get removed.

Thierry