1. Patchew
  2. linux
  3. View series

[PATCH v2] soc: qcom: ocmem: Add OCMEM hardware version print

Luca Weiss posted 1 patch 2 years, 8 months ago
There is a newer version of this series
drivers/soc/qcom/ocmem.c | 9 +++++++++
1 file changed, 9 insertions(+)
[PATCH v2] soc: qcom: ocmem: Add OCMEM hardware version print
Posted by Luca Weiss 2 years, 8 months ago 
It might be useful to know what hardware version of the OCMEM block the
SoC contains. Add a debug print for that.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
This patch is depends on [0] but could also be applied in the other
order, if conflicts are resolved.

[0] https://lore.kernel.org/linux-arm-msm/20230506-msm8226-ocmem-v1-1-3e24e2724f01@z3ntu.xyz/
---
Changes in v2:
- Use FIELD_GET macros for getting correct bits from register (take
  wording from mdp5: major, minor, step which hopefully is sort of
  accurate)
- Link to v1: https://lore.kernel.org/r/20230509-ocmem-hwver-v1-1-b83ece3f2168@z3ntu.xyz
---
 drivers/soc/qcom/ocmem.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/soc/qcom/ocmem.c b/drivers/soc/qcom/ocmem.c
index c3e78411c637..9f7c3348cbb9 100644
--- a/drivers/soc/qcom/ocmem.c
+++ b/drivers/soc/qcom/ocmem.c
@@ -76,6 +76,10 @@ struct ocmem {
 #define OCMEM_REG_GFX_MPU_START			0x00001004
 #define OCMEM_REG_GFX_MPU_END			0x00001008
 
+#define OCMEM_HW_VERSION_MAJOR(val)		FIELD_GET(GENMASK(31, 28), val)
+#define OCMEM_HW_VERSION_MINOR(val)		FIELD_GET(GENMASK(27, 16), val)
+#define OCMEM_HW_VERSION_STEP(val)		FIELD_GET(GENMASK(15, 0), val)
+
 #define OCMEM_HW_PROFILE_NUM_PORTS(val)		FIELD_GET(0x0000000f, (val))
 #define OCMEM_HW_PROFILE_NUM_MACROS(val)	FIELD_GET(0x00003f00, (val))
 
@@ -355,6 +359,11 @@ static int ocmem_dev_probe(struct platform_device *pdev)
 		}
 	}
 
+	reg = ocmem_read(ocmem, OCMEM_REG_HW_VERSION);
+	dev_dbg(dev, "OCMEM hardware version: %ld.%ld.%ld\n",
+		OCMEM_HW_VERSION_MAJOR(reg), OCMEM_HW_VERSION_MINOR(reg),
+		OCMEM_HW_VERSION_STEP(reg));
+
 	reg = ocmem_read(ocmem, OCMEM_REG_HW_PROFILE);
 	ocmem->num_ports = OCMEM_HW_PROFILE_NUM_PORTS(reg);
 	ocmem->num_macros = OCMEM_HW_PROFILE_NUM_MACROS(reg);

---
base-commit: 8705151771af822ac794b44504cd72eebc423499
change-id: 20230509-ocmem-hwver-99bcb33b028b

Best regards,
-- 
Luca Weiss <luca@z3ntu.xyz>
Re: [PATCH v2] soc: qcom: ocmem: Add OCMEM hardware version print
Posted by Konrad Dybcio 2 years, 8 months ago 

On 23.05.2023 22:32, Luca Weiss wrote:
> It might be useful to know what hardware version of the OCMEM block the
> SoC contains. Add a debug print for that.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> This patch is depends on [0] but could also be applied in the other
> order, if conflicts are resolved.
> 
> [0] https://lore.kernel.org/linux-arm-msm/20230506-msm8226-ocmem-v1-1-3e24e2724f01@z3ntu.xyz/
> ---
> Changes in v2:
> - Use FIELD_GET macros for getting correct bits from register (take
>   wording from mdp5: major, minor, step which hopefully is sort of
>   accurate)
Qualcomm uses that (or that-ish) nomenclature for many hw blocks, so
it's likely spot on.

> - Link to v1: https://lore.kernel.org/r/20230509-ocmem-hwver-v1-1-b83ece3f2168@z3ntu.xyz
> ---
>  drivers/soc/qcom/ocmem.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/soc/qcom/ocmem.c b/drivers/soc/qcom/ocmem.c
> index c3e78411c637..9f7c3348cbb9 100644
> --- a/drivers/soc/qcom/ocmem.c
> +++ b/drivers/soc/qcom/ocmem.c
> @@ -76,6 +76,10 @@ struct ocmem {
>  #define OCMEM_REG_GFX_MPU_START			0x00001004
>  #define OCMEM_REG_GFX_MPU_END			0x00001008
>  
> +#define OCMEM_HW_VERSION_MAJOR(val)		FIELD_GET(GENMASK(31, 28), val)
> +#define OCMEM_HW_VERSION_MINOR(val)		FIELD_GET(GENMASK(27, 16), val)
> +#define OCMEM_HW_VERSION_STEP(val)		FIELD_GET(GENMASK(15, 0), val)
> +
>  #define OCMEM_HW_PROFILE_NUM_PORTS(val)		FIELD_GET(0x0000000f, (val))
>  #define OCMEM_HW_PROFILE_NUM_MACROS(val)	FIELD_GET(0x00003f00, (val))
>  
> @@ -355,6 +359,11 @@ static int ocmem_dev_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	reg = ocmem_read(ocmem, OCMEM_REG_HW_VERSION);
> +	dev_dbg(dev, "OCMEM hardware version: %ld.%ld.%ld\n",
reg is an unsigned long (u32), this should probably be %u

> +		OCMEM_HW_VERSION_MAJOR(reg), OCMEM_HW_VERSION_MINOR(reg),
> +		OCMEM_HW_VERSION_STEP(reg));
Nit: one per line would make this the tiniest bit easier to read

Konrad
> +
>  	reg = ocmem_read(ocmem, OCMEM_REG_HW_PROFILE);
>  	ocmem->num_ports = OCMEM_HW_PROFILE_NUM_PORTS(reg);
>  	ocmem->num_macros = OCMEM_HW_PROFILE_NUM_MACROS(reg);
> 
> ---
> base-commit: 8705151771af822ac794b44504cd72eebc423499
> change-id: 20230509-ocmem-hwver-99bcb33b028b
> 
> Best regards,
Re: [PATCH v2] soc: qcom: ocmem: Add OCMEM hardware version print
Posted by Luca Weiss 2 years, 8 months ago 
On Freitag, 26. Mai 2023 21:39:44 CEST Konrad Dybcio wrote:
> On 23.05.2023 22:32, Luca Weiss wrote:
> > It might be useful to know what hardware version of the OCMEM block the
> > SoC contains. Add a debug print for that.
> > 
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> > This patch is depends on [0] but could also be applied in the other
> > order, if conflicts are resolved.
> > 
> > [0]
> > https://lore.kernel.org/linux-arm-msm/20230506-msm8226-ocmem-v1-1-3e24e27
> > 24f01@z3ntu.xyz/ ---
> > Changes in v2:
> > - Use FIELD_GET macros for getting correct bits from register (take
> > 
> >   wording from mdp5: major, minor, step which hopefully is sort of
> >   accurate)
> 
> Qualcomm uses that (or that-ish) nomenclature for many hw blocks, so
> it's likely spot on.
> 
> > - Link to v1:
> > https://lore.kernel.org/r/20230509-ocmem-hwver-v1-1-b83ece3f2168@z3ntu.xy
> > z ---
> > 
> >  drivers/soc/qcom/ocmem.c | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> > 
> > diff --git a/drivers/soc/qcom/ocmem.c b/drivers/soc/qcom/ocmem.c
> > index c3e78411c637..9f7c3348cbb9 100644
> > --- a/drivers/soc/qcom/ocmem.c
> > +++ b/drivers/soc/qcom/ocmem.c
> > @@ -76,6 +76,10 @@ struct ocmem {
> > 
> >  #define OCMEM_REG_GFX_MPU_START			0x00001004
> >  #define OCMEM_REG_GFX_MPU_END			0x00001008
> > 
> > +#define OCMEM_HW_VERSION_MAJOR(val)		FIELD_GET(GENMASK(31, 28), val)
> > +#define OCMEM_HW_VERSION_MINOR(val)		FIELD_GET(GENMASK(27, 16), val)
> > +#define OCMEM_HW_VERSION_STEP(val)		FIELD_GET(GENMASK(15, 0), val)
> > +
> > 
> >  #define OCMEM_HW_PROFILE_NUM_PORTS(val)		FIELD_GET(0x0000000f, (val))
> >  #define OCMEM_HW_PROFILE_NUM_MACROS(val)	FIELD_GET(0x00003f00, (val))
> > 
> > @@ -355,6 +359,11 @@ static int ocmem_dev_probe(struct platform_device
> > *pdev)> 
> >  		}
> >  	
> >  	}
> > 
> > +	reg = ocmem_read(ocmem, OCMEM_REG_HW_VERSION);
> > +	dev_dbg(dev, "OCMEM hardware version: %ld.%ld.%ld\n",
> 
> reg is an unsigned long (u32), this should probably be %u

I can make it %lu, just %u gives me this warning

drivers/soc/qcom/ocmem.c:363:22: warning: format '%u' expects argument of type 'unsigned int', but argument 6 has type 'long unsigned int' [-Wformat=]
  363 |         dev_dbg(dev, "OCMEM hardware version: %u.%u.%u\n",
      |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


Will send a v3 with that.

> 
> > +		OCMEM_HW_VERSION_MAJOR(reg), OCMEM_HW_VERSION_MINOR(reg),
> > +		OCMEM_HW_VERSION_STEP(reg));
> 
> Nit: one per line would make this the tiniest bit easier to read

ack

Regards
Luca

> 
> Konrad
> 
> > +
> > 
> >  	reg = ocmem_read(ocmem, OCMEM_REG_HW_PROFILE);
> >  	ocmem->num_ports = OCMEM_HW_PROFILE_NUM_PORTS(reg);
> >  	ocmem->num_macros = OCMEM_HW_PROFILE_NUM_MACROS(reg);
> > 
> > ---
> > base-commit: 8705151771af822ac794b44504cd72eebc423499
> > change-id: 20230509-ocmem-hwver-99bcb33b028b
> > 
> > Best regards,
Re: [PATCH v2] soc: qcom: ocmem: Add OCMEM hardware version print
Posted by Konrad Dybcio 2 years, 8 months ago 

On 29.05.2023 10:38, Luca Weiss wrote:
> On Freitag, 26. Mai 2023 21:39:44 CEST Konrad Dybcio wrote:
>> On 23.05.2023 22:32, Luca Weiss wrote:
>>> It might be useful to know what hardware version of the OCMEM block the
>>> SoC contains. Add a debug print for that.
>>>
>>> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
>>> ---
>>> This patch is depends on [0] but could also be applied in the other
>>> order, if conflicts are resolved.
>>>
>>> [0]
>>> https://lore.kernel.org/linux-arm-msm/20230506-msm8226-ocmem-v1-1-3e24e27
>>> 24f01@z3ntu.xyz/ ---
>>> Changes in v2:
>>> - Use FIELD_GET macros for getting correct bits from register (take
>>>
>>>   wording from mdp5: major, minor, step which hopefully is sort of
>>>   accurate)
>>
>> Qualcomm uses that (or that-ish) nomenclature for many hw blocks, so
>> it's likely spot on.
>>
>>> - Link to v1:
>>> https://lore.kernel.org/r/20230509-ocmem-hwver-v1-1-b83ece3f2168@z3ntu.xy
>>> z ---
>>>
>>>  drivers/soc/qcom/ocmem.c | 9 +++++++++
>>>  1 file changed, 9 insertions(+)
>>>
>>> diff --git a/drivers/soc/qcom/ocmem.c b/drivers/soc/qcom/ocmem.c
>>> index c3e78411c637..9f7c3348cbb9 100644
>>> --- a/drivers/soc/qcom/ocmem.c
>>> +++ b/drivers/soc/qcom/ocmem.c
>>> @@ -76,6 +76,10 @@ struct ocmem {
>>>
>>>  #define OCMEM_REG_GFX_MPU_START			0x00001004
>>>  #define OCMEM_REG_GFX_MPU_END			0x00001008
>>>
>>> +#define OCMEM_HW_VERSION_MAJOR(val)		FIELD_GET(GENMASK(31, 28), val)
>>> +#define OCMEM_HW_VERSION_MINOR(val)		FIELD_GET(GENMASK(27, 16), val)
>>> +#define OCMEM_HW_VERSION_STEP(val)		FIELD_GET(GENMASK(15, 0), val)
>>> +
>>>
>>>  #define OCMEM_HW_PROFILE_NUM_PORTS(val)		FIELD_GET(0x0000000f, (val))
>>>  #define OCMEM_HW_PROFILE_NUM_MACROS(val)	FIELD_GET(0x00003f00, (val))
>>>
>>> @@ -355,6 +359,11 @@ static int ocmem_dev_probe(struct platform_device
>>> *pdev)> 
>>>  		}
>>>  	
>>>  	}
>>>
>>> +	reg = ocmem_read(ocmem, OCMEM_REG_HW_VERSION);
>>> +	dev_dbg(dev, "OCMEM hardware version: %ld.%ld.%ld\n",
>>
>> reg is an unsigned long (u32), this should probably be %u
> 
> I can make it %lu, just %u gives me this warning
Right, grumpy compilers care about types that have been meaningless for
longer than I've been alive.. 

Konrad
> 
> drivers/soc/qcom/ocmem.c:363:22: warning: format '%u' expects argument of type 'unsigned int', but argument 6 has type 'long unsigned int' [-Wformat=]
>   363 |         dev_dbg(dev, "OCMEM hardware version: %u.%u.%u\n",
>       |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> 
> Will send a v3 with that.
> 
>>
>>> +		OCMEM_HW_VERSION_MAJOR(reg), OCMEM_HW_VERSION_MINOR(reg),
>>> +		OCMEM_HW_VERSION_STEP(reg));
>>
>> Nit: one per line would make this the tiniest bit easier to read
> 
> ack
> 
> Regards
> Luca
> 
>>
>> Konrad
>>
>>> +
>>>
>>>  	reg = ocmem_read(ocmem, OCMEM_REG_HW_PROFILE);
>>>  	ocmem->num_ports = OCMEM_HW_PROFILE_NUM_PORTS(reg);
>>>  	ocmem->num_macros = OCMEM_HW_PROFILE_NUM_MACROS(reg);
>>>
>>> ---
>>> base-commit: 8705151771af822ac794b44504cd72eebc423499
>>> change-id: 20230509-ocmem-hwver-99bcb33b028b
>>>
>>> Best regards,
> 
> 
> 
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.