Define clock/clock-names properties of the MMCC device node to be used
on MSM8226 platform.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 .../devicetree/bindings/clock/qcom,mmcc.yaml       | 32 ++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index acf0c923c24f..422f5776a771 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -31,11 +31,11 @@ properties:
       - qcom,mmcc-sdm660
 
   clocks:
-    minItems: 8
+    minItems: 7
     maxItems: 13
 
   clock-names:
-    minItems: 8
+    minItems: 7
     maxItems: 13
 
   '#clock-cells':
@@ -99,6 +99,34 @@ allOf:
             - const: dsi2pllbyte
             - const: hdmipll
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8226
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 voted clock
+            - description: GFX3D clock source
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: mmss_gpll0_vote
+            - const: gpll0_vote
+            - const: gpll1_vote
+            - const: gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+
   - if:
       properties:
         compatible:

-- 
2.40.1

On 5/9/2023 3:16 PM, Luca Weiss wrote:
> Define clock/clock-names properties of the MMCC device node to be used
> on MSM8226 platform.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

On 09/05/2023 23:16, Luca Weiss wrote:
> Define clock/clock-names properties of the MMCC device node to be used
> on MSM8226 platform.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof