From: Johannes Schneider <johannes.schneider@leica-geosystems.com>

Add DT compatible for the imx8mm EVKB [1].

[1] https://www.nxp.com/design/development-boards/ \
	i-mx-evaluation-and-development-boards/ \
	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
[m.felsch@pengutronix.de: Adapt the commit message]
[m.felsch@pengutronix.de: Adapt the yaml comment]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 442ce8f4d675..446f71b7b798 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -887,6 +887,7 @@ properties:
               - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - fsl,imx8mm-evkb           # i.MX8MM EVKB Board
               - gateworks,imx8mm-gw7904
               - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit

-- 
2.39.2

On 03/05/2023 17:20, Marco Felsch wrote:
> From: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> 
> Add DT compatible for the imx8mm EVKB [1].
> 
> [1] https://www.nxp.com/design/development-boards/ \
> 	i-mx-evaluation-and-development-boards/ \
> 	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK
> 
> Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> [m.felsch@pengutronix.de: Adapt the commit message]
> [m.felsch@pengutronix.de: Adapt the yaml comment]

I don't see any differences. The comment is exactly the same as before.

This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions. However, there's no need to repost patches *only* to add the
tags. The upstream maintainer will do that for acks received on the
version they apply.

https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540

If a tag was not added on purpose, please state why and what changed.


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

On 23-05-03, Krzysztof Kozlowski wrote:
> On 03/05/2023 17:20, Marco Felsch wrote:
> > From: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> > 
> > Add DT compatible for the imx8mm EVKB [1].
> > 
> > [1] https://www.nxp.com/design/development-boards/ \
> > 	i-mx-evaluation-and-development-boards/ \
> > 	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK
> > 
> > Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> > [m.felsch@pengutronix.de: Adapt the commit message]
> > [m.felsch@pengutronix.de: Adapt the yaml comment]
> 
> I don't see any differences. The comment is exactly the same as before.

I fogot to say that I used V8 as base which caused problems on Shawns
side and there was a difference.

> This is a friendly reminder during the review process.
> 
> It looks like you received a tag and forgot to add it.
> 
> If you do not know the process, here is a short explanation:
> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
> versions. However, there's no need to repost patches *only* to add the
> tags. The upstream maintainer will do that for acks received on the
> version they apply.
> 
> https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540
> 
> If a tag was not added on purpose, please state why and what changed.

As said above..

Regards,
  Marco

> 
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Best regards,
> Krzysztof
> 
> 
>