Hi,

I picked the patch series from Johannes [1] and reworked it according
the comments and the discussion.

@Krzysztof
I dropped your ack for the bindings since I adapted the comment within
this oneliner. Please can you check the current state and provide your
(n)ack again?

[1] https://lore.kernel.org/all/20230130172553.2738182-1-johannes.schneider@leica-geosystems.com/

---
Johannes Schneider (2):
      dt-bindings: arm: fsl: Add i.MX8MM-EVKB
      arm64: dts: add NXP i.MX8MM-EVKB support

 Documentation/devicetree/bindings/arm/fsl.yaml |   1 +
 arch/arm64/boot/dts/freescale/Makefile         |   1 +
 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts  | 128 +++++++++++++++++++++++++
 3 files changed, 130 insertions(+)
---
base-commit: 457391b0380335d5e9a5babdec90ac53928b23b4
change-id: 20230503-b4-v6-3-topic-boards-imx8mm-evk-94e79a9062ab

Best regards,
-- 
Marco Felsch <m.felsch@pengutronix.de>

On Wed, May 03, 2023 at 05:20:03PM +0200, Marco Felsch wrote:
> Hi,
> 
> I picked the patch series from Johannes [1] and reworked it according
> the comments and the discussion.
> 
> @Krzysztof
> I dropped your ack for the bindings since I adapted the comment within
> this oneliner. Please can you check the current state and provide your
> (n)ack again?
> 
> [1] https://lore.kernel.org/all/20230130172553.2738182-1-johannes.schneider@leica-geosystems.com/
> 
> ---
> Johannes Schneider (2):
>       dt-bindings: arm: fsl: Add i.MX8MM-EVKB
>       arm64: dts: add NXP i.MX8MM-EVKB support

Applied both, thanks!