This series adds basic support for TI's TPS62870/TPS62871/TPS62872/
TPS62873 high-frequency single-channel step-down converters with an
I2C interface.

The devices can operate in power save mode for maximum efficiency, or
forced-PWM mode for best transient performance and lowest output
voltage ripple. All chip variants have four output voltage ranges and
the driver changes active range depending on the requested voltage
setting.

There are differences in the electrical characteristics and packaging
between the variants, but the register interfaces are identical.

Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
---
Changes in v3:
- dt-bindings: Changed subject prefix "regulator:" => "regulator: dt-bindings:".
- dt-bindings: Dropped 'regulators' and 'vout' nodes.
- dt-bindings: Added description for regulator-initial-mode.
- Call of_get_regulator_init_data to read the regulation constraints from driver probe.
- Drop local get/set voltage functions and use helper functions get/set/list_pickable_regmap
  with linear_ranges/linear_range_selectors mappings instead.
- Link to v2: https://lore.kernel.org/r/20230502-tps6287x-driver-v2-0-fb5419d46c49@axis.com

Changes in v2:
- No changes. v2 was v1

---
Mårten Lindahl (2):
      regulator: dt-bindings: Add bindings for TPS6287x
      regulator: Add support for TI TPS6287x regulators

 .../devicetree/bindings/regulator/ti,tps62870.yaml |  52 ++++++
 drivers/regulator/Kconfig                          |  11 ++
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/tps6287x-regulator.c             | 188 +++++++++++++++++++++
 4 files changed, 252 insertions(+)
---
base-commit: 457391b0380335d5e9a5babdec90ac53928b23b4
change-id: 20230502-tps6287x-driver-af1474b3111e

Best regards,
-- 
Mårten Lindahl <marten.lindahl@axis.com>

On Mon, 08 May 2023 15:14:06 +0200, Mårten Lindahl wrote:
> This series adds basic support for TI's TPS62870/TPS62871/TPS62872/
> TPS62873 high-frequency single-channel step-down converters with an
> I2C interface.
> 
> The devices can operate in power save mode for maximum efficiency, or
> forced-PWM mode for best transient performance and lowest output
> voltage ripple. All chip variants have four output voltage ranges and
> the driver changes active range depending on the requested voltage
> setting.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/2] regulator: dt-bindings: Add bindings for TPS6287x
      commit: 034008dd227877cca1588d66e2df505f5fae26c9
[2/2] regulator: Add support for TI TPS6287x regulators
      commit: 7b0518fbf2befd7c4afb81eb06c95c8fc93998be

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark