Add the default and sleep pinctrl states for SDHC1 & 2 controllers
on QRB4210 RB2 board.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index dc80f0bca767..5a5294cc6e45 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -190,6 +190,10 @@ vreg_l24a_2p96: l24 {
 };
 
 &sdhc_1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+
 	vmmc-supply = <&vreg_l24a_2p96>;
 	vqmmc-supply = <&vreg_l11a_1p8>;
 	no-sdio;
@@ -200,6 +204,10 @@ &sdhc_1 {
 
 &sdhc_2 {
 	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
+
 	vmmc-supply = <&vreg_l22a_2p96>;
 	vqmmc-supply = <&vreg_l5a_2p96>;
 	no-sdio;
@@ -216,6 +224,13 @@ &tlmm {
 			       <49 1>, <52 1>, <54 1>,
 			       <56 3>, <61 2>, <64 1>,
 			       <68 1>, <72 8>, <96 1>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &uart4 {
-- 
2.38.1

On 1.05.2023 12:58, Bhupesh Sharma wrote:
> Add the default and sleep pinctrl states for SDHC1 & 2 controllers
> on QRB4210 RB2 board.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> index dc80f0bca767..5a5294cc6e45 100644
> --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> @@ -190,6 +190,10 @@ vreg_l24a_2p96: l24 {
>  };
>  
>  &sdhc_1 {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&sdc1_state_on>;
> +	pinctrl-1 = <&sdc1_state_off>;
property-n
property-names

Other than that:
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> +
>  	vmmc-supply = <&vreg_l24a_2p96>;
>  	vqmmc-supply = <&vreg_l11a_1p8>;
>  	no-sdio;
> @@ -200,6 +204,10 @@ &sdhc_1 {
>  
>  &sdhc_2 {
>  	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
> +	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
> +
>  	vmmc-supply = <&vreg_l22a_2p96>;
>  	vqmmc-supply = <&vreg_l5a_2p96>;
>  	no-sdio;
> @@ -216,6 +224,13 @@ &tlmm {
>  			       <49 1>, <52 1>, <54 1>,
>  			       <56 3>, <61 2>, <64 1>,
>  			       <68 1>, <72 8>, <96 1>;
> +
> +	sdc2_card_det_n: sd-card-det-n-state {
> +		pins = "gpio88";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-pull-up;
> +	};
>  };
>  
>  &uart4 {

On Tue, 2 May 2023 at 17:27, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> On 1.05.2023 12:58, Bhupesh Sharma wrote:
> > Add the default and sleep pinctrl states for SDHC1 & 2 controllers
> > on QRB4210 RB2 board.
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 15 +++++++++++++++
> >  1 file changed, 15 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > index dc80f0bca767..5a5294cc6e45 100644
> > --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > @@ -190,6 +190,10 @@ vreg_l24a_2p96: l24 {
> >  };
> >
> >  &sdhc_1 {
> > +     pinctrl-names = "default", "sleep";
> > +     pinctrl-0 = <&sdc1_state_on>;
> > +     pinctrl-1 = <&sdc1_state_off>;
> property-n
> property-names
>
> Other than that:
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Sure, let me fix this in v3.

Thanks,
Bhupesh

On 01/05/2023 12:58, Bhupesh Sharma wrote:
> Add the default and sleep pinctrl states for SDHC1 & 2 controllers
> on QRB4210 RB2 board.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof