From: Arınç ÜNAL <arinc.unal@arinc9.com>
Introduce the p5_sgmii pointer to store the information for whether port 5
has got SGMII or not. Print "found MT7531AE" if it's got it, print "found
MT7531BE" if it hasn't.
Move the comment about MT7531AE and MT7531BE to mt7531_setup(), where the
switch is identified.
Get rid of mt7531_dual_sgmii_supported() now that priv->p5_sgmii stores the
information. Address the code where mt7531_dual_sgmii_supported() is used.
Get rid of mt7531_is_rgmii_port() which just prints the opposite of
priv->p5_sgmii.
Remove P5_INTF_SEL_GMAC5_SGMII. The p5_interface_select enum is supposed to
represent the mode that port 5 is used in, not the hardware information of
port 5. Set p5_intf_sel to P5_INTF_SEL_GMAC5 instead, if port 5 is not
dsa_is_unused_port().
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530-mdio.c | 7 ++---
drivers/net/dsa/mt7530.c | 49 +++++++++++++++--------------------
drivers/net/dsa/mt7530.h | 6 +++--
3 files changed, 27 insertions(+), 35 deletions(-)
diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c
index 088533663b83..fa3ee85a99c1 100644
--- a/drivers/net/dsa/mt7530-mdio.c
+++ b/drivers/net/dsa/mt7530-mdio.c
@@ -81,17 +81,14 @@ static const struct regmap_bus mt7530_regmap_bus = {
};
static int
-mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii)
+mt7531_create_sgmii(struct mt7530_priv *priv)
{
struct regmap_config *mt7531_pcs_config[2] = {};
struct phylink_pcs *pcs;
struct regmap *regmap;
int i, ret = 0;
- /* MT7531AE has two SGMII units for port 5 and port 6
- * MT7531BE has only one SGMII unit for port 6
- */
- for (i = dual_sgmii ? 0 : 1; i < 2; i++) {
+ for (i = priv->p5_sgmii ? 0 : 1; i < 2; i++) {
mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
sizeof(struct regmap_config),
GFP_KERNEL);
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index c680873819b0..edc34be745b2 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -473,15 +473,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
return 0;
}
-static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv)
-{
- u32 val;
-
- val = mt7530_read(priv, MT7531_TOP_SIG_SR);
-
- return (val & PAD_DUAL_SGMII_EN) != 0;
-}
-
static int
mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
{
@@ -496,7 +487,7 @@ mt7531_pll_setup(struct mt7530_priv *priv)
u32 xtal;
u32 val;
- if (mt7531_dual_sgmii_supported(priv))
+ if (priv->p5_sgmii)
return;
val = mt7530_read(priv, MT7531_CREV);
@@ -907,8 +898,6 @@ static const char *p5_intf_modes(unsigned int p5_interface)
return "PHY P4";
case P5_INTF_SEL_GMAC5:
return "GMAC5";
- case P5_INTF_SEL_GMAC5_SGMII:
- return "GMAC5_SGMII";
default:
return "unknown";
}
@@ -2440,6 +2429,18 @@ mt7531_setup(struct dsa_switch *ds)
return -ENODEV;
}
+ /* MT7531AE has got two SGMII units. One for port 5, one for port 6.
+ * MT7531BE has got only one SGMII unit which is for port 6.
+ */
+ val = mt7530_read(priv, MT7531_TOP_SIG_SR);
+
+ if ((val & PAD_DUAL_SGMII_EN) != 0) {
+ priv->p5_sgmii = true;
+ dev_info(priv->dev, "found MT7531AE\n");
+ } else {
+ dev_info(priv->dev, "found MT7531BE\n");
+ }
+
/* all MACs must be forced link-down before sw reset */
for (i = 0; i < MT7530_NUM_PORTS; i++)
mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
@@ -2451,19 +2452,16 @@ mt7531_setup(struct dsa_switch *ds)
mt7531_pll_setup(priv);
- if (mt7531_dual_sgmii_supported(priv)) {
- priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII;
-
+ if (priv->p5_sgmii) {
/* Let ds->slave_mii_bus be able to access external phy. */
mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
MT7531_EXT_P_MDC_11);
mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
MT7531_EXT_P_MDIO_12);
- } else {
- priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
}
- dev_dbg(ds->dev, "P5 support %s interface\n",
- p5_intf_modes(priv->p5_intf_sel));
+
+ if (!dsa_is_unused_port(ds, 5))
+ priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
MT7531_GPIO0_INTERRUPT);
@@ -2523,11 +2521,6 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
}
}
-static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
-{
- return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
-}
-
static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
@@ -2540,7 +2533,7 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
break;
case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
- if (mt7531_is_rgmii_port(priv, port)) {
+ if (!priv->p5_sgmii) {
phy_interface_set_rgmii(config->supported_interfaces);
break;
}
@@ -2607,7 +2600,7 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
{
u32 val;
- if (!mt7531_is_rgmii_port(priv, port)) {
+ if (priv->p5_sgmii) {
dev_err(priv->dev, "RGMII mode is not available for port %d\n",
port);
return -EINVAL;
@@ -2860,7 +2853,7 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
switch (port) {
case 5:
- if (mt7531_is_rgmii_port(priv, port))
+ if (!priv->p5_sgmii)
interface = PHY_INTERFACE_MODE_RGMII;
else
interface = PHY_INTERFACE_MODE_2500BASEX;
@@ -3019,7 +3012,7 @@ mt753x_setup(struct dsa_switch *ds)
mt7530_free_irq_common(priv);
if (priv->create_sgmii) {
- ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv));
+ ret = priv->create_sgmii(priv);
if (ret && priv->irq)
mt7530_free_irq(priv);
}
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 703f8a528317..f58828577520 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -679,7 +679,6 @@ typedef enum {
P5_INTF_SEL_PHY_P0,
P5_INTF_SEL_PHY_P4,
P5_INTF_SEL_GMAC5,
- P5_INTF_SEL_GMAC5_SGMII,
} p5_interface_select;
struct mt7530_priv;
@@ -749,6 +748,8 @@ struct mt753x_info {
* @p6_interface: Holding the current port 6 interface
* @p5_interface: Holding the current port 5 interface
* @p5_intf_sel: Holding the current port 5 interface select
+ * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch
+ * has got SGMII
* @irq: IRQ number of the switch
* @irq_domain: IRQ domain of the switch irq_chip
* @irq_enable: IRQ enable bits, synced to SYS_INT_EN
@@ -769,6 +770,7 @@ struct mt7530_priv {
phy_interface_t p6_interface;
phy_interface_t p5_interface;
p5_interface_select p5_intf_sel;
+ bool p5_sgmii;
u8 mirror_rx;
u8 mirror_tx;
struct mt7530_port ports[MT7530_NUM_PORTS];
@@ -778,7 +780,7 @@ struct mt7530_priv {
int irq;
struct irq_domain *irq_domain;
u32 irq_enable;
- int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
+ int (*create_sgmii)(struct mt7530_priv *priv);
};
struct mt7530_hw_vlan_entry {
--
2.37.2
On Fri, Apr 21, 2023 at 05:36:29PM +0300, arinc9.unal@gmail.com wrote: > From: Arınç ÜNAL <arinc.unal@arinc9.com> > > Introduce the p5_sgmii pointer to store the information for whether port 5 > has got SGMII or not. Print "found MT7531AE" if it's got it, print "found > MT7531BE" if it hasn't. > > Move the comment about MT7531AE and MT7531BE to mt7531_setup(), where the > switch is identified. > > Get rid of mt7531_dual_sgmii_supported() now that priv->p5_sgmii stores the > information. Address the code where mt7531_dual_sgmii_supported() is used. > > Get rid of mt7531_is_rgmii_port() which just prints the opposite of > priv->p5_sgmii. > > Remove P5_INTF_SEL_GMAC5_SGMII. The p5_interface_select enum is supposed to > represent the mode that port 5 is used in, not the hardware information of > port 5. Set p5_intf_sel to P5_INTF_SEL_GMAC5 instead, if port 5 is not > dsa_is_unused_port(). > > Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> > --- > drivers/net/dsa/mt7530-mdio.c | 7 ++--- > drivers/net/dsa/mt7530.c | 49 +++++++++++++++-------------------- > drivers/net/dsa/mt7530.h | 6 +++-- > 3 files changed, 27 insertions(+), 35 deletions(-) > > diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c > index 088533663b83..fa3ee85a99c1 100644 > --- a/drivers/net/dsa/mt7530-mdio.c > +++ b/drivers/net/dsa/mt7530-mdio.c > @@ -81,17 +81,14 @@ static const struct regmap_bus mt7530_regmap_bus = { > }; > > static int > -mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii) > +mt7531_create_sgmii(struct mt7530_priv *priv) > { > struct regmap_config *mt7531_pcs_config[2] = {}; > struct phylink_pcs *pcs; > struct regmap *regmap; > int i, ret = 0; > > - /* MT7531AE has two SGMII units for port 5 and port 6 > - * MT7531BE has only one SGMII unit for port 6 > - */ > - for (i = dual_sgmii ? 0 : 1; i < 2; i++) { > + for (i = priv->p5_sgmii ? 0 : 1; i < 2; i++) { > mt7531_pcs_config[i] = devm_kzalloc(priv->dev, > sizeof(struct regmap_config), > GFP_KERNEL); > diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c > index c680873819b0..edc34be745b2 100644 > --- a/drivers/net/dsa/mt7530.c > +++ b/drivers/net/dsa/mt7530.c > @@ -473,15 +473,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) > return 0; > } > > -static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) > -{ > - u32 val; > - > - val = mt7530_read(priv, MT7531_TOP_SIG_SR); > - > - return (val & PAD_DUAL_SGMII_EN) != 0; > -} > - > static int > mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) > { > @@ -496,7 +487,7 @@ mt7531_pll_setup(struct mt7530_priv *priv) > u32 xtal; > u32 val; > > - if (mt7531_dual_sgmii_supported(priv)) > + if (priv->p5_sgmii) > return; > > val = mt7530_read(priv, MT7531_CREV); > @@ -907,8 +898,6 @@ static const char *p5_intf_modes(unsigned int p5_interface) > return "PHY P4"; > case P5_INTF_SEL_GMAC5: > return "GMAC5"; > - case P5_INTF_SEL_GMAC5_SGMII: > - return "GMAC5_SGMII"; > default: > return "unknown"; > } > @@ -2440,6 +2429,18 @@ mt7531_setup(struct dsa_switch *ds) > return -ENODEV; > } > > + /* MT7531AE has got two SGMII units. One for port 5, one for port 6. > + * MT7531BE has got only one SGMII unit which is for port 6. > + */ > + val = mt7530_read(priv, MT7531_TOP_SIG_SR); > + > + if ((val & PAD_DUAL_SGMII_EN) != 0) { > + priv->p5_sgmii = true; > + dev_info(priv->dev, "found MT7531AE\n"); > + } else { > + dev_info(priv->dev, "found MT7531BE\n"); I don't think dev_info is useful here for regular users. If you really want this output, use dev_dbg to reduce log pollution. Imho completely removing the else branch and only silently setting priv->p5_sgmii is sufficient, as users can also turn on dyndbg for drivers/net/pcs/pcs-mtk-lynxi.c and will then be informed about the created SGMII/1000Base-X/2500Base-X PCS instances. > + } > + > /* all MACs must be forced link-down before sw reset */ > for (i = 0; i < MT7530_NUM_PORTS; i++) > mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK); > @@ -2451,19 +2452,16 @@ mt7531_setup(struct dsa_switch *ds) > > mt7531_pll_setup(priv); > > - if (mt7531_dual_sgmii_supported(priv)) { > - priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; > - > + if (priv->p5_sgmii) { > /* Let ds->slave_mii_bus be able to access external phy. */ > mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK, > MT7531_EXT_P_MDC_11); > mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK, > MT7531_EXT_P_MDIO_12); > - } else { > - priv->p5_intf_sel = P5_INTF_SEL_GMAC5; > } > - dev_dbg(ds->dev, "P5 support %s interface\n", > - p5_intf_modes(priv->p5_intf_sel)); > + > + if (!dsa_is_unused_port(ds, 5)) > + priv->p5_intf_sel = P5_INTF_SEL_GMAC5; > > mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, > MT7531_GPIO0_INTERRUPT); > @@ -2523,11 +2521,6 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, > } > } > > -static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port) > -{ > - return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII); > -} > - > static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, > struct phylink_config *config) > { > @@ -2540,7 +2533,7 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, > break; > > case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ > - if (mt7531_is_rgmii_port(priv, port)) { > + if (!priv->p5_sgmii) { > phy_interface_set_rgmii(config->supported_interfaces); > break; > } > @@ -2607,7 +2600,7 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, > { > u32 val; > > - if (!mt7531_is_rgmii_port(priv, port)) { > + if (priv->p5_sgmii) { > dev_err(priv->dev, "RGMII mode is not available for port %d\n", > port); > return -EINVAL; > @@ -2860,7 +2853,7 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port) > > switch (port) { > case 5: > - if (mt7531_is_rgmii_port(priv, port)) > + if (!priv->p5_sgmii) > interface = PHY_INTERFACE_MODE_RGMII; > else > interface = PHY_INTERFACE_MODE_2500BASEX; > @@ -3019,7 +3012,7 @@ mt753x_setup(struct dsa_switch *ds) > mt7530_free_irq_common(priv); > > if (priv->create_sgmii) { > - ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv)); > + ret = priv->create_sgmii(priv); > if (ret && priv->irq) > mt7530_free_irq(priv); > } > diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h > index 703f8a528317..f58828577520 100644 > --- a/drivers/net/dsa/mt7530.h > +++ b/drivers/net/dsa/mt7530.h > @@ -679,7 +679,6 @@ typedef enum { > P5_INTF_SEL_PHY_P0, > P5_INTF_SEL_PHY_P4, > P5_INTF_SEL_GMAC5, > - P5_INTF_SEL_GMAC5_SGMII, > } p5_interface_select; > > struct mt7530_priv; > @@ -749,6 +748,8 @@ struct mt753x_info { > * @p6_interface: Holding the current port 6 interface > * @p5_interface: Holding the current port 5 interface > * @p5_intf_sel: Holding the current port 5 interface select > + * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch > + * has got SGMII > * @irq: IRQ number of the switch > * @irq_domain: IRQ domain of the switch irq_chip > * @irq_enable: IRQ enable bits, synced to SYS_INT_EN > @@ -769,6 +770,7 @@ struct mt7530_priv { > phy_interface_t p6_interface; > phy_interface_t p5_interface; > p5_interface_select p5_intf_sel; > + bool p5_sgmii; > u8 mirror_rx; > u8 mirror_tx; > struct mt7530_port ports[MT7530_NUM_PORTS]; > @@ -778,7 +780,7 @@ struct mt7530_priv { > int irq; > struct irq_domain *irq_domain; > u32 irq_enable; > - int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii); > + int (*create_sgmii)(struct mt7530_priv *priv); > }; > > struct mt7530_hw_vlan_entry { > -- > 2.37.2 >
On 21.04.2023 18:22, Daniel Golle wrote: > On Fri, Apr 21, 2023 at 05:36:29PM +0300, arinc9.unal@gmail.com wrote: >> From: Arınç ÜNAL <arinc.unal@arinc9.com> >> >> Introduce the p5_sgmii pointer to store the information for whether port 5 >> has got SGMII or not. Print "found MT7531AE" if it's got it, print "found >> MT7531BE" if it hasn't. >> >> Move the comment about MT7531AE and MT7531BE to mt7531_setup(), where the >> switch is identified. >> >> Get rid of mt7531_dual_sgmii_supported() now that priv->p5_sgmii stores the >> information. Address the code where mt7531_dual_sgmii_supported() is used. >> >> Get rid of mt7531_is_rgmii_port() which just prints the opposite of >> priv->p5_sgmii. >> >> Remove P5_INTF_SEL_GMAC5_SGMII. The p5_interface_select enum is supposed to >> represent the mode that port 5 is used in, not the hardware information of >> port 5. Set p5_intf_sel to P5_INTF_SEL_GMAC5 instead, if port 5 is not >> dsa_is_unused_port(). >> >> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> >> --- >> drivers/net/dsa/mt7530-mdio.c | 7 ++--- >> drivers/net/dsa/mt7530.c | 49 +++++++++++++++-------------------- >> drivers/net/dsa/mt7530.h | 6 +++-- >> 3 files changed, 27 insertions(+), 35 deletions(-) >> >> diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c >> index 088533663b83..fa3ee85a99c1 100644 >> --- a/drivers/net/dsa/mt7530-mdio.c >> +++ b/drivers/net/dsa/mt7530-mdio.c >> @@ -81,17 +81,14 @@ static const struct regmap_bus mt7530_regmap_bus = { >> }; >> >> static int >> -mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii) >> +mt7531_create_sgmii(struct mt7530_priv *priv) >> { >> struct regmap_config *mt7531_pcs_config[2] = {}; >> struct phylink_pcs *pcs; >> struct regmap *regmap; >> int i, ret = 0; >> >> - /* MT7531AE has two SGMII units for port 5 and port 6 >> - * MT7531BE has only one SGMII unit for port 6 >> - */ >> - for (i = dual_sgmii ? 0 : 1; i < 2; i++) { >> + for (i = priv->p5_sgmii ? 0 : 1; i < 2; i++) { >> mt7531_pcs_config[i] = devm_kzalloc(priv->dev, >> sizeof(struct regmap_config), >> GFP_KERNEL); >> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c >> index c680873819b0..edc34be745b2 100644 >> --- a/drivers/net/dsa/mt7530.c >> +++ b/drivers/net/dsa/mt7530.c >> @@ -473,15 +473,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) >> return 0; >> } >> >> -static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) >> -{ >> - u32 val; >> - >> - val = mt7530_read(priv, MT7531_TOP_SIG_SR); >> - >> - return (val & PAD_DUAL_SGMII_EN) != 0; >> -} >> - >> static int >> mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) >> { >> @@ -496,7 +487,7 @@ mt7531_pll_setup(struct mt7530_priv *priv) >> u32 xtal; >> u32 val; >> >> - if (mt7531_dual_sgmii_supported(priv)) >> + if (priv->p5_sgmii) >> return; >> >> val = mt7530_read(priv, MT7531_CREV); >> @@ -907,8 +898,6 @@ static const char *p5_intf_modes(unsigned int p5_interface) >> return "PHY P4"; >> case P5_INTF_SEL_GMAC5: >> return "GMAC5"; >> - case P5_INTF_SEL_GMAC5_SGMII: >> - return "GMAC5_SGMII"; >> default: >> return "unknown"; >> } >> @@ -2440,6 +2429,18 @@ mt7531_setup(struct dsa_switch *ds) >> return -ENODEV; >> } >> >> + /* MT7531AE has got two SGMII units. One for port 5, one for port 6. >> + * MT7531BE has got only one SGMII unit which is for port 6. >> + */ >> + val = mt7530_read(priv, MT7531_TOP_SIG_SR); >> + >> + if ((val & PAD_DUAL_SGMII_EN) != 0) { >> + priv->p5_sgmii = true; >> + dev_info(priv->dev, "found MT7531AE\n"); >> + } else { >> + dev_info(priv->dev, "found MT7531BE\n"); > > I don't think dev_info is useful here for regular users. > If you really want this output, use dev_dbg to reduce log pollution. > Imho completely removing the else branch and only silently > setting priv->p5_sgmii is sufficient, as users can also turn on > dyndbg for drivers/net/pcs/pcs-mtk-lynxi.c and will then be informed > about the created SGMII/1000Base-X/2500Base-X PCS instances. Sounds good, I'll drop it. Arınç
© 2016 - 2024 Red Hat, Inc.