Add device node for video clock controller on Qualcomm SM8450 platform.

Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
---
Changes since V1:
 - No changes.

 arch/arm64/boot/dts/qcom/sm8450.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 31877f18dce2..863a39000630 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -760,6 +760,19 @@ gcc: clock-controller@100000 {
 				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
 		};
 
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sm8450-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo", "iface";
+			power-domains = <&rpmhpd SM8450_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		gpi_dma2: dma-controller@800000 {
 			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
-- 
2.25.1