SC7180, SM6350 and SM6375 use a rather similar hw setup for DPU, with
the main exception being that the last one requires an additional
throttle clock.
It is not well understood yet, but failing to toggle it on makes the
display hardware stall and not output any frames.
Document SM6350 and SM6375 DPU.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../bindings/display/msm/qcom,sc7180-dpu.yaml | 23 +++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
index 1fb8321d9ee8..630b11480496 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
@@ -13,7 +13,10 @@ $ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
- const: qcom,sc7180-dpu
+ enum:
+ - qcom,sc7180-dpu
+ - qcom,sm6350-dpu
+ - qcom,sm6375-dpu
reg:
items:
@@ -26,6 +29,7 @@ properties:
- const: vbif
clocks:
+ minItems: 6
items:
- description: Display hf axi clock
- description: Display ahb clock
@@ -33,8 +37,10 @@ properties:
- description: Display lut clock
- description: Display core clock
- description: Display vsync clock
+ - description: Display core throttle clock
clock-names:
+ minItems: 6
items:
- const: bus
- const: iface
@@ -42,6 +48,7 @@ properties:
- const: lut
- const: core
- const: vsync
+ - const: throttle
required:
- compatible
@@ -52,6 +59,20 @@ required:
unevaluatedProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ const: qcom,sm6375-dpu
+
+ then:
+ properties:
+ clocks:
+ minItems: 7
+
+ clock-names:
+ minItems: 7
+
examples:
- |
#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
--
2.40.1