On 7.04.2023 17:57, Devi Priya wrote:
> Add support for SMPA1 regulator node in IPQ9574.
>
> Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> Changes in V4:
> - Updated the comment as suggested by konrad
> s/Updating/Update
> s/725000uV/725mV
>
> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> index 3ae38cf327ea..bdc1434fbe67 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> @@ -44,6 +44,25 @@
> };
> };
>
> +&rpm_requests {
> + regulators {
> + compatible = "qcom,rpm-mp5496-regulators";
> +
> + ipq9574_s1: s1 {
> + /*
> + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> + * During regulator registration, kernel not knowing the initial voltage,
> + * considers it as zero and brings up the regulators with minimum supported voltage.
> + * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> + * the regulators are brought up with 725mV which is sufficient for all the
> + * corner parts to operate at 800MHz
> + */
> + regulator-min-microvolt = <725000>;
> + regulator-max-microvolt = <1075000>;
> + };
> + };
> +};
> +
> &pcie1_phy {
> status = "okay";
> };