From: Emil Renner Berthing <kernel@esmil.dk>
Add initial device tree for the JH7110 RISC-V SoC by StarFive
Technology Ltd.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 509 +++++++++++++++++++++++
1 file changed, 509 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
new file mode 100644
index 000000000000..d484ecdf93f7
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive,jh7110-crg.h>
+#include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+/ {
+ compatible = "starfive,jh7110";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ S7_0: cpu@0 {
+ compatible = "sifive,s7", "riscv";
+ reg = <0>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <8192>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <16384>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imac_zba_zbb";
+ tlb-split;
+ status = "disabled";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_1: cpu@1 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <1>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_2: cpu@2 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <2>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_3: cpu@3 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <3>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_4: cpu@4 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <4>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu4_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&S7_0>;
+ };
+
+ core1 {
+ cpu = <&U74_1>;
+ };
+
+ core2 {
+ cpu = <&U74_2>;
+ };
+
+ core3 {
+ cpu = <&U74_3>;
+ };
+
+ core4 {
+ cpu = <&U74_4>;
+ };
+ };
+ };
+ };
+
+ gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac0_rgmii_rxin";
+ #clock-cells = <0>;
+ };
+
+ gmac0_rmii_refin: gmac0-rmii-refin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac0_rmii_refin";
+ #clock-cells = <0>;
+ };
+
+ gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac1_rgmii_rxin";
+ #clock-cells = <0>;
+ };
+
+ gmac1_rmii_refin: gmac1-rmii-refin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac1_rmii_refin";
+ #clock-cells = <0>;
+ };
+
+ i2srx_bclk_ext: i2srx-bclk-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2srx_bclk_ext";
+ #clock-cells = <0>;
+ };
+
+ i2srx_lrck_ext: i2srx-lrck-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2srx_lrck_ext";
+ #clock-cells = <0>;
+ };
+
+ i2stx_bclk_ext: i2stx-bclk-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2stx_bclk_ext";
+ #clock-cells = <0>;
+ };
+
+ i2stx_lrck_ext: i2stx-lrck-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2stx_lrck_ext";
+ #clock-cells = <0>;
+ };
+
+ mclk_ext: mclk-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "mclk_ext";
+ #clock-cells = <0>;
+ };
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc";
+ #clock-cells = <0>;
+ };
+
+ rtc_osc: rtc-oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "rtc_osc";
+ #clock-cells = <0>;
+ };
+
+ tdm_ext: tdm-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "tdm_ext";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clint: timer@2000000 {
+ compatible = "starfive,jh7110-clint", "sifive,clint0";
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>,
+ <&cpu4_intc 3>, <&cpu4_intc 7>;
+ };
+
+ ccache: cache-controller@2010000 {
+ compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache";
+ reg = <0x0 0x2010000 0x0 0x4000>;
+ interrupts = <1>, <3>, <4>, <2>;
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <2048>;
+ cache-size = <2097152>;
+ cache-unified;
+ };
+
+ plic: interrupt-controller@c000000 {
+ compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>,
+ <&cpu4_intc 11>, <&cpu4_intc 9>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ riscv,ndev = <136>;
+ };
+
+ uart0: serial@10000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10000000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
+ <&syscrg JH7110_SYSCLK_UART0_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART0_APB>;
+ interrupts = <32>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart1: serial@10010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10010000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
+ <&syscrg JH7110_SYSCLK_UART1_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART1_APB>;
+ interrupts = <33>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart2: serial@10020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10020000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
+ <&syscrg JH7110_SYSCLK_UART2_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART2_APB>;
+ interrupts = <34>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@10030000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x10030000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C0_APB>;
+ interrupts = <35>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@10040000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x10040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C1_APB>;
+ interrupts = <36>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@10050000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x10050000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C2_APB>;
+ interrupts = <37>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart3: serial@12000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12000000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
+ <&syscrg JH7110_SYSCLK_UART3_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART3_APB>;
+ interrupts = <45>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart4: serial@12010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12010000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
+ <&syscrg JH7110_SYSCLK_UART4_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART4_APB>;
+ interrupts = <46>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart5: serial@12020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12020000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
+ <&syscrg JH7110_SYSCLK_UART5_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART5_APB>;
+ interrupts = <47>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@12030000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12030000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C3_APB>;
+ interrupts = <48>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@12040000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C4_APB>;
+ interrupts = <49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@12050000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12050000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C5_APB>;
+ interrupts = <50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@12060000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12060000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C6_APB>;
+ interrupts = <51>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ syscrg: clock-controller@13020000 {
+ compatible = "starfive,jh7110-syscrg";
+ reg = <0x0 0x13020000 0x0 0x10000>;
+ clocks = <&osc>, <&gmac1_rmii_refin>,
+ <&gmac1_rgmii_rxin>,
+ <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+ <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+ <&tdm_ext>, <&mclk_ext>;
+ clock-names = "osc", "gmac1_rmii_refin",
+ "gmac1_rgmii_rxin",
+ "i2stx_bclk_ext", "i2stx_lrck_ext",
+ "i2srx_bclk_ext", "i2srx_lrck_ext",
+ "tdm_ext", "mclk_ext";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ sysgpio: pinctrl@13040000 {
+ compatible = "starfive,jh7110-sys-pinctrl";
+ reg = <0x0 0x13040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>;
+ resets = <&syscrg JH7110_SYSRST_IOMUX_APB>;
+ interrupts = <86>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ aoncrg: clock-controller@17000000 {
+ compatible = "starfive,jh7110-aoncrg";
+ reg = <0x0 0x17000000 0x0 0x10000>;
+ clocks = <&osc>, <&gmac0_rmii_refin>,
+ <&gmac0_rgmii_rxin>,
+ <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+ <&syscrg JH7110_SYSCLK_APB_BUS>,
+ <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
+ <&rtc_osc>;
+ clock-names = "osc", "gmac0_rmii_refin",
+ "gmac0_rgmii_rxin", "stg_axiahb",
+ "apb_bus", "gmac0_gtxclk",
+ "rtc_osc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ aongpio: pinctrl@17020000 {
+ compatible = "starfive,jh7110-aon-pinctrl";
+ reg = <0x0 0x17020000 0x0 0x10000>;
+ resets = <&aoncrg JH7110_AONRST_IOMUX>;
+ interrupts = <85>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+};
--
2.38.1Hi Hal,
> From: Emil Renner Berthing <kernel@esmil.dk>
>
> Add initial device tree for the JH7110 RISC-V SoC by StarFive
> Technology Ltd.
>
> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
> Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
> Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 509 +++++++++++++++++++++++
> 1 file changed, 509 insertions(+)
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> new file mode 100644
> index 000000000000..d484ecdf93f7
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -0,0 +1,509 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/clock/starfive,jh7110-crg.h>
> +#include <dt-bindings/reset/starfive,jh7110-crg.h>
> +
> +/ {
> + compatible = "starfive,jh7110";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + S7_0: cpu@0 {
> + compatible = "sifive,s7", "riscv";
> + reg = <0>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <8192>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <16384>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imac_zba_zbb";
> + tlb-split;
> + status = "disabled";
> +
> + cpu0_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_1: cpu@1 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <1>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc_zba_zbb";
> + tlb-split;
> +
> + cpu1_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_2: cpu@2 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <2>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc_zba_zbb";
> + tlb-split;
> +
> + cpu2_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_3: cpu@3 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <3>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc_zba_zbb";
> + tlb-split;
> +
> + cpu3_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_4: cpu@4 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <4>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc_zba_zbb";
> + tlb-split;
> +
> + cpu4_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&S7_0>;
> + };
> +
> + core1 {
> + cpu = <&U74_1>;
> + };
> +
> + core2 {
> + cpu = <&U74_2>;
> + };
> +
> + core3 {
> + cpu = <&U74_3>;
> + };
> +
> + core4 {
> + cpu = <&U74_4>;
> + };
> + };
> + };
> + };
> +
> + gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "gmac0_rgmii_rxin";
> + #clock-cells = <0>;
> + };
> +
> + gmac0_rmii_refin: gmac0-rmii-refin-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "gmac0_rmii_refin";
> + #clock-cells = <0>;
> + };
> +
> + gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "gmac1_rgmii_rxin";
> + #clock-cells = <0>;
> + };
> +
> + gmac1_rmii_refin: gmac1-rmii-refin-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "gmac1_rmii_refin";
> + #clock-cells = <0>;
> + };
> +
> + i2srx_bclk_ext: i2srx-bclk-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "i2srx_bclk_ext";
> + #clock-cells = <0>;
> + };
> +
> + i2srx_lrck_ext: i2srx-lrck-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "i2srx_lrck_ext";
> + #clock-cells = <0>;
> + };
> +
> + i2stx_bclk_ext: i2stx-bclk-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "i2stx_bclk_ext";
> + #clock-cells = <0>;
> + };
> +
> + i2stx_lrck_ext: i2stx-lrck-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "i2stx_lrck_ext";
> + #clock-cells = <0>;
> + };
> +
> + mclk_ext: mclk-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "mclk_ext";
> + #clock-cells = <0>;
> + };
> +
> + osc: oscillator {
> + compatible = "fixed-clock";
> + clock-output-names = "osc";
> + #clock-cells = <0>;
> + };
> +
> + rtc_osc: rtc-oscillator {
> + compatible = "fixed-clock";
> + clock-output-names = "rtc_osc";
> + #clock-cells = <0>;
> + };
> +
> + tdm_ext: tdm-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "tdm_ext";
> + #clock-cells = <0>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&plic>;
Do we really need this interrupt-parent? Seems it is causing a
dependency cycle:
platform soc: Fixed dependency cycle(s) with
/soc/interrupt-controller@c000000
And seems fu740 dts doesn't have this.
Best regards,
Shengyu
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clint: timer@2000000 {
> + compatible = "starfive,jh7110-clint", "sifive,clint0";
> + reg = <0x0 0x2000000 0x0 0x10000>;
> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> + <&cpu1_intc 3>, <&cpu1_intc 7>,
> + <&cpu2_intc 3>, <&cpu2_intc 7>,
> + <&cpu3_intc 3>, <&cpu3_intc 7>,
> + <&cpu4_intc 3>, <&cpu4_intc 7>;
> + };
> +
> + ccache: cache-controller@2010000 {
> + compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache";
> + reg = <0x0 0x2010000 0x0 0x4000>;
> + interrupts = <1>, <3>, <4>, <2>;
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <2048>;
> + cache-size = <2097152>;
> + cache-unified;
> + };
> +
> + plic: interrupt-controller@c000000 {
> + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
> + reg = <0x0 0xc000000 0x0 0x4000000>;
> + interrupts-extended = <&cpu0_intc 11>,
> + <&cpu1_intc 11>, <&cpu1_intc 9>,
> + <&cpu2_intc 11>, <&cpu2_intc 9>,
> + <&cpu3_intc 11>, <&cpu3_intc 9>,
> + <&cpu4_intc 11>, <&cpu4_intc 9>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + riscv,ndev = <136>;
> + };
> +
> + uart0: serial@10000000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10000000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
> + <&syscrg JH7110_SYSCLK_UART0_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART0_APB>;
> + interrupts = <32>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart1: serial@10010000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10010000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
> + <&syscrg JH7110_SYSCLK_UART1_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART1_APB>;
> + interrupts = <33>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart2: serial@10020000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10020000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
> + <&syscrg JH7110_SYSCLK_UART2_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART2_APB>;
> + interrupts = <34>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + i2c0: i2c@10030000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x10030000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C0_APB>;
> + interrupts = <35>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@10040000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x10040000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C1_APB>;
> + interrupts = <36>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@10050000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x10050000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C2_APB>;
> + interrupts = <37>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + uart3: serial@12000000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12000000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
> + <&syscrg JH7110_SYSCLK_UART3_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART3_APB>;
> + interrupts = <45>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart4: serial@12010000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12010000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
> + <&syscrg JH7110_SYSCLK_UART4_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART4_APB>;
> + interrupts = <46>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart5: serial@12020000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12020000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
> + <&syscrg JH7110_SYSCLK_UART5_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART5_APB>;
> + interrupts = <47>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@12030000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x12030000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C3_APB>;
> + interrupts = <48>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@12040000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x12040000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C4_APB>;
> + interrupts = <49>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c@12050000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x12050000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C5_APB>;
> + interrupts = <50>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c6: i2c@12060000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x12060000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C6_APB>;
> + interrupts = <51>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + syscrg: clock-controller@13020000 {
> + compatible = "starfive,jh7110-syscrg";
> + reg = <0x0 0x13020000 0x0 0x10000>;
> + clocks = <&osc>, <&gmac1_rmii_refin>,
> + <&gmac1_rgmii_rxin>,
> + <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
> + <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
> + <&tdm_ext>, <&mclk_ext>;
> + clock-names = "osc", "gmac1_rmii_refin",
> + "gmac1_rgmii_rxin",
> + "i2stx_bclk_ext", "i2stx_lrck_ext",
> + "i2srx_bclk_ext", "i2srx_lrck_ext",
> + "tdm_ext", "mclk_ext";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + sysgpio: pinctrl@13040000 {
> + compatible = "starfive,jh7110-sys-pinctrl";
> + reg = <0x0 0x13040000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>;
> + resets = <&syscrg JH7110_SYSRST_IOMUX_APB>;
> + interrupts = <86>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + aoncrg: clock-controller@17000000 {
> + compatible = "starfive,jh7110-aoncrg";
> + reg = <0x0 0x17000000 0x0 0x10000>;
> + clocks = <&osc>, <&gmac0_rmii_refin>,
> + <&gmac0_rgmii_rxin>,
> + <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
> + <&syscrg JH7110_SYSCLK_APB_BUS>,
> + <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
> + <&rtc_osc>;
> + clock-names = "osc", "gmac0_rmii_refin",
> + "gmac0_rgmii_rxin", "stg_axiahb",
> + "apb_bus", "gmac0_gtxclk",
> + "rtc_osc";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + aongpio: pinctrl@17020000 {
> + compatible = "starfive,jh7110-aon-pinctrl";
> + reg = <0x0 0x17020000 0x0 0x10000>;
> + resets = <&aoncrg JH7110_AONRST_IOMUX>;
> + interrupts = <85>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +};
On Sun, 7 May 2023 18:03:19 +0800, Shengyu Qu wrote:
> Hi Hal,
>> From: Emil Renner Berthing <kernel@esmil.dk>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> new file mode 100644
>> index 000000000000..d484ecdf93f7
>> --- /dev/null
>> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> @@ -0,0 +1,509 @@
>> +// SPDX-License-Identifier: GPL-2.0 OR MIT
>> +/*
>> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
>> + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
>> + */
>> +
>> +/dts-v1/;
>> +#include <dt-bindings/clock/starfive,jh7110-crg.h>
>> +#include <dt-bindings/reset/starfive,jh7110-crg.h>
>> +
>> +/ {
[...]
>> +
>> + soc {
>> + compatible = "simple-bus";
>> + interrupt-parent = <&plic>;
>
> Do we really need this interrupt-parent? Seems it is causing a dependency cycle:
>
> platform soc: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
>
> And seems fu740 dts doesn't have this.
Sorry to reply too late. If we drop this line, we need to add 'interrupt-parent'
to every node which uses interrupt. And I found some other platform did the same
such as
arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
arch/riscv/boot/dts/canaan/k210.dtsi
arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
Best regards,
Hal
>
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + clint: timer@2000000 {
>> + compatible = "starfive,jh7110-clint", "sifive,clint0";
>> + reg = <0x0 0x2000000 0x0 0x10000>;
>> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
>> + <&cpu1_intc 3>, <&cpu1_intc 7>,
>> + <&cpu2_intc 3>, <&cpu2_intc 7>,
>> + <&cpu3_intc 3>, <&cpu3_intc 7>,
>> + <&cpu4_intc 3>, <&cpu4_intc 7>;
>> + };
>> +
>> + ccache: cache-controller@2010000 {
>> + compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache";
>> + reg = <0x0 0x2010000 0x0 0x4000>;
>> + interrupts = <1>, <3>, <4>, <2>;
>> + cache-block-size = <64>;
>> + cache-level = <2>;
>> + cache-sets = <2048>;
>> + cache-size = <2097152>;
>> + cache-unified;
>> + };
>> +
>> + plic: interrupt-controller@c000000 {
>> + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
>> + reg = <0x0 0xc000000 0x0 0x4000000>;
>> + interrupts-extended = <&cpu0_intc 11>,
>> + <&cpu1_intc 11>, <&cpu1_intc 9>,
>> + <&cpu2_intc 11>, <&cpu2_intc 9>,
>> + <&cpu3_intc 11>, <&cpu3_intc 9>,
>> + <&cpu4_intc 11>, <&cpu4_intc 9>;
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> + #address-cells = <0>;
>> + riscv,ndev = <136>;
>> + };
>> +
>> + uart0: serial@10000000 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0x0 0x10000000 0x0 0x10000>;
>> + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
>> + <&syscrg JH7110_SYSCLK_UART0_APB>;
>> + clock-names = "baudclk", "apb_pclk";
>> + resets = <&syscrg JH7110_SYSRST_UART0_APB>;
>> + interrupts = <32>;
>> + reg-io-width = <4>;
>> + reg-shift = <2>;
>> + status = "disabled";
>> + };
>> +
[...]
© 2016 - 2025 Red Hat, Inc.