[v4] arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs

[PATCH v4 03/11] arm64: dts: qcom: sdm8550: Fix the BAM DMA engine compatible string

Posted by Bhupesh Sharma 2 years, 8 months ago

From: Bhupesh Sharma <bhupesh.sharma@qcom-hackbox.linaro.org>

As per documentation, Qualcomm SM8550 SoC supports BAM DMA
engine v1.7.4, so use the correct compatible strings.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 9c24af40ee61..774e3295081c 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1841,7 +1841,7 @@ pcie1_phy: phy@1c0e000 {
 		};
 
 		cryptobam: dma-controller@1dc4000 {
-			compatible = "qcom,bam-v1.7.0";
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			reg = <0x0 0x01dc4000 0x0 0x28000>;
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-- 
2.38.1

Re: [PATCH v4 03/11] arm64: dts: qcom: sdm8550: Fix the BAM DMA engine compatible string

Posted by Konrad Dybcio 2 years, 8 months ago


On 31.03.2023 18:43, Bhupesh Sharma wrote:
> From: Bhupesh Sharma <bhupesh.sharma@qcom-hackbox.linaro.org>
> 
> As per documentation, Qualcomm SM8550 SoC supports BAM DMA
> engine v1.7.4, so use the correct compatible strings.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index 9c24af40ee61..774e3295081c 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -1841,7 +1841,7 @@ pcie1_phy: phy@1c0e000 {
>  		};
>  
>  		cryptobam: dma-controller@1dc4000 {
> -			compatible = "qcom,bam-v1.7.0";
> +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
>  			reg = <0x0 0x01dc4000 0x0 0x28000>;
>  			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
>  			#dma-cells = <1>;